- Dillo-dev - lists.mailman3.com

hi
by Andrés Mujica - Linux SEAQ Jan. 18, 2003

Jan. 18, 2003

i want to share with all of u this article.. sorry if it was already reported... http://freshmeat.net/articles/view/695/ by the way, dillo is a great, great browser.. is the one i use all time..

2 1

Web pages - compatibility
by Andreas Schweitzer Jan. 18, 2003

Jan. 18, 2003

Hi, Since I'm not quite sure who is maintainig the web pages I send it here : The Compatibility page should list the BSD's as follows  <LI> NetBSD (in pkgsrc) <li> FreeBSD (in the ports) <li> OpenBSD (in the ports)  I.e. OpenBSD certainly is not restricted to Version 2.9. Also the phrases in the parantheses mean something to BSD users :-) (essentially that dillo is part of the OS in a broader sense). Also, for the handhelds : NetBSD has binaries for the StrongARM and the MIPS based handhelds on their ftp sites. Cheers Andreas -- **************************** NEW ADDRESS ****************************** Hamburger Sternwarte Universitaet Hamburg Gojenbergsweg 112 Tel. ++49 40 42891 4016 D-21029 Hamburg, Germany Fax. ++49 40 42891 4198

3 4

Re: Dillo-dev -- confirmation of subscription -- request 535129
by Pierre Maon Jan. 18, 2003

Jan. 18, 2003

On Sat, 18 Jan 2003 13:41:33 +0100 dillo-dev-request(a)lists.auriga.wearlab.de wrote: > Dillo-dev -- confirmation of subscription -- request 535129 > > We have received a request from 80.200.16.25 for subscription of your > email address, <pierre.maon(a)skynet.be>, to the > dillo-dev(a)lists.auriga.wearlab.de mailing list. To confirm the > request, please send a message to > dillo-dev-request(a)lists.auriga.wearlab.de, and either: > > - maintain the subject line as is (the reply's additional "Re:" is > ok), > > - or include the following line - and only the following line - in the > message body: > > confirm 535129 > > (Simply sending a 'reply' to this message should work from most email > interfaces, since that usually leaves the subject line in the right > form.) > > If you do not wish to subscribe to this list, please simply disregard > this message. Send questions to > dillo-dev-admin(a)lists.auriga.wearlab.de. >

1 0

Freshmeat article
by Livio Baldini Soares Jan. 18, 2003

Jan. 18, 2003

Hi all, Dillo has a section on an article about Lightweight Browsers: http://freshmeat.net/articles/view/695/ Maybe someone could add this to the "Dillo In The Press!" section. best regards, -- Livio <livio(a)ime.usp.br>

2 1

cvs not compiling ?
by slymer＠slymer.org Jan. 18, 2003

Jan. 18, 2003

I'm having trouble compiling from CVS. After I get all the files updated, I do a ./configure, and after that a make. I get this: ======================================= [silviu@localhost dillo]$ make cd . && \ /bin/sh /home/silviu/Sources/dillo/missing --run automake --gnu Makefile cd . && /bin/sh /home/silviu/Sources/dillo/missing --run autoconf autoconf: Undefined macros: configure.in:153:AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile src/IO/Makefile]) configure.in:4:AC_CONFIG_SRCDIR([src/dillo.c]) WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. /bin/sh ./config.status --recheck running /bin/sh ./configure --no-create --no-recursion creating cache ./config.cache ./configure: line 549: syntax error near unexpected token `AC_CONFIG_SRCDIR(src/dillo.c)'./configure: line 549: `AC_CONFIG_SRCDIR(src/dillo.c)' make: *** [config.status] Error 2 ====================================== What am I doing wrong ? -- People tend to make rules for others and exceptions for themselves. Registered Linux user #298569

3 2

Re: [Dillo-dev] cvs not compiling ?
by Jan Stary Jan. 17, 2003

Jan. 17, 2003

Similar problem here. I just checked out, and I get hans@jorgen dillo$ pwd /home/hans/src/dillo hans@jorgen dillo$ ./configure --prefix=$HOME --disable-ipv6 [ .. no problem here, all libraries found etc .. ] config.status: executing default-1 commands hans@jorgen dillo$ make cd . && \ /bin/sh /home/hans/src/dillo/missing --run automake --gnu Makefile cd . && /bin/sh /home/hans/src/dillo/missing --run autoconf autoconf: Undefined macros: configure.in:153:AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile src/IO/Makefile]) configure.in:4:AC_CONFIG_SRCDIR([src/dillo.c]) WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. /bin/sh ./config.status --recheck running /bin/sh ./configure --prefix=/home/hans --disable-ipv6 --no-create --no-recursion creating cache ./config.cache ./configure: line 549: syntax error near unexpected token `src/dillo.c' ./configure: line 549: `AC_CONFIG_SRCDIR(src/dillo.c)' make: *** [config.status] Error 2 hans@jorgen dillo$ autoconf --version Autoconf version 2.13 hans@jorgen dillo$ m4 --version GNU m4 1.4 There must be something wrong with the configure script thinking there's no autoconf. And 'undefined macros' - is this an autoconf bug? Strangely, when I just dnl'ed the AC_CONFIG_FILES and AC_CONFIG_SRCDIR in configure.in, everything compiles ok and runs without problems. Jan On Jan 17 10:43:10, slymer(a)slymer.org wrote: : :I'm having trouble compiling from CVS. After I get all the files :updated, I do a ./configure, and after that a make. I get this: : :======================================= :[silviu@localhost dillo]$ make :cd . && \ : /bin/sh /home/silviu/Sources/dillo/missing --run automake :--gnu Makefile cd . && /bin/sh :/home/silviu/Sources/dillo/missing --run autoconf autoconf: :Undefined macros: configure.in:153:AC_CONFIG_FILES([Makefile :doc/Makefile src/Makefile src/IO/Makefile]) :configure.in:4:AC_CONFIG_SRCDIR([src/dillo.c]) WARNING: :`autoconf' is missing on your system. You should only need it :if you modified `configure.in'. You might want to :install the `Autoconf' and `GNU m4' packages. Grab them :from any GNU archive site. :/bin/sh ./config.status --recheck :running /bin/sh ./configure --no-create --no-recursion :creating cache ./config.cache :./configure: line 549: syntax error near unexpected token :`AC_CONFIG_SRCDIR(src/dillo.c)'./configure: line 549: :`AC_CONFIG_SRCDIR(src/dillo.c)' make: *** [config.status] Error :2 :====================================== : :What am I doing wrong ? : :-- :People tend to make rules for others and exceptions for :themselves. :Registered Linux user #298569 : :_______________________________________________ :Dillo-dev mailing list :Dillo-dev@lists.auriga.wearlab.de :http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev ----- End forwarded message -----

2 5

Dillo 0.7.0 idintifies itself as 0.6.6
by Jan Stary Jan. 16, 2003

Jan. 16, 2003

Firstly: thank you guys for what you did! I have just discovered dillo yesterday and it's my browser of choice since then. So fast! Now, I have applied Grigoriy's patches to d070pre-v1.tgz and it works great, except it seems this dillo 0.7.0pre1 identifies itself as "dillo/0.6.6" in my apache logs. Jan PS: What's the fuzz with the homepage. Both sourceforge and freshmeat have 0.6.x as it's last release, ????.br is dead, and wearlab.de, which seems to be the current homepage, doesn't provide the 0.7.0 tarball - I only downloaded it from Grigoriy's page ...

3 2

Re: Dillo-dev -- confirmation of subscription -- request 171913
by Pierre Maon Jan. 12, 2003

Jan. 12, 2003

On Sat, 11 Jan 2003 20:29:02 +0100 dillo-dev-request(a)auriga.wearlab.de wrote: > Dillo-dev -- confirmation of subscription -- request 171913 > > We have received a request from 80.200.21.57 for subscription of your > email address, <boussouf(a)rez-gif.supelec.fr>, to the > dillo-dev(a)lists.auriga.wearlab.de mailing list. To confirm the > request, please send a message to > dillo-dev-request(a)lists.auriga.wearlab.de, and either: > > - maintain the subject line as is (the reply's additional "Re:" is > ok), > > - or include the following line - and only the following line - in the > message body: > > confirm 171913 > > (Simply sending a 'reply' to this message should work from most email > interfaces, since that usually leaves the subject line in the right > form.) > > If you do not wish to subscribe to this list, please simply disregard > this message. Send questions to > dillo-dev-admin(a)lists.auriga.wearlab.de. >

1 0

confirm 171913
by Pierre Maon Jan. 11, 2003

Jan. 11, 2003

On Sat, 11 Jan 2003 20:29:02 +0100 dillo-dev-request(a)auriga.wearlab.de wrote: > Dillo-dev -- confirmation of subscription -- request 171913 > > We have received a request from 80.200.21.57 for subscription of your > email address, <boussouf(a)rez-gif.supelec.fr>, to the > dillo-dev(a)lists.auriga.wearlab.de mailing list. To confirm the > request, please send a message to > dillo-dev-request(a)lists.auriga.wearlab.de, and either: > > - maintain the subject line as is (the reply's additional "Re:" is > ok), > > - or include the following line - and only the following line - in the > message body: > > confirm 171913 > > (Simply sending a 'reply' to this message should work from most email > interfaces, since that usually leaves the subject line in the right > form.) > > If you do not wish to subscribe to this list, please simply disregard > this message. Send questions to > dillo-dev-admin(a)lists.auriga.wearlab.de. >

1 0

Croos compilation
by Thomas Heute Jan. 9, 2003

Jan. 9, 2003

I am getting close, i still can't link everything when i crosscompile Dillo to port on iPAQ Now i have this message: arm-linux-gcc -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/X11R6/include -g -O2 -D_REENTRANT -D_THREAD_SAFE -Wall -Waggregate-return -L/usr/local/lib -o dillo chain.o commands.o cache.o dw.o dw_aligned_page.o dw_bullet.o dw_button.o dw_container.o dw_embed_gtk.o dw_gtk_scrolled_frame.o dw_gtk_scrolled_window.o dw_gtk_statuslabel.o dw_gtk_viewport.o dw_hruler.o dw_image.o dw_list_item.o dw_marshal.o dw_page.o dw_style.o dw_table.o dw_tooltip.o dw_widget.o findtext.o web.o progressbar.o dillo.o bookmark.o dicache.o dns.o gif.o jpeg.o png.o html.o image.o misc.o interface.o history.o nav.o plain.o menu.o prefs.o colors.o bitvec.o klist.o url.o cookies.o external.o IO/libDio.a -L/skiff/local/arm-linux/lib -L/skiff/local/arm-linux/lib/X11 -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm -L/skiff/local/arm-linux/lib dns.o: In function `Dns_server': /home/theute/AppliPDA/dillo-current-arm/src/dns.c:232: undefined reference to `pthread_detach' dns.o: In function `Dns_server_req': /home/theute/AppliPDA/dillo-current-arm/src/dns.c:316: undefined reference to `pthread_create' jpeg.o: In function `Jpeg_close': /home/theute/AppliPDA/dillo-current-arm/src/jpeg.c:131: undefined reference to `jpeg_destroy_decompress' jpeg.o: In function `Jpeg_new': /home/theute/AppliPDA/dillo-current-arm/src/jpeg.c:211: undefined reference to `jpeg_std_error' /home/theute/AppliPDA/dillo-current-arm/src/jpeg.c:214: undefined reference to `jpeg_CreateDecompress' /home/theute/AppliPDA/dillo-current-arm/src/jpeg.c:231: undefined reference to `jpeg_resync_to_restart' jpeg.o: In function `Jpeg_write': /home/theute/AppliPDA/dillo-current-arm/src/jpeg.c:274: undefined reference to `jpeg_read_header' /home/theute/AppliPDA/dillo-current-arm/src/jpeg.c:294: undefined reference to `jpeg_start_decompress' /home/theute/AppliPDA/dillo-current-arm/src/jpeg.c:304: undefined reference to `jpeg_read_scanlines' /home/theute/AppliPDA/dillo-current-arm/src/jpeg.c:316: undefined reference to `jpeg_destroy_decompress' /home/theute/AppliPDA/dillo-current-arm/src/jpeg.c:322: undefined reference to `jpeg_destroy_decompress' png.o: In function `Png_error_handling': /home/theute/AppliPDA/dillo-current-arm/src/png.c:108: undefined reference to `png_get_error_ptr' png.o: In function `Png_datainfo_callback': /home/theute/AppliPDA/dillo-current-arm/src/png.c:130: undefined reference to `png_get_progressive_ptr' /home/theute/AppliPDA/dillo-current-arm/src/png.c:133: undefined reference to `png_get_IHDR' /home/theute/AppliPDA/dillo-current-arm/src/png.c:147: undefined reference to `png_get_valid' /home/theute/AppliPDA/dillo-current-arm/src/png.c:149: undefined reference to `png_set_expand' /home/theute/AppliPDA/dillo-current-arm/src/png.c:151: undefined reference to `png_set_expand' /home/theute/AppliPDA/dillo-current-arm/src/png.c:155: undefined reference to `png_set_strip_16' /home/theute/AppliPDA/dillo-current-arm/src/png.c:161: undefined reference to `png_get_gAMA' /home/theute/AppliPDA/dillo-current-arm/src/png.c:162: undefined reference to `png_set_gamma' /home/theute/AppliPDA/dillo-current-arm/src/png.c:167: undefined reference to `png_set_gray_to_rgb' /home/theute/AppliPDA/dillo-current-arm/src/png.c:172: undefined reference to `png_set_interlace_handling' /home/theute/AppliPDA/dillo-current-arm/src/png.c:176: undefined reference to `png_read_update_info' /home/theute/AppliPDA/dillo-current-arm/src/png.c:178: undefined reference to `png_get_IHDR' /home/theute/AppliPDA/dillo-current-arm/src/png.c:181: undefined reference to `png_get_rowbytes' /home/theute/AppliPDA/dillo-current-arm/src/png.c:182: undefined reference to `png_get_channels' png.o: In function `Png_datarow_callback': /home/theute/AppliPDA/dillo-current-arm/src/png.c:218: undefined reference to `png_get_progressive_ptr' /home/theute/AppliPDA/dillo-current-arm/src/png.c:220: undefined reference to `png_progressive_combine_row' png.o: In function `Png_dataend_callback': /home/theute/AppliPDA/dillo-current-arm/src/png.c:281: undefined reference to `png_get_progressive_ptr' png.o: In function `Png_callback': /home/theute/AppliPDA/dillo-current-arm/src/png.c:324: undefined reference to `png_destroy_read_struct' /home/theute/AppliPDA/dillo-current-arm/src/png.c:352: undefined reference to `png_check_sig' /home/theute/AppliPDA/dillo-current-arm/src/png.c:358: undefined reference to `png_create_read_struct' /home/theute/AppliPDA/dillo-current-arm/src/png.c:364: undefined reference to `png_create_info_struct' /home/theute/AppliPDA/dillo-current-arm/src/png.c:369: undefined reference to `png_set_progressive_read_fn' /home/theute/AppliPDA/dillo-current-arm/src/png.c:383: undefined reference to `png_process_data' IO/libDio.a(file.o): In function `File_transfer_file': /home/theute/AppliPDA/dillo-current-arm/src/IO/file.c:167: undefined reference to `pthread_detach' IO/libDio.a(file.o): In function `File_transfer_dir': /home/theute/AppliPDA/dillo-current-arm/src/IO/file.c:205: undefined reference to `pthread_detach' IO/libDio.a(file.o): In function `File_get_dir': /home/theute/AppliPDA/dillo-current-arm/src/IO/file.c:353: undefined reference to `pthread_create' IO/libDio.a(file.o): In function `File_get_file': /home/theute/AppliPDA/dillo-current-arm/src/IO/file.c:372: undefined reference to `pthread_create' /skiff/local/arm-linux/lib/libc.so.6: undefined reference to `_dl_init_next(a)GLIBC_2.0' /skiff/local/arm-linux/lib/libglib.so: undefined reference to `getpwuid_r(a)GLIBC_2.1.2' /skiff/local/arm-linux/lib/libgdk.so: undefined reference to `shmctl(a)GLIBC_2.2' /skiff/local/arm-linux/lib/libgtk.so: undefined reference to `localeconv(a)GLIBC_2.2' /skiff/local/arm-linux/lib/libgtk.so: undefined reference to `fnmatch(a)GLIBC_2.2.3' collect2: ld returned 1 exit status Any help would be very appreciated. Thomas

2 1

gmake for Dillo failing
by robertg＠nyc.rr.com Jan. 8, 2003

Jan. 8, 2003

Hello, i recently posted stating that i had problems with 'make' and it ws suggested that i try 'gmake', well i did and the following is the error log i created to show the faliure i am getting. I am anxious to get Dillo up and running and would appreciate any insight anyone may have. thank you in advance. ( if you are cc: me: sorry robertg(a)nyc.rr.com, isn't a valid address but cmustard(a)nyc.rr.com is. ) $ sudo gmake check Making check in doc gmake[1]: Entering directory `/home/robertg/dillo-0.6.6/doc' gmake[1]: Nothing to be done for `check'. gmake[1]: Leaving directory `/home/robertg/dillo-0.6.6/doc' Making check in src gmake[1]: Entering directory `/home/robertg/dillo-0.6.6/src' Making check in IO gmake[2]: Entering directory `/home/robertg/dillo-0.6.6/src/IO' gmake[2]: Nothing to be done for `check'. gmake[2]: Leaving directory `/home/robertg/dillo-0.6.6/src/IO' gmake[2]: Entering directory `/home/robertg/dillo-0.6.6/src' gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -I/usr/local/include -I/usr/local/include/glib -I/usr/X11R6/include -g -O2 -D_REENTRANT -D_THREAD_SAFE -Wall -Waggregate-return -c png.c png.c:19: png.h: No such file or directory gmake[2]: *** [png.o] Error 1 gmake[2]: Leaving directory '/home/robertg/dillo-0.6.6/src' gmake[1]: *** [check-recursive] Error 1 gmake[1] Leaving directory '/home/robertg/dillo-0.6.6/src' gmake[1]: *** [check-recursive] Error 1

2 1

Dillo cross compilation for ipaq
by Thomas Heute Jan. 7, 2003

Jan. 7, 2003

I am cross compiling Dillo for an ipaq (after i applied a patch on it) i keep having a problem with the jpeg library. During the execution of configure i have this warning message: checking for jpeg_destroy_decompress in -ljpeg... no configure: WARNING: *** JPEG support will not be included *** Then if i try to compile the whole thing i get: arm-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/X11R6/include -g -O2 -D_REENTRANT -D_THREAD_SAFE -Wall -Waggregate-return -c jpeg.c jpeg.c:26: jpeglib.h: No such file or directory make[3]: *** [jpeg.o] Error 1 Anyone has an idea ? i am very new in cross compilation and didn't understand everything yet Thomas.

1 0

SGML question
by Sebastian Geerken Jan. 5, 2003

Jan. 5, 2003

Hi! Before I start digging to the specs, someone may answer me this question faster: Should stripping spaces from attributes done before or after the conversions of entities? E.g., if I have something like <td align="char" char=" "> is the value of the "char" attribute " " (one space) or "" (empty)? Dillo does the second, so it is not possible to align characters at spaces. BTW, does someone know a good and simple way to retrieve informations about other the user has specified via $LC_...? I need this for the standard value of the "char" attribute, which depends on the language of the document (or a content part). Sebastian

4 6

Small patch I've been working on...
by Takahiro Horie Jan. 5, 2003

Jan. 5, 2003

Hello Fellow Dillo Users! I've written a patch to show a drop down menu for images (BUG #283). I'm very new to Dillo development, so I'd like your comments on the patch. I have put it on a website at: http://wwwcsif.cs.ucdavis.edu/~horie/patch.html Please take a look, and send me comments on what I did right/wrong or could improve on. Thanks! --Takahiro

3 2

Table cell alignments
by Sebastian Geerken Jan. 5, 2003

Jan. 5, 2003

Hi! Just FYI: I'll stop working on table cell alignments (features, of course, I'll fix bugs, and implement important things I've forgotten). I've just committed changes which (imperfectly) support ALIGN=CHAR and the CHAR attribute. CHAROFF (which seems rather exotic to me, and is anyway not required, as the HTML spec says), is not supported, and I do not plan to do it. Someone interested in this should understand the "99% done" in the bug track as an encouragement to replace my name and fill the remaining1%. :-) Sebastian

1 0

off time
by Jorge Arellano Cid Jan. 5, 2003

Jan. 5, 2003

Hi there! Please don't worry if I'm out of touch for some days. I'm moving and will have to find a way to get connected from the new place... If for some reason, the off-time lengthens, I'll start working the dpi enhancements required for 0.7.0 release. Cheers Jorge.-

1 0

Seen in Slashdot
by Eric Gaudet Jan. 3, 2003

Jan. 3, 2003

Hi, the following link has been posted on /. today. It contains very interesting information about browsers usability. Interestingly enough, one of the proposals to improve user experience was proposed by Jorge last year (temporal history). http://www.cosc.canterbury.ac.nz/~andy/web_navigation.html Worthy readings. Best, EG --------- In theory, there's no difference between theory and practice. In practice, there is.

3 2

Happy new year!
by Jorge Arellano Cid Jan. 3, 2003

Jan. 3, 2003

Hi there! Is good to see you here in our new home. Things seem to be going better for dillo this year (yes, a couple of days can bear a lot of things!). The project is resuming its pace and hopefully will improve. Receive my best wishes for this year! Jorge.-

2 1

make errors won't compile
by robertg＠nyc.rr.com Jan. 2, 2003

Jan. 2, 2003

Greetings all, I am new to Dillo. I just heard about it on the openbsd.org site and it sounded like just what i'm looking for. I am having a problem with 'Make' however, i was hoping someone might be able to give some useful insight. This is a base openbsd 2.8 install, (trying it on this machine first), with nothing unusual and a GENERIC kernel. `Make check' dies with the following: #sudo make check Making check in doc Making check in src "Makefile", line 307: Need an operator Fatal errors encountered -- cannot continue *** Error code 1 Stop in /home/${user}/dillo-0.6.6 (line 161 of Makefile). I am including my `sh ./configure', which appeared ok. I realize this is a long file and post and i apologize for any unnessary bandwidth that is eatin' up by my post. -mUs cmustard(a)nyc.rr.com This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by configure, which was generated by GNU Autoconf 2.50. Invocation command line was $ ./configure ## ---------- ## ## Platform. ## ## ---------- ## hostname = my host name uname -m = i386 uname -r = 2.8 uname -s = OpenBSD uname -v = GENERIC#399 /usr/bin/uname -p = Intel Pentium (P54C) ("GenuineIntel" 586-class) /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = OpenBSD.i386 /usr/convex/getsysinfo = unknown hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH = /home/robertg/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/usr/games:/usr/X11R6/bin:. ## ------------ ## ## Core tests. ## ## ------------ ## configure:907: PATH=".;."; conftest.sh ./configure[915]: conftest.sh: not found configure:910: $? = 127 configure:956: checking for a BSD compatible install configure:1005: result: /usr/bin/install -c configure:1016: checking whether build environment is sane configure:1059: result: yes configure:1080: checking whether make sets ${MAKE} configure:1100: result: yes configure:1128: checking for working aclocal configure:1139: result: missing configure:1143: checking for working autoconf configure:1154: result: missing configure:1158: checking for working automake configure:1169: result: missing configure:1173: checking for working autoheader configure:1184: result: missing configure:1188: checking for working makeinfo configure:1195: result: found configure:1299: checking for gcc configure:1314: found /usr/bin/gcc configure:1322: result: gcc configure:1566: checking for C compiler default output configure:1569: gcc -I/usr/local/include -L/usr/local/lib conftest.c >&5 configure:1572: $? = 0 configure:1595: result: a.out configure:1600: checking whether the C compiler works configure:1606: ./a.out configure:1609: $? = 0 configure:1624: result: yes configure:1631: checking whether we are cross compiling configure:1633: result: no configure:1636: checking for executable suffix configure:1638: gcc -o conftest -I/usr/local/include -L/usr/local/lib conftest.c >&5 configure:1641: $? = 0 configure:1663: result: configure:1669: checking for object suffix configure:1687: gcc -c -I/usr/local/include conftest.c >&5 configure:1690: $? = 0 configure:1709: result: o configure:1713: checking whether we are using the GNU C compiler configure:1734: gcc -c -I/usr/local/include conftest.c >&5 configure:1737: $? = 0 configure:1740: test -s conftest.o configure:1743: $? = 0 configure:1755: result: yes configure:1761: checking whether gcc accepts -g configure:1779: gcc -c -g -I/usr/local/include conftest.c >&5 configure:1782: $? = 0 configure:1785: test -s conftest.o configure:1788: $? = 0 configure:1798: result: yes configure:1825: gcc -c -g -O2 -I/usr/local/include conftest.c >&5 conftest.c:2: syntax error before `me' configure:1828: $? = 1 configure: failed program was: #ifndef __cplusplus choke me #endif configure:1923: checking for gcc option to accept ANSI C configure:1982: gcc -c -g -O2 -I/usr/local/include conftest.c >&5 configure:1985: $? = 0 configure:1988: test -s conftest.o configure:1991: $? = 0 configure:2005: result: none needed configure:2054: checking for ranlib configure:2069: found /usr/bin/ranlib configure:2078: result: ranlib configure:2141: checking for gtk-config configure:2170: result: /usr/local/bin/gtk-config configure:2178: checking for GTK - version >= 1.2.0 configure:2281: gcc -o conftest -g -O2 -I/usr/local/include -I/usr/local/include/glib -I/usr/X11R6/include -I/usr/local/include -L/usr/local/lib conftest.c -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -lgmodule -lglib -lintl -lXext -lX11 -lm >&5 configure:2284: $? = 0 configure:2286: ./conftest configure:2289: $? = 0 configure:2305: result: yes configure:2404: checking for jpeg_destroy_decompress in -ljpeg configure:2431: gcc -o conftest -I/usr/local/include -I/usr/local/include/glib -I/usr/X11R6/include -g -O2 -D_REENTRANT -D_THREAD_SAFE -Wall -Waggregate-return -I/usr/local/include -L/usr/local/lib conftest.c -ljpeg -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -lgmodule -lglib -lintl -lXext -lX11 -lm >&5 configure:2434: $? = 0 configure:2437: test -s conftest configure:2440: $? = 0 configure:2451: result: yes configure:2468: checking how to run the C preprocessor configure:2495: gcc -E -I/usr/local/include conftest.c configure:2501: $? = 0 configure:2528: gcc -E -I/usr/local/include conftest.c configure:2525: ac_nonexistent.h: No such file or directory configure:2534: $? = 1 configure: failed program was: #line 2524 "configure" #include "confdefs.h" #include <ac_nonexistent.h> configure:2571: result: gcc -E configure:2586: gcc -E -I/usr/local/include conftest.c configure:2592: $? = 0 configure:2619: gcc -E -I/usr/local/include conftest.c configure:2616: ac_nonexistent.h: No such file or directory configure:2625: $? = 1 configure: failed program was: #line 2615 "configure" #include "confdefs.h" #include <ac_nonexistent.h> configure:2667: checking for jpeglib.h configure:2677: gcc -E -I/usr/local/include conftest.c configure:2683: $? = 0 configure:2702: result: yes configure:2667: checking for jconfig.h configure:2677: gcc -E -I/usr/local/include conftest.c configure:2683: $? = 0 configure:2702: result: yes configure:2667: checking for jerror.h configure:2677: gcc -E -I/usr/local/include conftest.c configure:2683: $? = 0 configure:2702: result: yes configure:2667: checking for jmorecfg.h configure:2677: gcc -E -I/usr/local/include conftest.c configure:2683: $? = 0 configure:2702: result: yes configure:2796: checking whether threads work with -pthread configure:2820: gcc -o conftest -I/usr/local/include -I/usr/local/include/glib -I/usr/X11R6/include -g -O2 -D_REENTRANT -D_THREAD_SAFE -Wall -Waggregate-return -I/usr/local/include -L/usr/local/lib -pthread conftest.c -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -lgmodule -lglib -lintl -lXext -lX11 -lm >&5 configure:2823: $? = 0 configure:2826: test -s conftest configure:2829: $? = 0 configure:2839: result: yes configure:2959: checking for zlibVersion in -lz configure:2986: gcc -o conftest -I/usr/local/include -I/usr/local/include/glib -I/usr/X11R6/include -g -O2 -D_REENTRANT -D_THREAD_SAFE -Wall -Waggregate-return -I/usr/local/include -L/usr/local/lib -pthread conftest.c -lz -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -lgmodule -lglib -lintl -lXext -lX11 -lm >&5 configure:2989: $? = 0 configure:2992: test -s conftest configure:2995: $? = 0 configure:3006: result: yes configure:3017: checking for png_check_sig in -lpng configure:3044: gcc -o conftest -I/usr/local/include -I/usr/local/include/glib -I/usr/X11R6/include -g -O2 -D_REENTRANT -D_THREAD_SAFE -Wall -Waggregate-return -I/usr/local/include -L/usr/local/lib -pthread conftest.c -lpng -lz -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -lgmodule -lglib -lintl -lXext -lX11 -lm >&5 ld: -lpng: no match collect2: ld returned 1 exit status configure:3047: $? = 1 configure: failed program was: #line 3025 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char png_check_sig (); int main () { png_check_sig (); ; return 0; } configure:3064: result: no configure:3087: checking for ANSI C header files configure:3101: gcc -E -I/usr/local/include conftest.c configure:3107: $? = 0 configure:3194: gcc -o conftest -I/usr/local/include -I/usr/local/include/glib -I/usr/X11R6/include -g -O2 -D_REENTRANT -D_THREAD_SAFE -Wall -Waggregate-return -I/usr/local/include -L/usr/local/lib -pthread conftest.c -lz -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -lgmodule -lglib -lintl -lXext -lX11 -lm >&5 configure:3197: $? = 0 configure:3199: ./conftest configure:3202: $? = 0 configure:3215: result: yes configure:3228: checking for fcntl.h configure:3238: gcc -E -I/usr/local/include conftest.c configure:3244: $? = 0 configure:3263: result: yes configure:3228: checking for unistd.h configure:3238: gcc -E -I/usr/local/include conftest.c configure:3244: $? = 0 configure:3263: result: yes configure:3228: checking for sys/uio.h configure:3238: gcc -E -I/usr/local/include conftest.c configure:3244: $? = 0 configure:3263: result: yes configure:3276: checking for socket configure:3313: gcc -o conftest -I/usr/local/include -I/usr/local/include/glib -I/usr/X11R6/include -g -O2 -D_REENTRANT -D_THREAD_SAFE -Wall -Waggregate-return -I/usr/local/include -L/usr/local/lib -pthread conftest.c -lz -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -lgmodule -lglib -lintl -lXext -lX11 -lm >&5 configure:3316: $? = 0 configure:3319: test -s conftest configure:3322: $? = 0 configure:3332: result: yes configure:3427: creating ./config.status ## ----------------------- ## ## Running config.status. ## ## ----------------------- ## This file was extended by config.status 2.50, executed with > ./config.status on nyc config.status:3877: creating Makefile config.status:3877: creating doc/Makefile config.status:3877: creating src/Makefile config.status:3877: creating src/IO/Makefile config.status:3969: creating config.h config.status:4110: config.h is unchanged ## ----------------- ## ## Cache variables. ## ## ----------------- ## ac_cv_c_compiler_gnu=yes ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func_socket=yes ac_cv_header_fcntl_h=yes ac_cv_header_jconfig_h=yes ac_cv_header_jerror_h=yes ac_cv_header_jmorecfg_h=yes ac_cv_header_jpeglib_h=yes ac_cv_header_stdc=yes ac_cv_header_sys_uio_h=yes ac_cv_header_unistd_h=yes ac_cv_lib_jpeg_jpeg_destroy_decompress=yes ac_cv_lib_png_png_check_sig=no ac_cv_lib_z_zlibVersion=yes ac_cv_objext=o ac_cv_path_GTK_CONFIG=/usr/local/bin/gtk-config ac_cv_path_install='/usr/bin/install -c' ac_cv_prog_CPP='gcc -E' ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_cc_g=yes ac_cv_prog_make_make_set=yes am_cv_prog_cc_stdc= ## ------------ ## ## confdefs.h. ## ## ------------ ## #define PACKAGE "dillo" #define VERSION "0.6.6" #define HAVE_JPEGLIB_H 1 #define HAVE_JCONFIG_H 1 #define HAVE_JERROR_H 1 #define HAVE_JMORECFG_H 1 #define HAVE_LIBZ 1 #define STDC_HEADERS 1 #define HAVE_FCNTL_H 1 #define HAVE_UNISTD_H 1 #define HAVE_SYS_UIO_H 1 #define HAVE_SOCKET 1 configure: exit 0

3 2

bug tracking engine
by Sebastian Geerken Dec. 31, 2002

Dec. 31, 2002

Hi! I took a look at the bug entries, and comment some of them. If not otherwise stated, I'm using the current CVS version of dillo. > [area.gif] 209 > Impact: soft error > At: run time > Type: misbehaviour > Comments: ALT image tag balloons sometimes stay present when the > balloon's window becomes inactive by consecutively opening several > new dillo windows with middle mouse button. These "ghosts" stay on > the top X layer until the balloon's window becomes active again. > HTReproduce: just open an url with many alt image tags and open > several new urls in new dillo windows from that page by clicking > the middle mouse buttons over some links. The urls you open should > have many alt tags, too. Repeat this procedure until you get the > effect. > WorkedBy: nobody Can this still be reproduced? Since this entry was made, there have been some changes related to tooltips (Dw crossing events, to be precise). It may be that this bug has been fixed in the meanwhile. If not, please report so. > [area.gif] 275 > Impact: hard error > At: run time > Type: lock > Comments: Dillo locks, with high CPU usage, at > http://www.adequacy.org/?op=displaystory;sid=2001/12/2/42056/2147 > HTReproduce: Go to > http://www.adequacy.org/?op=displaystory;sid=2001/12/2/42056/2147. > Watch the CPU-meter spike and Dillo stop responding. > WorkedBy: nobody This side has changed its contents, but it may be that performance problems with large tables caused this bug. It became better some time ago, but may be enhanced furthermore, however, with the costs of more complexity (with another column width calculation, "incremential resizing" may also be applied to DwTable). So I won't do much on this, unless there are severe performance/locking problems. > [area.gif] 355 > Impact: soft error > At: run time > Type: render bug > Comments: When rendering tables (in column oriented pages), right > column starts on the right and below left column. > HTReproduce: Visit http://www.howstuffworks.com/air-force-one.htm > WorkedBy: nobody This page is written by someone assuming that <TABLE ALIGN=LEFT> makes the table floating, instead to be aligned left (HTML 4.01 spec, section 11.2.1). Anyway, this is a common behavior of browsers, but since there is currently no code for handling floats, this is not relevant yet. > [area.gif] 374 > Impact: soft error > At: run time > Type: render bug > Comments: weird rendering with lots of overlapping text. While the > HTML is probably messed up, drawing several layers of text on top > of each other is pretty bad :) > HTReproduce: have a look at http://www.dse.co.nz > WorkedBy: nobody I do not see any problems with this page, nor with the only <frame>, at http://www.dse.co.nz/cgi-bin/dse.storefront. > [area.gif] 382 > Impact: hard error > At: run time > Type: crash > Comments: Dillo 6.6 crashes immediately when visting the following > URL: > http://deadly.org/article.php3?sid=20020914154658 > HTReproduce: Visting the following URL: > http://deadly.org/article.php3?sid=20020914154658 > WorkedBy: nobody I cannot reproduce it. Fixed in the meanwhile? > [area.gif] 387 > Impact: soft error > At: run time > Type: render bug > Comments: Rendering tables inside tables does not work correctly. > If the inner table has two rows set to 50% height of the outer > table�s height, the rows anyhow are pushed upwards not taking 100%. > HTReproduce: Make a html file with the setup described in the > comment and let dillo parse it. > WorkedBy: nobody Aside from that the HEIGHT attribute is not yet supported, rows with "height:50%" (in CSS terms) take 50% of the table height, only if the latter has been specified (CSS2 spec, section 10.5). > [area.gif] 389 > Impact: feature fault > At: run time > Type: render bug > Comments: europe.cnn.com fails to render properly (forntpage + > articles). > HTReproduce: enter > http://europe.cnn.com/ > as your URL > WorkedBy: nobody Does anyone see a difference? The only thing I've noticed is that some colors are different than in mozilla, I assume that this is due to mixing HTML attributes and CSS. Happy New Year! Sebastian

1 0

./configure & make errors
by Ralph Slooten Dec. 30, 2002

Dec. 30, 2002

Hi there, Since 4 or 5 days ago, I have not been able to compile Dillo (cvs). It yells that I am missing `Autoconf' and `GNU m4' however I do have these both (Mandrake 9.0).Then it finally bombs out during "make" with: ./configure: line 549: syntax error near unexpected token `src/dillo.c' ./configure: line 549:`AC_CONFIG_SRCDIR(src/dillo.c)' Any idea what the problem could be here, and how I can fix this? Any help would be greatly appreciated.... Greetings Ralph ==================================================================== [axllent@ws dillo]$ ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets ${MAKE}... yes checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for gcc option to accept ANSI C... none needed checking for ranlib... ranlib checking for gtk-config... /usr/bin/gtk-config checking for GTK - version >= 1.2.0... yes checking for jpeg_destroy_decompress in -ljpeg... yes checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking jpeglib.h usability... yes checking jpeglib.h presence... yes checking for jpeglib.h... yes checking jconfig.h usability... yes checking jconfig.h presence... yes checking for jconfig.h... yes checking jerror.h usability... yes checking jerror.h presence... yes checking for jerror.h... yes checking jmorecfg.h usability... yes checking jmorecfg.h presence... yes checking for jmorecfg.h... yes checking for pthread_create in -lpthread... yes checking for zlibVersion in -lz... yes checking for png_check_sig in -lpng... yes checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for unistd.h... (cached) yes checking sys/uio.h usability... yes checking sys/uio.h presence... yes checking for sys/uio.h... yes checking for socket... yes configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: creating src/IO/Makefile config.status: creating config.h config.status: executing default-1 commands [axllent@ws dillo]$ make cd . && \ /bin/sh /home/axllent/dillo/missing --run automake --gnu Makefile cd . && /bin/sh /home/axllent/dillo/missing --run autoconf autoconf: Undefined macros: configure.in:153:AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile src/IO/Makefile]) configure.in:4:AC_CONFIG_SRCDIR([src/dillo.c]) WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. /bin/sh ./config.status --recheck running /bin/sh ./configure --no-create --no-recursion creating cache ./config.cache ./configure: line 549: syntax error near unexpected token `src/dillo.c' ./configure: line 549: `AC_CONFIG_SRCDIR(src/dillo.c)' make: *** [config.status] Error 2 ==================================================================== -- http://tuxpower.f2g.net/ http://axljab.homelinux.org:8080/ "I have opinions of my own, strong opinions, but I don't always agree with them." -- George H. W. Bush

3 4

Re: Dillo-dev -- confirmation of subscription -- request 555752
by Arnaud Le Rouzic Dec. 30, 2002

Dec. 30, 2002

On Mon, 30 Dec 2002 15:58:46 +0100 dillo-dev-request(a)auriga.wearlab.de wrote: > Dillo-dev -- confirmation of subscription -- request 555752 > > We have received a request from 157.136.33.124 for subscription of > your email address, <lerouzic(a)pge.cnrs-gif.fr>, to the > dillo-dev(a)lists.auriga.wearlab.de mailing list. To confirm the > request, please send a message to > dillo-dev-request(a)lists.auriga.wearlab.de, and either: > > - maintain the subject line as is (the reply's additional "Re:" is > ok), > > - or include the following line - and only the following line - in the > message body: > > confirm 555752 > > (Simply sending a 'reply' to this message should work from most email > interfaces, since that usually leaves the subject line in the right > form.) > > If you do not wish to subscribe to this list, please simply disregard > this message. Send questions to > dillo-dev-admin(a)lists.auriga.wearlab.de.

1 0

Fwd: Re: [Dillo-dev]BR taking extra space and problem with spaces in table
by Sebastian Geerken Dec. 30, 2002

Dec. 30, 2002

Sorry, this should have gone to here.

1 0

Re: [Dillo-dev]GTK 2
by Philip Blundell Dec. 30, 2002

Dec. 30, 2002

Back in September, Jorge Arellano Cid wrote: > - GTK2 port was discussed a long time ago (BTW it's also listed > in the future goals), and the plan is to incorporate it into CVS > when the main distros start to ship GTK2. > > - Some time ago (maybe Pekka IIRC) assembled a GTK2 patch from > several other efforts, and I thought it'd be good to open a CVS > branch for it a CIPSGA, but, as you may have noticed in the front > page of our sites, we've been trying to contact CIPSGA sysadmins > for months with Livio!!! Has there been any further development on this? I think we are now at the point mentioned, in that the main distros seem to be including GTK2 support for GNOME 2. Thanks p.

2 1

prettige kerstwensen en een gelukkig nieuwjaar (fwd)
by Jorge Arellano Cid Dec. 30, 2002

Dec. 30, 2002

Hi there! I just received this message, and don't understand the languaje. It seems to be a request for some URL that doesn't display right, but I don't know. Can someone translate it and send back to the list please? Cheers Jorge.- ---------- Forwarded message ---------- Date: Sat, 28 Dec 2002 20:26:15 +0100 From: Yves <yves.pinoy(a)pandora.be> To: jcid(a)softhome.net Subject: prettige kerstwensen en een gelukkig nieuwjaar Beste, Dit is geen oproep voor geld maar voor het lezen van de problematiek en wanneer U denkt dat een morele steun deze zaak kan helpen dan vraag ik je om de petitie te ondertekenen. Bezoek het volgende adres: http://users.pandora.be/yves.pinoy Omdat een petitie slechts nut heeft wanneer veel mensen intekenen vraag ik je tevens om deze site naar je familie en vrienden te sturen

5 5

Welcome & some news
by Jorge Arellano Cid Dec. 29, 2002

Dec. 29, 2002

Hi there! After a few days watching the subscribers list grow, I think is a good time to welcome all of you to this our new home at the wearLab. We believe this new facilities will bring more pace to our internet related needs, and serve as an excellent base to keep developing dillo. The work had been hectic in the past weeks: moving the site, setting the new facilities, testing, debugging, reviewing, fixing and integrating patches an so on... In this recent past, my personal email has been flooded with dillo-related issues, so once more it's true that when the list is silent a lot of work goes behind the scenes! The plan is to integrate a few more patches I still have in the queue, before digging into dpi to make it work with unix domain sockets, and to enable automatic plugin launching. After that, a bit of testing and the next release will hopefully happen by late January. -- Santa passed near us and left a present! Look at: http://www.linuxfund.org/ This is the first grant Dillo Project receives. It's good news by all means. Thanks to all that took some time to vote! Note that this money doesn't fund the project, it will just let me continue trying with the funding initiative. This is the first priority. -- Considering that 0.7.0 wil be out soon, it'd be good to renew the screenshots page. I took some snaps (to be commited soon). The point is to have small thumbs with high definition big picture links. That way, the visitor can get a closer feel of our clean fonts and rendering. The idea is to show some well looking sites, some classic ones and the "average", to give quick and accurate insight. If you have a good site suggestion, just send the URL to the list so everyone can see! -- Best regards and happy celebrations! Jorge.-

2 1

Feature request
by Peter McConnell Dec. 27, 2002

Dec. 27, 2002

I have been using dillo fo almost 6 months for the majority of my browsing and it renders pager...really fast some sites I thought were slow, actually load immediately. The only feature that I can see that would improve dillo would be tabbed browesing, I believe this would also be a benefit on pda's. Is tabbed browsing a feature we are likely to see with dillo? regards peter -- Peter McConnell <slackpat(a)users.sourceforge.net>

1 0

Re: [Dillo-dev] Re: Dillo-dev -- confirmation of subscription -- request 878751
by TheStar Dec. 27, 2002

Dec. 27, 2002

LOL - but I did read the lines: > > > (Simply sending a 'reply' to this message should work from most email > > > interfaces, since that usually leaves the subject line in the right > > > form.)

1 0

Re: Dillo-dev -- confirmation of subscription -- request 878751
by TheStar Dec. 27, 2002

Dec. 27, 2002

On Fri, 27 Dec 2002 04:40:58 +0100 dillo-dev-request(a)auriga.wearlab.de wrote: > Dillo-dev -- confirmation of subscription -- request 878751 > > We have received a request from 202.7.209.124 for subscription of your > email address, <thestar(a)tpg.com.au>, to the > dillo-dev(a)lists.auriga.wearlab.de mailing list. To confirm the > request, please send a message to > dillo-dev-request(a)lists.auriga.wearlab.de, and either: > > - maintain the subject line as is (the reply's additional "Re:" is > ok), > > - or include the following line - and only the following line - in the > message body: > > confirm 878751 > > (Simply sending a 'reply' to this message should work from most email > interfaces, since that usually leaves the subject line in the right > form.) > > If you do not wish to subscribe to this list, please simply disregard > this message. Send questions to > dillo-dev-admin(a)lists.auriga.wearlab.de. >

1 0

new ml + site
by cfraz Dec. 20, 2002

Dec. 20, 2002

Catch the boat ! I've been listening the old list for months and like to congratulate all the dillo developpers for such a nice browser. ML changes (unsubscribe old and subscribe new) goes fine. Keep up the good job ! Franck

1 0

First Post!
by Jorge Arellano Cid Dec. 13, 2002

Dec. 13, 2002

Hi! This is just a test checking the mailing list is working... Jorge.-

1 0

´x´¤¾÷·| ¦¨´N«D¤Z»P²³¤£¦Pªº¦Û§Ú
by Eve March 13, 2002

March 13, 2002

-------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- (This safeguard is not inserted when using the registered version) -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- (This safeguard is not inserted when using the registered version) -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- --------------------------------------------------------------------

1 0