- Dillo-dev - lists.mailman3.com

[DNG] Will there be a MirDevuan "WTF"?
by miro.rovis＠croatiafidelis.hr July 23, 2015

July 23, 2015

--- I sent this message three hours ago, but didn't include the list address. Sorry! --- On Wed, Jul 22, 2015 at 10:49:34PM -0700, James Powell wrote: ( shouldn't it be like below?, by the netiqette --see KalolaZ just arrived letter in the Multi-seat thread-- ? ) > > Since you would still like it around, in opportunistic or in some other > > way that I should call it, I think a question is due. > > Can you tell to the public what is the purpose of the > > user-not-asked-about, in fact mostly user-never-even-knowing-about-it > > encrypted ssh channel that dbus sets up, along with all the > > non-GNU-compatible remote procedure calls (which are there for what > > purpose?) that dbus implements? > > > > Is that for FOSS stands for? > > > First off cool your jets, and trying call me out on knowing the > internals of an IPC in Userspace I didn't develop is very childish. > Why not? If you're promoting it, or persuading Devuan into the acceptance of it? Anyway, can anyone answer that question? > I honestly don't care if D-Bus what it does other than be a > communication and messaging relay between applications and processes, > as long as it does what it does, and doesn't infringe on anything > else. > > D-Bus is used and is a requirement for some services and software. > You're unfortunately not going to have your cake and coffee with > getting rid of D-Bus. Well then, keep it for those cases, don't put it in all the Devuan boxen by default. Will be fine! > Yes, it's not the greatest design, but it is > friendly at least to the whole UNIX spectrum. > "friendly"... No comment. > Devuan's main purpose is getting rid of systemd as a hard dependency > and allowing user choice in init software, not ripping apart every > project to cater to ever niche and fundamentalist out there preaching > what they feel is FOSS, and also to not start a witch hunt on software > projects. What fundamentalists? The Gentoo folks? Thorsten mirabilos Glaser with his MirDebian "WTF" project, a fundamentalist? Me, a fundamentalist? What do you mean? My desire to, after have achived it for me (but only in Gentoo), some freedom and some security, to teach, if we get a true-foss Devuan that can get its MirDevuan "WTF" fork for itself, to teach newbies to build their system hardened-against-intrusion and surveillance-defeating, that desire of mine a fundamentalist desire? --- The rest cut out because somewhat made disorderly and illegible by probably hotmail defaults (that the immediate sender who I'm replying to apparently uses) or for some other reason. --- Regards! -- Miroslav Rovis Zagreb, Croatia http://www.CroatiaFidelis.hr

1 0

no text wrapping on Gentoo Bugzilla
by miroslav.rovis1＠zg.ht.hr July 18, 2015

July 18, 2015

It just happened, minutes ago. Easily seen in its effects: toggle header weeding in Mutt doesn't work https://bugs.gentoo.org/show_bug.cgi?id=555180 (notice that also emerg --info that I attached has, instead of spaces, the Α displayed, such as: https://555180.bugs.gentoo.org/attachment.cgi?id=406994 2.6-r1::gentoosys-devel/autoconf: ... ) However, as I immediately after posted on: Mutt without Portage/in Local Overlay https://forums.gentoo.org/viewtopic-t-1002146-start-50.html#7781834 where the exactly same text can be perfectly readable as it is wrapped just fine, and which I explain in the immediately following post in the same topic: https://forums.gentoo.org/viewtopic-t-1002146-start-50.html#7781838 Could that Dillo's fault? The whole session of what happened online from my going online, to logging into Bugzilla, the entire posting, end the surprising look at what the post came out like, all is in these: 6d8bc1e8d0868d6864d4beb8678e13a533e813cc6f2a26ff1a14cb7cced1aec5 dump_150717_1211_g0n.pcap dc465d190560a5b7a058a2d1f996d43ef68e032fb66e4be1b265a5bfdab95630 Screen_150717_1211_g0n.mkv (the traffic dump and the screencast) just in case we would need to analyze what happened. The Dillo is the same one, like I built it back when I wrote my: A Tentative at dillo-3.1-dev ebuild https://forums.gentoo.org/viewtopic-t-1021878.html (haven't updated it since) Regards! -- Miroslav Rovis Zagreb, Croatia http://www.CroatiaFidelis.hr

1 2

Dillo 3.0.5 released
by eocene＠gmx.com July 14, 2015

July 14, 2015

All right, release is official... Thanks everyone! PS Here are the changes that found their way into ChangeLog: Image buffer/cache improvements. Fix for segfault when there's no dpid and view source is requested. Fix view-source dpi to handle null characters correctly. Made view-source dpi use CSS formatting (it's shorter and cleaner). Crosscompile/buildroot-friendly fltk-config test. Fix X11 icon name. In location bar, tend toward showing beginning of URL instead of end. Handle irix's version of vsnprintf(). INPUT, TEXTAREA placeholder attribute. Better notification when user's domainrc settings block page redirection. Fix bug with font_factor preference and CSS font-size:(larger|smaller). Recognize Menu key in keysrc. HTTPS: change cipher list to "ALL:!aNULL:!eNULL:!LOW:!EXPORT40:!RC4", disable SSL3, disable TLS compression. Avoid requesting background images if an ancestor has display:none. Ignore built-in search url if any are specified in dillorc.

2 2

The FAQ example on png/redirection not anymore accurate
by miroslav.rovis1＠zg.ht.hr July 7, 2015

July 7, 2015

Correct me if I'm wrong, but what I write is in my best understanding and with the intention to help my most used browser get even better. The FAQ entry: "Why doesn't Dillo display certain images?" at: http://www.dillo.org/FAQ.html#q28 doesn't show any of: ... ... 'blog.reuters.com' to 'ad.doubleclick.net' ... as the text currently reads, which probably means they have read our FAQ and decided to change those redirections. This is what I actually get when I uncomment the line which is commented the way the built-in default settings are, as it says in the top of ~/.dillo/dillorc to read: show_msg=YES (but it shows the same even if I leave if commented out; it's the default, I retried with it commented out: same) $ Domain: Default accept. dillo_dns_init: Here we go! (threaded) Enabling cookies as from cookiesrc... ** WARNING **: preferred sans-serif font "DejaVu Sans" not found. ** WARNING **: preferred serif font "DejaVu Serif" not found. ** WARNING **: preferred monospace font "DejaVu Sans Mono" not found. ** WARNING **: preferred cursive font "URW Chancery L" not found. ** WARNING **: preferred fantasy font "DejaVu Sans" not found. Nav_open_url: new url='about:splash' Nav_open_url: new url='http://en.wikipedia.org' Dns_server [0]: en.wikipedia.org is 91.198.174.192 2620:0:862:ed1a::1 Connecting to 91.198.174.192 Nav_open_url: new url='https://en.wikipedia.org/' Nav_open_url: new url='https://en.wikipedia.org/wiki/Main_Page' NumPendingStyleSheets=1 NumPendingStyleSheets=2 Png_error_handling: iCCP: known incorrect sRGB profile So probably the example should be changed to reflect this changed reality, so users would not get confused as they will probably see none of those 'reuters' lines in the messages on their terminal. Maybe it would be sufficient to just rewrite that item of the FAQ to mean that previously they would have seen those messages... Don't know. Again, correct me if I'm wrong. On another note, I got the new 3.0.5, as it is available in gentoo, but I have the same fonts not found issue which I had previously described (and it's there in yesterday's real output form my system, further above; it was yesterday, the delay being for unrelated reasons), and about which (the fonts not found issue) I will next send another message, with different, appropriate subject, to this list, I hope. Cheers! -- Miroslav Rovis Zagreb, Croatia http://www.CroatiaFidelis.hr

2 1

what is done with the dillo project donation money?
by eocene＠gmx.com July 6, 2015

July 6, 2015

I've wondered what is done with the dillo project donation money. Does it go toward Andreas's hosting costs or something?

1 0

Site is down?
by jcid＠dillo.org July 4, 2015

July 4, 2015

Hi there, Just noticed I can't contact the website, is it down? -- Cheers Jorge.-

3 2

Here's 3.0.5 RC1
by eocene＠gmx.com July 1, 2015

July 1, 2015

In my use of the 3.0.5 branch, there haven't been any unpleasant surprises, so let's have an RC: http://www.dillo.org/download/dillo-3.0.5-rc1.tar.bz2 If it's any comfort to have the sha256sum, it's: 484748e98b263ccd595ce349857edec4a431feb414e44cdbe86722a64387d000

6 7

Dillo version 3.1-dev hangs on http://www.nhl.com
by waltdnes＠waltdnes.org June 18, 2015

June 18, 2015

I pulled a few minutes ago and built it (8-year-old Intel Core 2 Duo running 64-bit Gentoo linux). It runs OK on CNN.COM and even the NHL mobile site http://m.nhl.com but with most of the tabs not working (Javascript, I assume). However, going to the main NHL site http://www.nhl.com hangs dillo and pegs a CPU. Here's a line of output from "top c", showing 99.2% CPU usage... 19235 waltdnes 20 0 328552 114840 11708 R 99.2 3.7 0:09.89 /home/waltdnes/.local/bin/dillo I have to pop open an xterm window and kill the pid e.g. "kill -3 19235" "dillo -v" shows "Dillo version 3.1-dev" -- Walter Dnes <waltdnes at waltdnes.org>

1 0

splash links
by eocene＠gmx.com June 15, 2015

June 15, 2015

1. freecode. Between the fact that the site's been in suspended animation for a year and there's been all of this sourceforge unpleasantness just lately, it would be nice not to link to them. 2. In my opinion, it wouldn't do any harm to remove the "News", "Additional Stuff", and "Essential Readings" links, as they have something of an Internet Circa 2002 flavor (in some ways it's a shame to think how pioneering projects like Project Gutenberg lose their preeminence as the pioneer days end, but I suppose that's the way of things). PS Been running on the 3.0.5 branch here, of course, and everything's been fine so far.

2 2

how about if we make a 3.0.5
by eocene＠gmx.com June 12, 2015

June 12, 2015

It would be nice to put out some new stuff. Primary motivations: 1. placeholder attributes for textarea/input are everywhere, and often they have no other explanation of their purpose. Having to guess "this is probably for search, this is probably for username, this is probably for password" is no fun. 2. I know there are users just trusting dillo's https, so at the least it would be good for their https dpis to have a better cipher list and to disable SSL3 and compression. And then pick out some small, safe fixes. Just to look at ChangeLog, some candidates might be: - Fix crash that's possible searching for text while page still being built. - Fix for segfault when there's no dpid and view source is requested. - Fix view-source dpi to handle null characters correctly. - Made view-source dpi use CSS formatting (it's shorter and cleaner). - Crosscompile/buildroot-friendly fltk-config test. - Fix X11 icon name. - In location bar, tend toward showing beginning of URL instead of end. - Handle irix's version of vsnprintf(). - Fix bug with font_factor preference and CSS font-size:(larger|smaller). - Recognize Menu key in keysrc. - Avoid requesting background images if an ancestor has display:none. - Ignore built-in search url if any are specified in dillorc.

2 4

[jcid@dillo.org: Re: how about if we make a 3.0.5]
by jcid＠dillo.org June 12, 2015

June 12, 2015

Ooops, I mistakenly replied private... Here's the FWD. -- Cheers Jorge.-

2 3

Google broke recently with 3.0.4 causing repush loop
by dennisn＠dennisn.mooo.com June 6, 2015

June 6, 2015

This past week or so Google (main search site, image.google) broke for me -- Dillo (3.0.4) goes into an endless "repush" loop: Nav_open_url: new url='http://images.google.com/images?q=bra' Dns_server [0]: images.google.com is 96.127.250.44 96.127.250.42 96.127.250.38 96.127.250.34 96.127.250.30 96.127.250.29 96.127.250.27 96.127.250.23 96.127.250.19 96.127.250.15 96.127.250.59 96.127.250.57 96.127.250.53 96.127.250.49 96.127.250.45 2607:f8b0:4006:80f::200e Connecting to 96.127.250.44 Nav_open_url: new url='http://images.google.com/search?q=bra&tbm=isch' Connecting to 96.127.250.44 >>>> a_Nav_repush <<<< Nav_open_url: new url='http://images.google.com/search?q=bra&tbm=isch' a_Nav_expect_done: repush! Nav_open_url: new url='http://images.google.com/search?q=bra&ie=UTF-8&tbm=isch&gbv=1&sei=zkNNVd6sI…' Connecting to 96.127.250.44 >>>> a_Nav_repush <<<< Nav_open_url: new url='http://images.google.com/search?q=bra&ie=UTF-8&tbm=isch&gbv=1&sei=zkNNVd6sI…' a_Nav_expect_done: repush! Nav_open_url: new url='http://images.google.com/search?q=bra&ie=UTF-8&tbm=isch&gbv=1&sei=zkNNVYTpK…' Connecting to 96.127.250.44 >>>> a_Nav_repush <<<< ... and so on, extermely quickly, which then results in Google temporarily blocking me since Dillo is behaving like a DDOS attacker :s. Any idea what's causing these repush'es? I'm pretty sure nothing changed on my end. Other browsers work for me (eg. Links, Uzbl). Changing the User Agent had no effect.

4 9

Patch: fix the flowchart diagram in the dw::Table class docs
by onepoint＠starurchin.org June 2, 2015

June 2, 2015

The main body of the dw::Table class documentation starts with a flowchart diagram of some dw::Table method calls. But this diagram refers to a method dw::Table::calcColumnExtremes() that is no longer used and has been renamed to dw::Table::_unused_calcColumnExtremes(). (There is a warning that GROWS made some of this documentation obsolete.) So I dug into the code and came up with a patch that I think fixes the diagram. I have attached before and after images of the diagram so that you can compare. I would love some feedback! http://starurchin.org/dillo/patch/doxygen-dw-table-hh-dependency-diagram.ht… And this patch removes dw::Table::_unused_calcColumnExtremes(). http://starurchin.org/dillo/patch/remove-dw-table-_unused_calcColumnExtreme… Comments are welcome. Regards, Jeremy Henty

2 1

Documentation in the tarball?
by sgeerken＠dillo.org June 1, 2015

June 1, 2015

Hi! Does it make sense to include all developer documentation into the tarball? As an alternative, only user documentation, plus a notice where to find the developer docs, could be included, while the rest can only be found in the repository at hg.dillo.org. I assume that someone who is interested in the internals of dillo will anyway refer to the lastest version from the Hg repository. Keeping it out of the tarball would have advantages: - It makes the tarball smaller. - We developers would not have to think that much about file sizes of the documentation: these files do not go into the tarball; and for those using the lastest version from the Hg repository, it should be reasonable to spend some more disc space. What do you think? Sebastian

3 4

Oh, list moderator...
by onepoint＠starurchin.org June 1, 2015

June 1, 2015

(I hope you will take this in the light-hearted tone that I wrote it. I don't often write poetry.) Oh, list moderator, help me please. I sent the list an email with attached PNGs. I saw there was a problem, had an itch to scratch. And that's why I was hoping you would take my patch. But I knew that you would need some actual evidence To show you what I'm saying really makes some sense. I saw a flowchart image in the HTML page And noticed with regret that it had rotted with age. It linked to a method that wasn't there no more And that's when I decided I should settle this score. I made a better version and then sent it to you And I chose to enclose the original too But sadly those two images were too big for the list So now now your mailer's told me I should cease and desist. Please, list moderator, let my work through. Whatever you may think I only did it for you. I have helped you before, I want to help you once more. But you've got to tell your mail software to open the door. Regards, Jeremy Henty

3 2

Alternative styles support?
by johnfound＠asm32.info May 26, 2015

May 26, 2015

Hi, Dillo team. Are there plans about supporting alternative page styles? I mean, those defined by <link rel="alternate stylesheet" />. This should be really easy to be implemented. In addition, if there is defined style with name="Dillo", it can be switched by default and this way to provide better support for Dillo from the web masters. Of course this behaviour can be made optional. Best Regards. -- http://fresh.flatassembler.net http://asm32.info John Found <johnfound at asm32.info>

4 10

long lines and slowness (common when viewing style sheets)
by eocene＠gmx.com May 26, 2015

May 26, 2015

Now that everyone likes to send their style sheets as one big long line, like 250k long, viewing them in dillo is slow. gprof says % cumulative self self total time seconds seconds calls s/call s/call name 32.47 1.88 1.88 189407242 0.00 0.00 lout::misc::NotSoSimpleVector<dw::Textblock::Word>::getRef(int) const 29.36 3.58 1.70 187437456 0.00 0.00 dw::Textblock::BadnessAndPenalty::lineCanBeBroken(int) 28.15 5.21 1.63 29345 0.00 0.00 dw::Textblock::wrapWordInFlow(int, bool) and I wonder whether any optimizations are possible.

2 1

view source hang
by eocene＠gmx.com May 25, 2015

May 25, 2015

If a page has null padding, viewing source doesn't complete. Example attached.

2 1

valgrind
by onepoint＠starurchin.org May 23, 2015

May 23, 2015

eocene wrote: > I note the logs still say > > date: Tue Apr 28 21:42:28 2015 +0000 > summary: BUG_MSG > > Are the https changes not playing well with your setup? Something has broken my hg access. I just noticed that my hg update job has been failing for a while, but I haven't made any changes to it ages. $ hg incoming abort: error: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:581) Can anyone help? Jeremy

2 2

not following 301 Moved Permanently
by dennisn＠dennisn.mooo.com May 20, 2015

May 20, 2015

When accessing some sites, say for example http://thepiratebay.org , wget seems to successfully follow the "301 Moved Permanently" redirects a few times, but Dillo only seems to do one redirect and then stops. The last output is: HTTP warning: Message with a body lacked Content-Type header.

1 0

No edit/delete/report Buttons in Some phpBB Forums
by miro.rovis＠croatiafidelis.hr May 14, 2015

May 14, 2015

I've been using dillo for my regular browsing for a few weeks longer than from when I started the thread: Secure: yes, Though Features Missing; and Bugs http://lists.dillo.org/pipermail/dillo-dev/2015-April/010495.html on dillo mailing list, and I'd like to help at least occasionally with the sole kind of contribution that I can offer: reporting like those in that link, as I'm not a developer, and can program very little only. I have a new one report. on issue that I only mentioned (and wouldn't know how to solve back then) over at: Grsecurity/Pax installation on Debian GNU/Linux http://forums.debian.net/viewtopic.php?f=16&t=108616&start=60#p577608 But I can try and tell more about it as I saw the same missing edit and delete buttons in: https://forum.sleuthkit.org/ where, to verify it, one would need to register, I believe. And while that registering on a specialized tool forum can take a few hours or more time to get the maintainer's approval, true, I believe it is the same kind of missing functionality and in the Debian Forums, so I guess one can verify this behavior by, if they are not, registering into Debian Forums. I have noticed the same edit and delete buttons missing in Debian Forums too, and I choose the Sleuthkit Forum, because I'm currently posting on it, and can accomplish this report with much more ease then on Debian where I am done with my posts for some time. I have a slow and lengthy (and tiring: too advanced for me) topic on Sleuthkit Forum: An Avi Video Recovery with SleuthKit http://forum.sleuthkit.org/viewtopic.php?f=6&t=2441 ) and I have actually managed to edit my posts, and I managed to delete one (only the post not replied to can be deleted on Sleutkit Forum). But not by clicking on the respective icons, as they don't show in dillo. But by issuing Ctrl-U to open the source of the page while logged in and having my topic opened in my dillo browser and searching for the right (relative) link under the icon 'edit-icon' or 'delete-icon' and reconstructing the right page, because that was the only way to do it. I did search thoroughly, and no link, even on empty surfaces, did I manage to detect under the mouse (as I didn't in Debian Forums either). This is how I found it, after saving the source for the page, which is still opened for me since I posted on it, and where I deleted the last misposted post: The page was (and will not remain available under that exact address): Re: An Avi Video Recovery with SleuthKit https://forum.sleuthkit.org/viewtopic.php?f=6&t=2441&p=2630&sid=4e30a8bd740… (which is Page 2 of 2 of the topic; for those who will try elsewhere, or who just want to get the jist reading this without trying, this is the topic page 2: https://forum.sleuthkit.org/viewtopic.php?f=6&t=2441&p=2630#p2630 but that one has, surely no edit or delete -icon(s)) I saved it as: SK_150514-10_pg2_src.php ('10' because it's post 10 of the topic, 150514 is for 2015-05-14) and, for deleting, which is quicker to show, since it can be only one instance found, only the last post: cat /Cmn/dLo/SK_150514-10_pg2_src.php | grep delete-icon | \ sed 's/\&amp;/\&/g' and that gives, in this case (surely anyone would need their own current address given by the forum phpBB, but this is the principle, and even I as the same miroRR user will still get a different one variant of the string 'sid=...' for the same page the next time), [and that gives, in this case:] </pre><tr><td bgcolor='#DD7F32'>238<td><pre> <li class="edit-icon"><a href="./posting.php?mode=edit&f=6&p=2634&sid=4e30a8bd7401b94368a85571eaebe8f2" title="Edit post">Edit post</a></li><li class="delete-icon"><a href="./posting.php?mode=delete&f=6&p=2634&sid=4e30a8bd7401b94368a85571eaebe8f2" title="Delete post">Delete post</a></li><li class="report-icon"><a href="./report.php?f=6&p=2634&sid=4e30a8bd7401b94368a85571eaebe8f2" title="Report this post">Report this post</a></li><li class="quote-icon"><a href="./posting.php?mode=quote&f=6&p=2634&sid=4e30a8bd7401b94368a85571eaebe8f2" title="Reply with quote">Reply with quote</a></li> (When grep'ing 'edit-icon', 'report-icon' or 'quote-icon' there would be two founds for each, as there are two posts.) in one line, however, but surely I prefer my Vim setting it to the usual 79 colums width, so readers in the mailing list would not have trouble viewing it as one line (I have mercy on my poor brothers in *nix ;-) ). Surely, if I will have to post this text on Gentoo Forums [*] and [**] and [***], case shown to be that this e-mail just does not send by the absolute joyous great provider of mine, urgh!, I will rather set it to around 110-120 colums width... But from that HTML code, I figured out from this segment: href="./posting.php?mode=delete&f=6&p=2634&sid=4e30a8bd7401b94368a85571eaebe8f2" that if I wanted to delete that post, I would change the address from what it looked like into: https://forum.sleuthkit.org/posting.php?mode=delete&f=6&p=2634&sid=4e30a8bd… And indeed, after hitting Enter on that address I was asked for confirmation and was able to delete the post. There are also strings to use for changing the same address into the one that would accomplish editing that post: href="./posting.php?mode=edit&f=6&p=2634&sid=4e30a8bd7401b94368a85571eaebe8f2" reporting that post: href="./report.php?f=6&p=2634&sid=4e30a8bd7401b94368a85571eaebe8f2" and quoting that post: href="./posting.php?mode=quote&f=6&p=2634&sid=4e30a8bd7401b94368a85571eaebe8f2" None of those icons, however, show in dillo for me. This is about the whole report, as I can't even dedicate time to follow the suggestion be kind unixer eocene: Secure: yes, Though Features Missing; and Bugs http://lists.dillo.org/pipermail/dillo-dev/2015-April/010500.html and get my fonts sorted in dillo... since even the regular maintainance of my system during a data recovery work is already schedule completely exhausted, let alone DIY compilations. [*] I'll post this, in case it is not sent to dillo ML by my provider, on Gentoo Forums where I have anyway been planning for some time the idea to open a topic on browsers and really recommend dillo, as the its being so sea-calm secure when compared with the big surveillor browsers outweighs the missing features such as the lack of javascript and poor support for CSS, so this would fit on Gentoo Forums. [**] And I'll open a special section for suspected censored e-mails of mine, at http://www.CroatiaFidelis.hr/foss/cenz/ . However, uncenzorizing is a lot of work, it's in the order of a tenfold work than non-censored free e-mail correspondence, so I'll do it, I hope, some time in the future. [***] START Speaking of big surveillor browsers, I usually have issues with dillo right after I use one of those: the SchmoogleMoz Fox (but freely replace it with any of the other big ones and the potential for harm like below is there!). --- I had to use it, because the freaking Croatian corporate robber Zagreba?ka banka at www.zaba.hr require the use of javascript for internet banking... --- And that certainly is an issue, the requirement of javascript and privacy/intrusion/surveillance issues, which requirement and these issues is what I want to open the topic on Gentoo on for, and which would be great that dillo managed, with some also, hopefully, speaking as an incompetent but wishful observer --incompetent because not really a programmer-- with some also new honest young hackers/developers' blood to join in among the current herd of dillo developers [[ the work needed is huuuge ]] -- I'm dreaming, brothers, dreaming of a free unsurveilled surfing available for many; dillo looks really really closest to that accomplishment in the field of today's computing which is the sole island in all of computing with potential to be unsurveilled and free users of it therefore not controlled, and which [the sole island] is the FOSS *nix, from BSD variants to Linux variants... --- And so I had to use the SchmoogleFox, and lo and behold, certain stuff in dillo would not work after the bout of only some ten (10) minutes of the Schfox use. Such as I wasn't able to accomplish anything with either Ctrl-U nor right mouse click > View page source. Dillo would crash immediately. Updated my Gentoo from my local mirror (it's kernel 4 now in Gentoo ;-) !!) ( see my topic: Air-Gapped Gentoo Install, Tentative https://forums.gentoo.org/viewtopic-t-987268.html and links therefrom, such as to cloning system, a part-topic in: Postfix smtp/TLS, Bkp/Cloning Mthd, Censorship/Intrusion https://forums.gentoo.org/viewtopic-t-999436.html for how to always be able to get renewable clean system even after intrusions ) and all now works. END [***] --- All links in this message checked and all I have found to be live before sending. -- Miroslav Rovis Zagreb, Croatia http://www.CroatiaFidelis.hr

1 0

SSL in the browser
by eocene＠gmx.com May 9, 2015

May 9, 2015

James wrote: > Every certificate that doesn't have something at the root of its chain, as it should. I'm on osx and there is no /etc/ssl/certs, so I had no roots until I started loading them. Where does OSX keep them? I'd looked on the web a bit in the past in case there was any simple consensus out there on the matter of where to check, but didn't find anything. I'll see where curl checks. Whatever they do is probably a good idea.

2 4

font size / dpi
by eocene＠gmx.com May 9, 2015

May 9, 2015

On a 125 dpi display, web pages tend to be tiny. For font_factor, dillorc claims "All font sizes are scaled by this value", but that's only true for html sizes and the css sizes like 'small' 'x-large' etc. [hmm...speaking of which, I see there's a bug in there for 'larger' and 'smaller' where we apply font_factor erroneously.] We should either change the claim or make it true. Also, I was refreshing my memory on the resolution-independent px discussion from January. Mostly it was about concern for the cost of scaling images, and I realize that we kind of have to deal with images or else everything doesn't fit together, but...it would be nice in some ways if we could at least scale font sizes by dpi (the css px ones and the assorted 14's that we have around in src/ ).

1 0

Crash with ascii text scribbled across a data structure.
by james.from.wellington＠gmail.com April 22, 2015

April 22, 2015

>From time to time, I get a most peculiar SEGV. Here's an example on fairly clean source up to c761c66 on a mac: Program received signal EXC_BAD_ACCESS, Could not access memory. Reason: 13 at address: 0x0000000000000000 0x00000001000064b7 in Fl_Widget::position (this=0x118148910, X=2003792928, Y=1869881479) at Fl_Widget.H:321 321 void position(int X,int Y) {resize(X,Y,w_,h_);} (gdb) bt #0 0x00000001000064b7 in Fl_Widget::position (this=0x118148910, X=2003792928, Y=1869881479) at Fl_Widget.H:321 #1 0x000000010008521a in dw::fltk::FltkViewport::updateCanvasWidgets (this=0x101208a10, dx=0, dy=-25) at fltkviewport.cc:502 #2 0x0000000100086492 in dw::fltk::FltkViewport::scrollTo (this=0x101208a10, x=0, y=347) at fltkviewport.cc:398 #3 0x0000000100084c10 in dw::fltk::FltkViewport::scroll (this=0x101208a10, dx=0, dy=-25) at fltkviewport.cc:413 #4 0x0000000100084c4a in dw::fltk::FltkViewport::vscrollbarChanged (this=0x101208a10) at fltkviewport.cc:156 #5 0x0000000100084c65 in dw::fltk::FltkViewport::vscrollbarCallback (vscrollbar=0x101208c90, viewportPtr=0x101208a10) at fltkviewport.cc:161 #6 0x0000000100100b13 in Fl_Widget::do_callback (this=0x101208c90, o=0x101208c90, arg=0x101208a10) at Fl_Widget.cxx:328 #7 0x000000010001a8ef in Fl_Widget::do_callback (this=0x101208c90) at Fl_Widget.H:840 #8 0x00000001001005c1 in Fl_Valuator::handle_drag (this=0x101208c90, v=347) at Fl_Valuator.cxx:95 #9 0x00000001000ec3bc in Fl_Scrollbar::handle (this=0x101208c90, event=19) at Fl_Scrollbar.cxx:142 #10 0x00000001000857d7 in dw::fltk::FltkViewport::handle (this=0x101208a10, event=19) at fltkviewport.cc:304 #11 0x00000001000ceb39 in send (o=0x101208a18, event=19) at Fl_Group.cxx:98 #12 0x00000001000cf338 in Fl_Group::handle (this=0x10053d760, event=19) at Fl_Group.cxx:254 #13 0x0000000100007aa2 in UI::handle (this=0x10053d760, event=19) at ui.cc:788 #14 0x00000001000ceb39 in send (o=0x10053d760, event=19) at Fl_Group.cxx:98 #15 0x00000001000cf338 in Fl_Group::handle (this=0x10053d6b0, event=19) at Fl_Group.cxx:254 #16 0x00000001000ceb39 in send (o=0x10053d6b0, event=19) at Fl_Group.cxx:98 #17 0x00000001000cf338 in Fl_Group::handle (this=0x10053cf60, event=19) at Fl_Group.cxx:254 #18 0x00000001000b7b94 in Fl_Window::handle (this=0x10053cf60, ev=19) at Fl.cxx:1643 #19 0x00000001000b67e0 in send (event=19, to=0x10053cf60, window=0x10053cf60) at Fl.cxx:1136 #20 0x00000001000b8ad1 in Fl::handle_ (e=19, window=0x10053cf60) at Fl.cxx:1444 #21 0x00000001000b8b7a in Fl::handle (e=19, window=0x10053cf60) at Fl.cxx:1216 #22 0x00000001000ab1b3 in cocoaMouseWheelHandler (theEvent=0x1181582b0) at Fl_cocoa.mm:943 #23 0x00000001000ab1e8 in -[FLView scrollWheel:] (self=0x101505a50, _cmd=0x7fff8965ff98, theEvent=0x1181582b0) at Fl_cocoa.mm:2250 #24 0x00007fff890580c7 in -[NSWindow sendEvent:] () #25 0x00007fff88f8cafa in -[NSApplication sendEvent:] () #26 0x00000001000aed74 in +[FLApplication sendEvent:] (self=0x1001b36d0, _cmd=0x7fff896552c0, theEvent=0x1181582b0) at Fl_cocoa.mm:1609 #27 0x00000001000ae989 in do_queued_events (time=1e+20) at Fl_cocoa.mm:749 #28 0x00000001000ae9bf in fl_wait (time=1e+20) at Fl_cocoa.mm:773 #29 0x00000001000aea86 in fl_mac_flush_and_wait (time_to_wait=1e+20) at Fl_cocoa.mm:792 #30 0x00000001000b9081 in Fl::wait (time_to_wait=1e+20) at Fl.cxx:528 #31 0x00000001000b910b in Fl::run () at Fl.cxx:589 #32 0x00000001000052a7 in main (argc=1, argv=0x7fff5fbff280) at dillo.cc:589 (gdb) print (char *)this $6 = 0x118148910 "lore ipsum the text out of the editor window in the email.\n\nMore lorem ibsum.\n\nRegards,\nJames." 0x118148910 is correctly allocated to dw::flak::ui::FltkLabelButtonResource, according to Apple's debugging malloc. I can't find, in the debugging malloc, the allocation for storing the text in the text-box. The worst cases are that someone is scribbling malloc control structures, or someone is scribbling addresses in a dillo data structure. I've seen something essentially the same where the scribble contained a URL. I'm contemplating relinking with electric fence. Regards, James.

1 0

Secure: yes, Though Features Missing; and Bugs
by miroslav.rovis1＠zg.ht.hr April 12, 2015

April 12, 2015

( I already wrote this entire message, and only then noticed eocene didn't send this to dillo-dev but only to me. But I now have to, All written. Can't correct that now. ) On Fri, Apr 03, 2015 at 08:14:36PM +0000, eocene wrote: > miroslav.rovis1 wrote: > > ukrainian at uabox ~ $ Domain: Default accept. > > By the way, if you're interested in making your browsing more secure, > you could modify your domainrc file not to have 'accept' as its default > rule. Let me first reply to this message. I really wish to start viewing dillo more comfortably first, so this will wait. But, since I started about it here, let me explain. Look here, how my dillo brings pages to me currently: https://forums.gentoo.org/viewtopic-t-1004014.html#7724054 and currently, download and open the mkv files... (So people reading later, open the, hopefully, webm files. That's how it was, talking to you in the future.) Those mkv files will, hopefully, soon be replaced with the HTML5 compliant webm files. So if opened those, that's how it shows currently. I was only able to use dillo after reverting my 1024x768 capable old monitor, to 800x600, in another display in X (:1.0 in, say, ffmpeg command line), else, I would have gone blind from effort to read. And I still have difficulty reading some of the pages. ##################################################################### The Homepage is particularly too hard to read for, I guess at least a non-insignificant though small percentage (no, not less than a small percentage number, it's not insignificant!) of visitors. The background must be very light. As soon as it is too dark, the font is not easily readable. ##################################################################### I'm not at poor-accessibility eyesight yet, I don't have problems with most of pages. I really don't. Pls. take notice of this claim of mine and value the outlined paragraph with respect to that claim! I hope this will help dillo homepage become more readable. So, first I really need the fonts, and will follow your kind advice, eocene, on the fonts, as soon as I find more free time. domainrc is great thing to try to sort too, but the other issue is urgent. Pls allow more time for me to reply to your other mail (I got two mails of kind advice from eocene. Can't go online (the SourceForge archive) to see if my bad provider and bad regime filtered some emails out from dillo-dev. Busy elsewhere. -- Miroslav Rovis Zagreb, Croatia http://www.CroatiaFidelis.hr

2 4

Documentation fixes: autolinking
by onepoint＠starurchin.org April 4, 2015

April 4, 2015

Three small patches that fix autolinking errors in the documentation. The first two escape the autolinking syntax in a few places where it was not intended to be a link. The third fixes a few places where a link was intended but the autolink syntax was not quite right. http://starurchin.org/dillo/patch/doxygen-escape-hash-characters.html http://starurchin.org/dillo/patch/doxygen-escape-double-colons.html http://starurchin.org/dillo/patch/doxygen-fix-simple-name-refs.html Comments are welcome. If these are OK I can push them myself as I have write permission. (It's actually easier for me to do it myself because Mercurial Queues does not notice when the remote repository has a patch that is identical to a patch in its queue and generates spurious errors.) Regards, Jeremy Henty

3 5

patch: provide a redirection-blocked page
by eocene＠gmx.com April 4, 2015

April 4, 2015

I was in the mood to make the use of domainrc more pleasant. Having to check the terminal for redirection-denied MSGs is no fun, and sometimes I imagine that I'm the only person who uses it due to its...limited friendliness. Patch attached.

1 0

Secure: yes, Though Features Missing; and Bugs
by miroslav.rovis1＠zg.ht.hr April 3, 2015

April 3, 2015

Hi! To me it is most important to avail myself of the security that dillo pretty much provides to me. What I can say, and recommend to anybody who has problems with `bulk collection' that they see in typical kind of actions deployed inside or on the way to, or on the way from, their machines... Sadly with `bulk collection' (previously known as `mass surveillance'; it comprises data harvesting and more) often go even worse kind of actions in privacy-repressive regimes: intrusions, even attacks... What I can say, is: I have so much fewer cases of the aforementioned issues when browsing with dillo, then I do when I have to, due to Javascript haven't yet been implemented in dillo, [than when I have to] use SchmoogleFox. So much fewer of those kind of problems! And yes, the Google, the Octopus of the Internet and the Surveillance Engine of the World, yes the Schmoog is sitting in the Firefox, in most of the regular users' machines who little depart from default configuration, and I don't think Mozilla harvesting itself can be easily disabled (you may remove direct Google harvesting/spying/other, but the Mozilla cloud is there, rest assured, for Google to use, fully!), and you can not, not that I know of an easy way --disprove me somebody!-- easily disable harvesting in Firefox... The security of dillo is generally such that I can usually rest calmly when I browse with dillo. And so I can recommend dillo to anybody who has problems with censorship, and when censorship of an oppressive regime is revealed, usually some kind of intrusion attempts, and/or attacks, are made against the one who managed to reveal it. To see more in depth about this claim of mine, read about dillo in the topics where I mention it on Gentoo Forums (just search for `dillo'): Updating and keeping your Gentoo non-poetterized https://forums.gentoo.org/viewtopic-t-1012022-start-0.html (currently three pages, dillo mentioned in 1st and 2nd. Before I close this first message, I'd like to show you this page where I demonstrated not just how the first Firefox harvest looks like on a Chinese style censorship deployed on dissenters in Croatia (that part is already posted: Google - can not open any link - malware ?? https://forums.gentoo.org/viewtopic-t-912056-start-25.html#7715646 but that topic I plan to improve adn add more content to yet) You can see that while I'm not really a programmer, I dabble with some ideas. This is my proposal for a program: https://github.com/miroR/uncenz I've been having censorship and related issues for really quite a number of years, By this current stage in my necessity-imposed research about it, I'm just about always traffic capturing when online, and you can find real and undeniable clickjacking and other intrusions (and learn about the Chinese style censorship and more; but, WARNING, the presentation is not so well made, and is unfinished) at: Postfix smtp/TLS, Bkp/Cloning Mthd, Censorship/Intrusion https://forums.gentoo.org/viewtopic-t-999436.html I believe that an objective reader, with a little time to read from my research there, can see that my praising of dillo is based on my sufficient understanding and experience. I really wish that you dillo developers may gather enough developer power to make dillo happen in the sooner rather than later future, much more capable than it already is. I can imagine what tremendous work creating and developing of a browser is! With that aim and wish in mind, I'd like to write and send another message about another buggish behavior in dillo. But in this message I can explain more about what I wrote on page 2nd of the topic already mentioned: Updating and keeping your Gentoo non-poetterized: https://forums.gentoo.org/viewtopic-t-1012022-start-25.html#7713858 > Other then one thing. dillo, which I used, has a little problem with > cache, that can be easily circumvented, but the user needs to remember > to refresh the page, and I inadvertently lost a little text... The above behavior occurs sometimes on my system, it occurs rather erratically, but rather often, when posting on Gentoo Forums. Not when posting a completely new post, but after editing an already existing post. It is easy to circumvent it, by simply, after having posted the previously edited post in question, refreshing the page which the post appears in. You can often see text literally changing upon refreshing it. The bug often occurs `in reverse', concerning posting. What I mean, is if you open a post for at least the third time --yes it must be a problem related to dillo caching; I understand so much even though I'm not a programmer, but just an advanced user-- so [if you open a post for the third time for editing], unless you refresh the editing texarea, in the same fashion: by clicking on the "Reload" button, you miight find yourself inadvertently to be editing the text that you posted the time before last, and not the immediately previous edit to this third edit of that text (even though the last text, the immediately previous, has, obviously, also been already committed, and should have been shown to you). The other bug, or is it my misconfiguration, or is it something else, I will try and write about in my next post. I sure will try and prepare the next message sson, and send it in a matter of hours or maximally a day or two. But if it does not arrive, the likelihood is that it is waiting for spies at my providers' to read it, and decide whether to send it on, or filter it out and not send it to dillo mailing list at all. Should the latter happen, pls. find that message at not much later time than maximally a day or two from now, in the topic Google - can not open any link - malware ?? https://forums.gentoo.org/viewtopic-t-912056-start-25.html surely, as a new post (which will, in that case, be yet to be written and posted there), and share the link with others on this list, please). (This note NOT related to dillo: Censorship is really a hard issue to overcome. Have a look at: Recover partly overwritten luks volume? https://forums.gentoo.org/viewtopic-t-1004014.html#7724054 --even though I praised dillo in that topic too-- nobody helped me there!) -- Miroslav Rovis Zagreb, Croatia http://www.CroatiaFidelis.hr

3 4

unicode combining chars and PRE
by eocene＠gmx.com April 3, 2015

April 3, 2015

Looking at http://doc.rust-lang.org/1.0.0-beta/book/more-strings.html#indexing-strings and I see that dillo doesn't like combining characters in PRE. Small example attached.

1 0

Documentation fixes
by onepoint＠starurchin.org March 12, 2015

March 12, 2015

I have four documentation patches ready for review that came from looking at the doxygen error output. The first is the upgrade to Doxyfile, the other three are small fixes to errors that doxygen happened to notice. I hope the extended descriptions will make everything clear. http://starurchin.org/dillo/patch/doxygen-upgrade-config.html http://starurchin.org/dillo/patch/doxygen-remove-unmatched-close-div.html http://starurchin.org/dillo/patch/doxygen-typo-nsbp-entity.html http://starurchin.org/dillo/patch/doxygen-escape-button-tag-angle-brackets.… There is more to do but I'd like to clear these out of the way first. All comments are welcome. Regards, Jeremy Henty

3 3

Problem with page positioning.
by johnfound＠asm32.info March 6, 2015

March 6, 2015

Hi all. It is my first post on this mailing list. I want to use Dillo as a HTML help browser for my program. I need it, because it has faster startup time and this is very important for a help system, where the user presses F1 and expects the help to open instantly. (What is not the case with all other browsers). Anyway, the problem I have is that when starting Dillo with URL that contains local anchor ID, it first positions properly, but short time later, (when the CSS get loaded?) it repositions the page and the needed element moves somewhere else, very far from the current page position. Example that can be tested: http://fresh.flatassembler.net/index.cgi?page=content/articles/2_FreshLibDo… Once the page is loaded (on the wrong position), pressing Ctrl+R or clicking on "Reload" button, repositions the page to the proper position. Is this problem can be easily solved? I can try to fix it by myself, but my C/C++ skills are very low and then I will need some assistance. Best Regards and thanks for the great browser. -- http://fresh.flatassembler.net http://asm32.info John Found <johnfound at asm32.info>

5 11

Dillo documentation delivered daily
by onepoint＠starurchin.org March 4, 2015

March 4, 2015

My website is up again[1] and I have added a daily build of the Dillo documentation (having noticed that the version on the Dillo site is over a year old). HTML: http://starurchin.org/dillo/doc/html/index.html tarball: http://starurchin.org/dillo/doc/dillo-doc.tar.gz (Note that the tarball has moved from its old location.) Doxygen generates quite a few errors when building the docs. I would like to fix them (if only to have less noise from my cron jobs). Would the Dillo devs be interested in the patches? Regards Jeremy Henty [1] Nginx spontaneously decided not to run until I tweaked its configuration. No idea why, but at least it is fixed.

2 1

a different lines->getRef() segfault
by eocene＠gmx.com March 2, 2015

March 2, 2015

A new page was just coming in -- seems like the same sort of problem as last time. (gdb) bt #0 0xb77bb424 in __kernel_vsyscall () #1 0xb72f9661 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 #2 0xb72fca92 in *__GI_abort () at abort.c:92 #3 0xb72f2878 in *__GI___assert_fail ( assertion=0x8151afe "i >= 0 && this->num - i > 0", file=0x8151aee "../lout/misc.hh", line=167, function=0x8151ba0 "T* lout::misc::SimpleVector<T>::getRef(int) const [with T = dw::Textblock::Line]") at assert.c:81 #4 0x080a9040 in lout::misc::SimpleVector<dw::Textblock::Line>::getRef ( this=0x953b618, i=-1) at ../lout/misc.hh:167 #5 0x080a2786 in dw::Textblock::sendSelectionEvent (this=0x916c610, eventType=dw::core::SelectionState::BUTTON_RELEASE, event=0xbfbb8180) at textblock.cc:1093 #6 0x080a24c3 in dw::Textblock::buttonReleaseImpl (this=0x916c610, event=0xbfbb8180) at textblock.cc:1008 #7 0x080d8910 in dw::core::Widget::buttonRelease (this=0x916c610, event=0xbfbb8180) at widget.cc:1027 #8 0x080cd617 in dw::core::Layout::processMouseEvent (this=0x90fc058, event=0xbfbb8180, type=dw::core::Layout::BUTTON_RELEASE) at layout.cc:1234 #9 0x080cd00e in dw::core::Layout::buttonEvent (this=0x90fc058, type=dw::core::Layout::BUTTON_RELEASE, view=0x90f9f60, numPressed=1, x=127, y=180, state=0, button=1) at layout.cc:1023 #10 0x080c46ae in dw::core::Layout::buttonRelease (this=0x90fc058, view=0x90f9f60, numPressed=1, x=127, y=180, state=0, button=1) at layout.hh:345 #11 0x080c33f7 in dw::fltk::FltkViewBase::handle (this=0x90f9f60, event=2) at fltkviewbase.cc:319 #12 0x080c5e8a in dw::fltk::FltkViewport::handle (this=0x90f9f60, event=2) at fltkviewport.cc:331 #13 0x080ded22 in send(int, Fl_Widget*, Fl_Window*) () #14 0x080dfbaf in Fl::handle_(int, Fl_Window*) () #15 0x080dff0e in Fl::handle(int, Fl_Window*) () #16 0x08107e9d in fl_handle(_XEvent const&) () #17 0x08107fbc in do_queued_events() () #18 0x0810822a in fl_wait(double) () #19 0x080e08af in Fl::wait(double) () #20 0x080e099d in Fl::run() () #21 0x08052f7a in main (argc=1, argv=0xbfbb8854) at dillo.cc:588

2 2

what's currently broken in dillo
by eocene＠gmx.com Feb. 28, 2015

Feb. 28, 2015

from my notes. I think all of this was mentioned on list: --local ... reload turns off URL_SpamSafe, but there it is again upon repush. > I found that shift+arrows in the url bar is doing nothing instead > of selecting the text. Ctrl+shift+arrows work fine. dd search url not removed when dillorc has search urls. background image oddities Jan 15 jan 17 edge.org page parbreak issue another lines->getRef segfault Jorge's slashdot hang the interlaced gif on forum.thinkpads.com feb 10 news.sciencemag.org hangs As for speed, I'd spent enough time with dillo being pretty slow before those optimizations were made in the past month or two that I've somewhat lost my feel for how fast dillo is supposed to be...

3 2

outofflowmgr.cc:1527: Assertion `yReq >= 0' failed.
by eocene＠gmx.com Feb. 12, 2015

Feb. 12, 2015

outofflowmgr.cc:1527: void dw::OutOfFlowMgr::tellFloatPosition(dw::core::Widget*, int): Assertion `yReq >= 0' failed. At http://darwinday.org/events/ #0 0xb775e424 in __kernel_vsyscall () #1 0xb7083661 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 #2 0xb7086a92 in *__GI_abort () at abort.c:92 #3 0xb707c878 in *__GI___assert_fail (assertion=0x8158124 "yReq >= 0", file=0x8158073 "outofflowmgr.cc", line=1527, function=0x81584a0 "void dw::OutOfFlowMgr::tellFloatPosition(dw::core::Widget*, int)") at assert.c:81 #4 0x080b8016 in dw::OutOfFlowMgr::tellFloatPosition (this=0x844f5b0, widget= 0x8cda630, yReq=-1348746332) at outofflowmgr.cc:1527 #5 0x080b7fdd in dw::OutOfFlowMgr::tellPosition (this=0x844f5b0, widget=0x8cda630, yReq=-1348746332) at outofflowmgr.cc:1516 #6 0x080aed85 in dw::Textblock::wrapWordInFlow (this=0x844ed10, wordIndex=9, wrapAll=true) at textblock_linebreaking.cc:788 #7 0x080ae8c0 in dw::Textblock::wordWrap (this=0x844ed10, wordIndex=9, wrapAll=true) at textblock_linebreaking.cc:606 #8 0x080b1842 in dw::Textblock::showMissingLines (this=0x844ed10) at textblock_linebreaking.cc:2113 #9 0x080a431d in dw::Textblock::sizeRequestImpl (this=0x844ed10, requisition=0xbfeaa950) at textblock.cc:342 #10 0x080dafc0 in dw::core::Widget::sizeRequest (this=0x844ed10, requisition=0xbfeaa950) at widget.cc:494 #11 0x080b71c7 in dw::OutOfFlowMgr::doFloatsExceedCB (this=0x844f5b0, side=dw::OutOfFlowMgr::LEFT) at outofflowmgr.cc:1045 #12 0x080b67ae in dw::OutOfFlowMgr::sizeAllocateEnd (this=0x844f5b0, caller=0x844ed10) at outofflowmgr.cc:651 #13 0x080a4e6b in dw::Textblock::sizeAllocateImpl (this=0x844ed10, allocation=0xbfeaab00) at textblock.cc:759 #14 0x080dbe93 in dw::core::Widget::sizeAllocate (this=0x844ed10, allocation=0xbfeaab00) at widget.cc:993 #15 0x080a4d8d in dw::Textblock::sizeAllocateImpl (this=0x8468b58, allocation=0xbfeaabf0) at textblock.cc:744 #16 0x080dbe93 in dw::core::Widget::sizeAllocate (this=0x8468b58, allocation=0xbfeaabf0) at widget.cc:993 #17 0x080a4d8d in dw::Textblock::sizeAllocateImpl (this=0x8468278, allocation=0xbfeaace0) at textblock.cc:744 #18 0x080dbe93 in dw::core::Widget::sizeAllocate (this=0x8468278, allocation=0xbfeaace0) at widget.cc:993 #19 0x080a4d8d in dw::Textblock::sizeAllocateImpl (this=0x89c7ed8, allocation=0xbfeaadd0) at textblock.cc:744 #20 0x080dbe93 in dw::core::Widget::sizeAllocate (this=0x89c7ed8, allocation=0xbfeaadd0) at widget.cc:993 #21 0x080a4d8d in dw::Textblock::sizeAllocateImpl (this=0x8a04228, allocation=0xbfeaaeb0) at textblock.cc:744 #22 0x080dbe93 in dw::core::Widget::sizeAllocate (this=0x8a04228, #23 0x080d0230 in dw::core::Layout::resizeIdle (this=0x83a3688) at layout.cc:912 #24 0x080be150 in dw::fltk::FltkPlatform::generalIdle (this=0x83946e0) at fltkplatform.cc:630 #25 0x080be0d8 in dw::fltk::FltkPlatform::generalStaticIdle (data=0x83946e0) at fltkplatform.cc:620 #26 0x08106e5c in call_idle() () #27 0x080e3eb5 in Fl::wait(double) () #28 0x080e3ff5 in Fl::run() () #29 0x08053b6f in main (argc=2, argv=0xbfeab0d4) at dillo.cc:590

1 0

page that hangs
by eocene＠gmx.com Feb. 10, 2015

Feb. 10, 2015

news.sciencemag.org Under gdb, breaking in and having a look at the backtrace always showed a series of rewrap()... (gdb) bt #0 0x08051680 in mcount at plt () #1 0x080b753f in lout::object::TypedPointer<dw::Textblock>::~TypedPointer ( this=0xbfffedf4, __in_chrg=<optimized out>) at ../lout/object.hh:115 #2 0x080b5b36 in dw::OutOfFlowMgr::getTextblock (this=0x825aa00, textblock=0x862f5e0) at outofflowmgr.cc:1956 #3 0x080b6aa1 in dw::OutOfFlowMgr::getAllocation (this=0x825aa00, textblock=0x862f5e0) at outofflowmgr.hh:252 #4 0x080b288c in dw::OutOfFlowMgr::Float::ComparePosition::compare ( this=0xbfffef7c, o1=0xbfffef28, o2=0x83eb728) at outofflowmgr.cc:233 #5 0x080db204 in lout::container::untyped::Vector::bsearch (this=0x82466c8, key=0xbfffef28, mustExist=false, start=0, end=5, comparator=0xbfffef7c) at container.cc:239 #6 0x080b6d8b in lout::container::typed::Vector<dw::OutOfFlowMgr::Float>::bsearch (this=0x82466b0, key=0xbfffef28, mustExist=false, start=0, end=5, comparator=0xbfffef7c) at ../lout/container.hh:451 #7 0x080b2cba in dw::OutOfFlowMgr::SortedFloatsVector::find (this=0x82466b0, textblock=0x862f5e0, y=61080, start=0, end=5) at outofflowmgr.cc:385 #8 0x080b2d73 in dw::OutOfFlowMgr::SortedFloatsVector::findFirst ( this=0x82466b0, textblock=0x862f5e0, y=61080, h=1, lastGB=0x862f5e0, lastExtIndex=-1, lastReturn=0x0) at outofflowmgr.cc:432 #9 0x080b6069 in dw::OutOfFlowMgr::getFloatHeight (this=0x825aa00, textblock=0x862f5e0, side=dw::OutOfFlowMgr::LEFT, y=61080, h=1, lastGB=0x862f5e0, lastExtIndex=-1) at outofflowmgr.cc:2143 #10 0x080b5fc5 in dw::OutOfFlowMgr::getLeftFloatHeight (this=0x825aa00, textblock=0x862f5e0, y=61080, h=1, lastGB=0x862f5e0, lastExtIndex=-1) at outofflowmgr.cc:2125 #11 0x080ae637 in dw::Textblock::calcBorders (this=0x862f5e0, lastOofRef=-1, height=1) at textblock_linebreaking.cc:2058 #12 0x080ac011 in dw::Textblock::balanceBreakPosAndHeight (this=0x862f5e0, wordIndex=0, firstIndex=0, searchUntil=0xbffff168, tempNewLine=false, penaltyIndex=0, borderIsCalculated=true, thereWillBeMoreSpace=0xbffff16f, wrapAll=false, diffWords=0xbffff170, wordIndexEnd=0xbffff164, lastFloatPos=0xbffff158, regardBorder=true, height=0xbffff160, breakPos=0xbffff15c) at textblock_linebreaking.cc:910 #13 0x080abc03 in dw::Textblock::wrapWordInFlow (this=0x862f5e0, wordIndex=0, wrapAll=false) at textblock_linebreaking.cc:746 #14 0x080ab87c in dw::Textblock::wordWrap (this=0x862f5e0, wordIndex=0, wrapAll=false) at textblock_linebreaking.cc:606 #15 0x080ae17c in dw::Textblock::rewrap (this=0x862f5e0) at textblock_linebreaking.cc:1891 #16 0x080a12ce in dw::Textblock::sizeRequestImpl (this=0x862f5e0, requisition=0x8635f80) at textblock.cc:341 #17 0x080d7f7c in dw::core::Widget::sizeRequest (this=0x862f5e0, requisition=0x8635f80) at widget.cc:494 #18 0x080ae159 in dw::Textblock::rewrap (this=0x862f098) at textblock_linebreaking.cc:1889 #19 0x080a12ce in dw::Textblock::sizeRequestImpl (this=0x862f098, requisition=0x862f370) at textblock.cc:341 #20 0x080d7f7c in dw::core::Widget::sizeRequest (this=0x862f098, requisition=0x862f370) at widget.cc:494 #21 0x080ae159 in dw::Textblock::rewrap (this=0x862ea18) at textblock_linebreaking.cc:1889 #22 0x080a12ce in dw::Textblock::sizeRequestImpl (this=0x862ea18, requisition=0x862ee18) at textblock.cc:341 #23 0x080d7f7c in dw::core::Widget::sizeRequest (this=0x862ea18, requisition=0x862ee18) at widget.cc:494 #24 0x080ae159 in dw::Textblock::rewrap (this=0x862b748) at textblock_linebreaking.cc:1889 #25 0x080a12ce in dw::Textblock::sizeRequestImpl (this=0x862b748, requisition=0x862b9f8) at textblock.cc:341 #26 0x080d7f7c in dw::core::Widget::sizeRequest (this=0x862b748, requisition=0x862b9f8) at widget.cc:494 #27 0x080ae159 in dw::Textblock::rewrap (this=0x862b0a0) at textblock_linebreaking.cc:1889 #28 0x080a12ce in dw::Textblock::sizeRequestImpl (this=0x862b0a0, requisition=0x862b478) at textblock.cc:341 #29 0x080d7f7c in dw::core::Widget::sizeRequest (this=0x862b0a0, requisition=0x862b478) at widget.cc:494 #30 0x080ae159 in dw::Textblock::rewrap (this=0x835e868) at textblock_linebreaking.cc:1889 #31 0x080a12ce in dw::Textblock::sizeRequestImpl (this=0x835e868, requisition=0x855357c) at textblock.cc:341 #32 0x080d7f7c in dw::core::Widget::sizeRequest (this=0x835e868, requisition=0x855357c) at widget.cc:494 #33 0x080ae159 in dw::Textblock::rewrap (this=0x82846b8) at textblock_linebreaking.cc:1889 #34 0x080a12ce in dw::Textblock::sizeRequestImpl (this=0x82846b8, requisition=0xbffff750) at textblock.cc:341 #35 0x080d7f7c in dw::core::Widget::sizeRequest (this=0x82846b8, requisition=0xbffff750) at widget.cc:494 #36 0x080b4183 in dw::OutOfFlowMgr::doFloatsExceedCB (this=0x825aa00, side=dw::OutOfFlowMgr::LEFT) at outofflowmgr.cc:1045 #37 0x080b376a in dw::OutOfFlowMgr::sizeAllocateEnd (this=0x825aa00, caller=0x82846b8) at outofflowmgr.cc:651 #38 0x080a1e27 in dw::Textblock::sizeAllocateImpl (this=0x82846b8, allocation=0xbffff8f0) at textblock.cc:759 #39 0x080d8e4f in dw::core::Widget::sizeAllocate (this=0x82846b8, allocation=0xbffff8f0) at widget.cc:993 #40 0x080cd1ec in dw::core::Layout::resizeIdle (this=0x81f2940) at layout.cc:912 #41 0x080bb10c in dw::fltk::FltkPlatform::generalIdle (this=0x81e2d38) at fltkplatform.cc:630 #42 0x080bb094 in dw::fltk::FltkPlatform::generalStaticIdle (data=0x81e2d38) at fltkplatform.cc:620 #43 0x08103e18 in call_idle() () #44 0x080e0e71 in Fl::wait(double) () #45 0x080e0fb1 in Fl::run() () #46 0x08052f7a in main (argc=1, argv=0xbffffb14) at dillo.cc:588

1 0

Core-dump pasting from one form field into another
by james.from.wellington＠gmail.com Feb. 2, 2015

Feb. 2, 2015

Hello All, This is exercisable in Dillo 3.0.4.1, but not new. I found it by accident in my hack-up of Dillo 3.0.4. The reproduction is: - enable cookies for .google.com - navigate to https://mail.google.com/mail/?ui=html - fight the links until you get a screen with two fields, one for the username and one for the password - type something into the username field - select it and drag to the password field -- core dump I am on: - OSX 10.6.8 - Dillo 3.0.4.1 with SSL enabled - FLTK 1.3.3 - with dpid, etc from Dillo 3.0.4 with extensive hacking so the fault could be Mac-specific. Essentially the same fault (in Fl::dnd()) is reproducible in clean Dillo 3.0.4, with FLTK 1.3.2, clean dpid, etc, so I *think* it's not a product of my hackery. Clean Dillo 3.0.4 does not report the CGContextSetShouldAntialias and related errors, so I *think* that they are unrelated. Some errors and backtrace below. So far, I have not reproduced this fault in the FLTK input test program. Does anyone have a favourite piece of form html for me to try, to see if we can get out of needing gmail for the reproduction. Regards, James. ======================== Sat Dec 27 12:16:00 James-MacBook.local dillo[93125] <Error>: CGContextSetShouldAntialias: invalid context 0x0 Sat Dec 27 12:16:00 James-MacBook.local dillo[93125] <Error>: CGContextSetTextPosition: invalid context 0x0 Sat Dec 27 12:16:00 James-MacBook.local dillo[93125] <Error>: CGContextSetShouldAntialias: invalid context 0x0 Sat Dec 27 12:16:00 James-MacBook.local dillo[93125] <Error>: CGContextSetShouldAntialias: invalid context 0x0 Program received signal EXC_BAD_ACCESS, Could not access memory. Reason: KERN_INVALID_ADDRESS at address: 0x0000000000000000 0x00007fff8a1cd7cd in __dynamic_cast () (gdb) bt #0 0x00007fff8a1cd7cd in __dynamic_cast () #1 0x000000010009b318 in Fl::dnd () at Fl_cocoa.mm:3792 #2 0x00000001000aee3f in Fl_Input::handle (this=<value temporarily unavailable, due to optimizations>, event=<value temporarily unavailable, due to optimizations>) at Fl_Input.cxx:681 #3 0x0000000100071187 in CustInput2::handle (this=0x103c10a00, e=5) at fltkui.cc:86 #4 0x000000010009cfda in send (event=<value temporarily unavailable, due to optimizations>, to=<value temporarily unavailable, due to optimizations>, window=<value temporarily unavailable, due to optimizations>) at Fl.cxx:1143 #5 0x000000010009eaf7 in Fl::handle_ (e=5, window=0x102a1e020) at Fl.cxx:1455 #6 0x000000010009ad28 in cocoaMouseHandler (theEvent=0x100565980) at Fl_cocoa.mm:1057 #7 0x00007fff890580c7 in -[NSWindow sendEvent:] () #8 0x00007fff88f8cafa in -[NSApplication sendEvent:] () #9 0x000000010009af43 in +[FLApplication sendEvent:] (self=<value temporarily unavailable, due to optimizations>, _cmd=<value temporarily unavailable, due to optimizations>, theEvent=0x100565980) at Fl_cocoa.mm:1453 #10 0x000000010009883a in do_queued_events (time=1e+20) at Fl_cocoa.mm:772 #11 0x000000010009b175 in fl_wait [inlined] () at /Users/jamescone/buildTrees/fltk/fltk-1.3.3/src/Fl_cocoa.mm:796 #12 0x000000010009b175 in fl_mac_flush_and_wait (time_to_wait=1e+20) at Fl_cocoa.mm:815 #13 0x000000010009df39 in Fl::run () at Fl.cxx:589 #14 0x0000000100004819 in main (argc=1, argv=0x7fff5fbff3f0) at dillo.cc:572 (gdb)

4 8

an interlaced gif doesn't finish drawing
by eocene＠gmx.com Jan. 25, 2015

Jan. 25, 2015

I've consistently noticed that the image in the upper left corner of http://forum.thinkpads.com doesn't finish drawing initially. If I isolate the image or click to a second page, it'll show the whole thing properly.

1 0

form input placeholder text
by eocene＠gmx.com Jan. 24, 2015

Jan. 24, 2015

Everyone's getting into the habit of using the html5 placeholder attributes on form inputs to tell users what the inputs are for, decreasing usability for the rest of us, so I implemented it for INPUT text/password. (It's also legal on TEXTAREA.) http://www.dillo.org/test/input_placeholder.diff

1 1

How to do a local install?
by waltdnes＠waltdnes.org Jan. 22, 2015

Jan. 22, 2015

It's taken me a while to get around to trying to install from the git repository. With experimental stuff, I prefer to do things in my local directory, so that if it blows up, it doesn't blow up with root permissions. I've done this in the past with other software, so I think it can be done. Note that I'm running in Gentoo, if it makes any difference. I have fltk-1.3.2 installed with USE="opengl threads xft" enabled and other fltk options disabled. Here's my /home/waltdnes/dillo/dbuild script, which I've loosely based on instructions at http://www.dillo.org/source.html After the initial "hg clone" command, updates are pulled in by "git pull" from inside the dillo3 directory; is that correct? #!/bin/bash # hg clone http://hg.dillo.org/dillo dillo3 cd /home/waltdnes/dillo/dillo3 PREFIX=/home/waltdnes/.local CFLAGS="-O2 -march=native -fomit-frame-pointer -pipe -fno-unwind-tables -fno-asynchronous-unwind-tables" CXXFLAGS=${CFLAGS} make clean git pull ./autogen.sh ./configure make make install-strip The process works until the last step, where it's suggested to sudo, to allow installing in /usr/local It fails like so... make[4]: Entering directory '/home/waltdnes/dillo/dillo3/src' /bin/mkdir -p '/usr/local/bin' /bin/sh /home/waltdnes/dillo/dillo3/install-sh -c -s dillo '/usr/local/bin' cp: cannot create regular file '/usr/local/bin/_inst.22011_': Permission denied Makefile:538: recipe for target 'install-binPROGRAMS' failed make[4]: *** [install-binPROGRAMS] Error 1 make[4]: Leaving directory '/home/waltdnes/dillo/dillo3/src' Makefile:856: recipe for target 'install-am' failed make[3]: *** [install-am] Error 2 make[3]: Leaving directory '/home/waltdnes/dillo/dillo3/src' Makefile:695: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '/home/waltdnes/dillo/dillo3/src' Makefile:469: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '/home/waltdnes/dillo/dillo3' Makefile:767: recipe for target 'install-strip' failed make: *** [install-strip] Error 2 What settings do I need to make to get the install totally in my home directory? While I'm at it, what are the manual tweaks to enable "gif jpeg png ssl" and disable "-doc -ipv6" in the build? Can all the settings be put into local.mk, so I can "set it and forget it"? -- Walter Dnes <waltdnes at waltdnes.org>

3 3

addParbreak, display:inline
by eocene＠gmx.com Jan. 19, 2015

Jan. 19, 2015

I was looking at why the page numbers at the bottom of a startpage search results page aren't visible. It seems that the numbers are forms with display:inline. open_form has HT2TB(html)->addParbreak (9, html->wordStyle ()); Am I correct in thinking that the assorted addParbreak()s have to come out at some point for display to work, or is there some other plan? I note that the html5 spec has: "In quirks mode, the following rules are also expected to apply: ... form { margin-bottom: 1em; }" to provide the gap in this case.

1 0

resolution independent px
by Johannes.Hofmann＠gmx.de Jan. 18, 2015

Jan. 18, 2015

Hi, attached is a patch that would enable resolution independent handling of px as described in [1]. It would result in roughly equally sized images on high and low resolution devices at the cost of a higher overhead for additional image scaling. Is there a need for something like this? Should it be enabled via config option or should we do it automatically if we detect a DPI value that differs a lot from the standard value? Cheers, Johannes [1] http://www.w3.org/TR/CSS2/syndata.html#x39

5 7

should we have a dillo-announce list?
by eocene＠gmx.com Jan. 18, 2015

Jan. 18, 2015

Seems like a release announcements list would be valuable...

3 3

page doesn't finish rendering
by eocene＠gmx.com Jan. 17, 2015

Jan. 17, 2015

This page doesn't finish rendering for me: http://edge.org/responses/what-do-you-think-about-machines-that-think

1 0

background images
by eocene＠gmx.com Jan. 15, 2015

Jan. 15, 2015

Saw another case today where a forum had quoted text obscured by repeated background quotation marks. Playing around a little, the behaviour seems flaky (html and image files attached).

1 0

different rendering depending on DOCTYPE
by Johannes.Hofmann＠gmx.de Jan. 11, 2015

Jan. 11, 2015

Hi, I noticed, that firefox and chrome render stuff differently depending on the DOCTYPE. Attached is a small example. firefox doesn't show overlapping text but dillo does. When the DOCTYPE line is removed firefox renders the page as dillo does. Wikipedia has some information about the topic at [1]. I think at some point we need to handle these cases too. It would also be interesting which rule exactly prevents firefox from showing overlapping text when the DOCTYPE line is present. Cheers, Johannes [1] http://en.wikipedia.org/wiki/Quirks_mode

1 0

what's currently broken in dillo
by eocene＠gmx.com Jan. 7, 2015

Jan. 7, 2015

- vsource request crashes when dpid isn't working. - source is slow to render, seemingly something to do with large tables. - on some sites, rendering never stops as the horizontal scrollbar shows the page growing wider and wider. - on some sites, the ending words of a line are missing. - img alt text not constrained by width/height. - --local : reload turns off URL_SpamSafe, but there it is again upon repush. - "shift+arrows in the url bar is doing nothing instead of selecting the text".

6 38

here's 3.0.4.1 RC1
by eocene＠gmx.com Jan. 1, 2015

Jan. 1, 2015

Even though 3.0.4.1 only has a few changes, it's nice to have an RC and make sure that everything is all right, so: http://www.dillo.org/download/dillo-3.0.4.1-rc1.tar.bz2

10 68

[cedric@reproducible.io: Thanks for your work on a browser that really cares about users' privacy!]
by jcid＠dillo.org Dec. 31, 2014

Dec. 31, 2014

FYI, -- Cheers Jorge.-

1 0

--local and redirection
by eocene＠gmx.com Dec. 21, 2014

Dec. 21, 2014

I notice that redirection defeats --local. You go to www.dillo.org and images aren't loaded. You go to dillo.org, it redirects to www.dillo.org, and images are loaded.

3 9