- Dillo-dev - lists.mailman3.com

patch: binding to add bookmark
by corvid＠dillo.org Sept. 20, 2013

Sept. 20, 2013

Another simple one from the bug tracker. I don't use bookmarks heavily enough to have much need for this, but I can see that it could be convenient.

2 1

patch: show_ui_tooltip
by corvid＠dillo.org Sept. 13, 2013

Sept. 13, 2013

Someone in the bug tracker was asking about turning off the ui's tooltips.

5 4

hypenator.cc errors
by csoren＠isd.net Sept. 6, 2013

Sept. 6, 2013

> On Mo, Sep 02, 2013, Chris Sorenson wrote: > > Greets all, > > > > Another sequence of bads that cropped up using the > > Silicon Graphics MIPSpro compiler, any thoughts? To wit: > > > > cc-1028 CC: ERROR File = hyphenator.cc, Line = 147 > > The expression used must have a constant value. > > > > char chars [l + 1]; > > ^ > > [more similar cases] > > It seems that your compiler does not support arrays with > variable length, which are standard since C99, as far as I > see. It could be fixed by replacing this line (as an > example) by: > > char *chars = new char [l + 1]; > > and later > > delete[] chars; > > However, I'd like to check other possibilities. A short > search lead me to > <http://www.sgi.com/products/software/irix/tools/c.html>, > according to which newer versions support C99. Which > version do you use? > I'm using MIPSpro 7.4.3 (the most current version is 7.4.4) but in C99 mode it can't compile C++ code. Not to worry I'll #ifdef my way around the variable length arrays, I guess I didn't look closely enough to realize that was what those were, thanks!

3 4

Fwd: Re: hypenator.cc errors
by csoren＠isd.net Sept. 6, 2013

Sept. 6, 2013

> > Cris: If you run ./autogen.sh && ./configure, you should > see a line: Can't seem to apply the patch: chris at starhunter:~/src/dls/dillo-3.0.3$ patch < var_len_arr_cxx.diff (Stripping trailing CRs from patch.) patching file configure.ac Hunk #1 succeeded at 105 with fuzz 2. Hunk #2 succeeded at 406 (offset -26 lines). (Stripping trailing CRs from patch.) can't find file to patch at input line 38 Perhaps you should have used the -p or --strip option? The text leading up to this was: -------------------------- |diff -r 808c0a0fc122 dw/hyphenator.cc |--- a/dw/hyphenator.cc Mon Sep 02 11:31:37 2013 -0400 |+++ b/dw/hyphenator.cc Wed Sep 04 11:15:02 2013 +0200 -------------------------- Do I need to have a mercurial checked out version to use this patch?

2 1

hypenator.cc errors
by csoren＠isd.net Sept. 5, 2013

Sept. 5, 2013

Trying it again with `patch -p1` I get: (Stripping trailing CRs from patch.) patching file configure.ac Hunk #1 succeeded at 105 with fuzz 2. Hunk #2 succeeded at 406 (offset -26 lines). (Stripping trailing CRs from patch.) patching file dw/hyphenator.cc Hunk #1 FAILED at 49. Hunk #2 FAILED at 118. 2 out of 5 hunks FAILED -- saving rejects to file dw/hyphenator.cc.rej (Stripping trailing CRs from patch.) patching file lout/misc.hh

1 0

Proposed Patch for Zombies Left by Dpi_start_dpid() in dpi.c
by jgaffney＠lawrenceville.org Sept. 2, 2013

Sept. 2, 2013

It seems that the dpid children forked by Dpi_start_dpid() in dpi.c are not reaped when they terminate themselves after a period of inactivity while the parent dillo process is still running. The patch below is simply to reap these zombies. The SIGCHLD handler should probably do more, but I am not yet familiar enough with Dillo to know what. I believe this patch adheres to the Dillo rules of coding style, but am new to the list and a novice at Dillo patching. And hence also apologies to Jorge for this duplication of a previous communication by private email (although with one small change to get the patch to compile under OpenBSD as well as Linux). ######## BEGIN PATCH ######## --- a/src/IO/dpi.c 2013-01-27 12:26:38.000000000 -0500 +++ b/src/IO/dpi.c 2013-08-27 14:58:07.995235867 -0400 @@ -33,6 +33,8 @@ #include <netinet/tcp.h> #include <arpa/inet.h> #include <netdb.h> +#include <sys/wait.h> +#include <signal.h> #include "../msg.h" #include "../klist.h" @@ -331,16 +333,33 @@ } } +static void Sigchld_handler (int signum) { + int status; + waitpid (-1, &status, WNOHANG); + } + /* * Start dpid. * Return: 0 starting now, 1 Error. */ static int Dpi_start_dpid(void) { + static int install_sigchld_handler_flag = TRUE; pid_t pid; int st_pipe[2], ret = 1; char *answer; + if ( install_sigchld_handler_flag ) { + /* Install SIGCHLD handler. */ + struct sigaction sa; + sa.sa_handler = Sigchld_handler; + sigemptyset(&sa.sa_mask); + sa.sa_flags = SA_RESTART | SA_NOCLDSTOP; + if (sigaction(SIGCHLD, &sa, 0)) + MSG ("Unable to install SIGCHLD handler.\n"); + install_sigchld_handler_flag = FALSE; + } + /* create a pipe to track our child's status */ if (pipe(st_pipe)) return 1; ######## END PATCH ########

4 7

hypenator.cc errors
by csoren＠isd.net Sept. 2, 2013

Sept. 2, 2013

Greets all, Another sequence of bads that cropped up using the Silicon Graphics MIPSpro compiler, any thoughts? To wit: cc-1028 CC: ERROR File = hyphenator.cc, Line = 147 The expression used must have a constant value. char chars [l + 1]; ^ cc-1028 CC: ERROR File = hyphenator.cc, Line = 185 The expression used must have a constant value. char noHyphens[len - 2 * breaks->size() + 1]; ^ cc-1028 CC: ERROR File = hyphenator.cc, Line = 185 The expression used must have a constant value. char noHyphens[len - 2 * breaks->size() + 1]; ^ cc-1060 CC: ERROR File = hyphenator.cc, Line = 185 The indicated operator is not allowed in an integral constant expression. char noHyphens[len - 2 * breaks->size() + 1]; ^ cc-1059 CC: ERROR File = hyphenator.cc, Line = 185 A function call is not allowed in a constant expression. char noHyphens[len - 2 * breaks->size() + 1]; ^ cc-1028 CC: ERROR File = hyphenator.cc, Line = 316 The expression used must have a constant value. char work[strlen (wordLc) + 3]; ^ cc-1059 CC: ERROR File = hyphenator.cc, Line = 316 A function call is not allowed in a constant expression. char work[strlen (wordLc) + 3]; ^ cc-1028 CC: ERROR File = hyphenator.cc, Line = 316 The expression used must have a constant value. char work[strlen (wordLc) + 3]; ^ 8 errors detected in the compilation of "hyphenator.cc". make: *** [hyphenator.o] Error 2

2 1

compilation error in fltkflatview.cc
by csoren＠isd.net Sept. 2, 2013

Sept. 2, 2013

> > > > 2 errors detected in the compilation of > > "fltkflatview.cc". ---------- > > > > I suspect it needs a 'using namespace' or somesuch here, > > thoughts? > > > > I thought this sounded a little familiar, and I was able > to find > http://lists.auriga.wearlab.de/pipermail/dillo-dev/2013-January/009809.html > that we'd been through this before. > > I think last time I was waiting to see whether anyone > reported that it didn't work for them, or that dw > originally had that for a deep reason, and then I > eventually forgot about it. This time I'll commit it, and > we'll find out. > Sorry I didn't realize this was the same question I posted about before since I assumed that that fix had been committed and back then I was working with pre-3.0 sources, anyway thanks!

1 0

compilation error in fltkflatview.cc
by csoren＠isd.net Sept. 2, 2013

Sept. 2, 2013

Greets all, As I've mentioned previously I'm trying to compile dillo-3.0.3 on Silicon Graphics using the SGI MIPSpro compiler. I'm doing this for a large group of SGI users who reside at nekochan.net. The compilation fails in line 884 in fltkflatview.cc: ---------- cc-3168 CC: ERROR File = fltkui.cc, Line = 884 A name followed by "::" must be a class or namespace name. bool FltkToggleButtonResource<I>::FltkToggleButtonResource::isActivated () ^ cc-1443 CC: ERROR File = fltkui.cc, Line = 884 "dw::fltk::ui::FltkToggleButtonResource<I>::FltkToggleButtonResource" is not a class template. bool FltkToggleButtonResource<I>::FltkToggleButtonResource::isActivated () ^ 2 errors detected in the compilation of "fltkflatview.cc". ---------- I suspect it needs a 'using namespace' or somesuch here, thoughts? Thanks a bunch!

2 1

Proposed Patch for Zombies Left by Dpi_start_dpid() in dpi.c
by jgaffney＠lawrenceville.org Aug. 31, 2013

Aug. 31, 2013

Jorge Arellano Cid <jcid at dillo.org> writes: > Hi Johannes, JG: > [...] > The attached program is a stress test for SIGCHLD. The idea is to > find a formula that works well even in such cases. IIRC both of you > have access to BSD machines so please test it there. > > The program spawns 255 children which sleep 5 seconds and > terminate generating a SIGCHLD avalanche, which should be handled > cleanly. It works OK in Debian. [...] 1) OpenBSD is very strict about compliance with standards, so that, whereas on my (and I believe most if not all) Linux systems wait.h occurs redundantly in /usr/include/ and /usr/include/sys, on OpenBSD wait.h is solely in /usr/include/sys and your code will not compile unless the `#include<wait.h>' line is removed. Then `gcc -W -Wall' compiles it without complaint. 2) OpenSBD is not so extravagant with the resources allocated to unprivileged users (max 128 processes). But spawning 64 rather than 256 children the test is passed with the expected behavior on OpenBSD 5.2 GENERIC.MP#368 amd64. The OpenBSD 5.2 ports include Dillo 2.2 and FLTK2, but I just recently compiled FLTK 1.3.2 and Dillo 3.0.3 from their unmodified source on that machine without (IIRC) any errors. If you were curious more generally to see how they are modifying the Dillo source, the OpenBSD patches for Dillo 3.0.3 (the version currently in ports for OpenBSD 5.3) may be found at http://www.openbsd.org/cgi-bin/cvsweb/ports/www/dillo/patches/

2 1

Proposed Patch for Zombies Left by Dpi_start_dpid() in dpi.c
by jgaffney＠lawrenceville.org Aug. 29, 2013

Aug. 29, 2013

Johannes Hofmann <Johannes.Hofmann at gmx.de> writes: > Hi JG, > > On Tue, Aug 27, 2013 at 03:15:14PM -0400, JG wrote: >> It seems that the dpid children forked by Dpi_start_dpid() in dpi.c >> are not reaped when they terminate themselves after a period of >> inactivity while the parent dillo process is still running. The patch >> below is simply to reap these zombies. The SIGCHLD handler should >> probably do more, but I am not yet familiar enough with Dillo to know >> what. >> >> I believe this patch adheres to the Dillo rules of coding style, but >> am new to the list and a novice at Dillo patching. And hence also >> apologies to Jorge for this duplication of a previous communication by >> private email (although with one small change to get the patch to >> compile under OpenBSD as well as Linux). > > I can reproduce the issue here by killing dpid manually. > For me the following also fixes it: > > diff -r 659dc205c377 src/dillo.cc > --- a/src/dillo.cc Wed Aug 21 11:42:38 2013 +0200 > +++ b/src/dillo.cc Wed Aug 28 19:48:10 2013 +0200 > @@ -329,6 +329,7 @@ > > // Some OSes exit dillo without this (not GNU/Linux). > signal(SIGPIPE, SIG_IGN); > + signal(SIGCHLD, SIG_IGN); > > /* Handle command line options */ > opt_argv = dNew0(char*, numOptions(Options) + 1); > > Can you please check whether it works for you too? It would have the > advantage that we have all signal related stuff in one place. > > Cheers, > Johannes Thank you: your solution is of course not only correct but far simpler and better. (Though I thought that in general sigaction() is to be preferred to signal()?)

1 0

allow_white_bg
by sgeerken＠dillo.org Aug. 21, 2013

Aug. 21, 2013

Hi! It seems that I'm getting old that I tried to set the option "allow_white_bg" to "false"; to find out that the replacement color is hardcoded! If I haven't missed something, and noone objets, I'll add a prefs variable "white_bg_replacement". BTW: is there a reason that there is still a prefs variable "bg_color", while fonts (the actual fonts, not the font classes) are now defined by CSS? Sebastian

2 3

Search from address bar
by aki.helin＠iki.fi July 23, 2013

July 23, 2013

Hi, Currently when using a window manager where focus follows mouse, making a search usually requires you to reach for the mouse. One way to avoid this would be to allow using search engine(s) directly from the address bar. Searches would have to be differentiated somehow from URLs. Dillo already has a customizable list of engines in preferences, so one natural solution would be to interpret url strings which start with the name of a search engine as searches to be performed using it, so that e.g. 'wikipedia slartibartfast', 'google foo' and 'weather oulu' do what you would expect. Below is a quick patch I've used to do this for a while, should anyone else find this feature useful. diff -r 91fdbc0feb68 src/uicmd.cc --- a/src/uicmd.cc Sun Jun 16 21:23:19 2013 +0200 +++ b/src/uicmd.cc Mon Jun 17 15:00:05 2013 +0300 @@ -70,6 +70,7 @@ */ static BrowserWindow *UIcmd_tab_new(CustTabs *tabs, UI *old_ui, int focus); static void close_tab_btn_cb (Fl_Widget *w, void *cb_data); +static char *UIcmd_make_search_str(const char *str); //---------------------------------------------------------------------------- @@ -649,6 +650,27 @@ } /* + * Return a search string of the suffix if str is prefixed by the first word of a search engine name + */ +static char *UIcmd_find_search_str(const char *str) +{ + int end = dList_length(prefs.search_urls); + int p = 0; + char *url = NULL; + while (p < end && !url) { + char *search = (char *)dList_nth_data(prefs.search_urls,p); + int len = strcspn(search, " "); + int res = strncasecmp(str, search, len); + if (res == 0 && (str[len] == 0 || str[len] == ' ')) { + prefs.search_url_idx = p; + url = UIcmd_make_search_str(str + len); + } + p++; + } + return url; +} + +/* * Open a new URL in the given browser window. * * our custom "file:" URIs are normalized here too. @@ -656,10 +678,14 @@ void a_UIcmd_open_urlstr(void *vbw, const char *urlstr) { char *new_urlstr; + char *search_urlstr = NULL; DilloUrl *url; int ch; BrowserWindow *bw = (BrowserWindow*)vbw; + if ((search_urlstr = UIcmd_find_search_str(urlstr))) { + urlstr = search_urlstr; + } if (urlstr && *urlstr) { /* Filter URL string */ new_urlstr = a_Url_string_strip_delimiters(urlstr); @@ -680,6 +706,8 @@ url = a_Url_new(new_urlstr, NULL); } dFree(new_urlstr); + if (search_urlstr) + dFree(search_urlstr); if (url) { a_UIcmd_open_url(bw, url); -- Aki Helin

6 17

line wrapping
by corvid＠lavabit.com July 2, 2013

July 2, 2013

I noticed that lines aren't wrapping for me with http://www.dillo.org/FAQ.html . hg bisect says that it started with: changeset: 2838:b2b239eb45b9 summary: Fixed problem with hyphenation.

4 8

Rendering problem?
by jcid＠dillo.org June 24, 2013

June 24, 2013

Hi there, James Gholston wrote this: As I dig around unsuccessfully for a type of information, I look at your FAQ and realize the next person might be helped by it being available there. Q: I am trying to develop a web site to be highly compatible with Dillo. Where can I find information on optimization? In my specific case I'm directing Dillo to my HTML 3.2 theme, and Dillo has the highest market share of what I'm sending to it. Complete with a <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> declaration. I have a graphical 'bookmark' in a <TD> element defined both as background="" and as a CSS1 background (nested table layout similar to what I'm using for MSIE 5.5 through 8). Neither works with my copy of Dillo 3 (I just get the solid black fallback color), so I'm assuming it's not working for any other Dillo user. If there are additional Dillo tweaks listed somewhere I didn't think to hunt for I could also try to apply them. Unless I'm testing to see what one of my nine other themes looks like in Dillo at the time, you can gawk at what I'm doing at http://test.moonsociety.org if you want to. Other browsers I'm sending to HTML 3.2 are Netscape 3 and 4, MSIE 3 through 5, and any otherwise unidentifiable browser claiming to be Mozilla 4.0. My other themes look significantly different than the HTML 3.2 theme. Thank you for your time and work on the most available small graphical browser. James Gholston -- Cheers Jorge.-

1 0

[jamesg@dimensionality.com: I have an addition to the Dillo FAQ]
by jcid＠dillo.org June 24, 2013

June 24, 2013

-- Cheers Jorge.-

1 0

Can't compile Dillo 3.0.3
by Johannes.Hofmann＠gmx.de June 24, 2013

June 24, 2013

Hi August, On Fri, May 10, 2013 at 11:33:13AM +0200, August Karlstrom wrote: > I'm trying to compile Dillo 3.0.3 but I get an error from the linker saying: > > /usr/bin/ld: xembed.o: undefined reference to symbol 'XSync' > /usr/bin/ld: note: 'XSync' is defined in DSO > /usr/lib/x86_64-linux-gnu/libX11.so.6 so try adding it to the linker > command line > > How do I add -lX11 to the linker command line? I have tried > > $ LDLIBS=-lX11 make > > but it makes no difference. My OS is Lubuntu 13.04. Could you please post the linker command line? You could try export LDFLAGS=-lX11 and then run configure;make again. Please let us know how this works. It might be that we are missing an explicit -lX11 somewhere and rely on fltkconfig --ldflags to add it - which may not be sufficient in some cases. Cheers, Johannes

7 25

Image Scaling
by sgeerken＠dillo.org June 17, 2013

June 17, 2013

Hi! I've just push some changes for a better image scaling. See these two examples for the effect: - http://www.dillo.org/~sgeerken/grid.html - http://www.dillo.org/~sgeerken/tenniel.html I'm not completely sure about the side-effects. It should be slightly slower (see comment: it can be improved), and it will not work with other that RGB and RGBA data (for the case that Imgbuf is used for other representations). The old code is still there; just look at FltkImgbuf::scaleRow. Sebastian

3 7

do not truncate long filenames beginning with dot
by dennisn＠dennisn.dyndns.org June 15, 2013

June 15, 2013

Sometimes, when trying to save a document with long filenames, the truncated default save-as filename will start with a dot. (Ie. a hidden file.) This behaviour should change. Perhaps truncate the end of the filename instead (and preserve the file extension)?

4 7

shortcuts to open links in new tab and new window
by dennisn＠dennisn.dyndns.org June 14, 2013

June 14, 2013

Currently it seems like you can only have it one way, via the "middle_click_opens_new_tab" dillorc option. (And to do it the other way, you have to right click and navigate the menus. A lengthy process :). I think it would be quite useful if both were available via a shortcut... perhaps have this option toggle the meaning of ShiftMiddleClick and MiddleClick... whereby one will open the link in a new window, and the other in a new tab?

1 0

Preventing page caching
by fusionfile＠gmail.com June 9, 2013

June 9, 2013

How do I prevent page caching in Dillo? I have tried adding <meta http-equiv="cache-control" content="no-cache" /> but it has no effect in Dillo. In Firefox it works as expected. I'm using Dillo 3.0.3. Any clues? Regards, August

2 1

dillo bug#1127
by Johannes.Hofmann＠gmx.de June 3, 2013

June 3, 2013

On Mon, Jun 03, 2013 at 02:09:46PM +0200, Urban Lundin wrote: > Dear Johannes, > > We tried your patch for the xembed structure and recompiled it, it > works fine in our main application. > Thanks a lot for solving this issue! Ok, I committed the fix. Cheers, Johannes

1 0

dillo bug#1127
by Johannes.Hofmann＠gmx.de May 20, 2013

May 20, 2013

Hi, On Mon, May 20, 2013 at 02:07:54PM +0200, Urban Lundin wrote: > Hi Johannes, > > That sounds great if you could attempt to solve this issue! > We have made a small example in TCL/TK (which you have to install > first, available through http://www.tcl.tk/) > > We did not try to embed suckless as we could not find a simple > example inside it. > > > Then the example is below. Thanks for the example. For me it works with the following patch for dillo: diff -r ace33e3969af src/xembed.cc --- a/src/xembed.cc Sun Apr 28 15:11:03 2013 +0200 +++ b/src/xembed.cc Mon May 20 19:38:06 2013 +0200 @@ -108,6 +108,7 @@ createInternal(xid); setXembedInfo(1); Fl::event_dispatch(event_handler); + Fl_Window::show(); } void Xembed::createInternal(uint32_t parent) { Before pushing it to the main repo I need to read http://standards.freedesktop.org/xembed-spec/xembed-spec-latest.html a bit more, but to me it seems a reasonable thing to do. It would be cool, if anyone using the claws mail dillo plugin could verify that the above patch doesn't break embedding in claws mail. Cheers, Johannes

1 0

Problems with DuckDuckGo
by sgeerken＠dillo.org May 18, 2013

May 18, 2013

Hi! Somehow, dillo seems to have problems with redirections from DuckDuckGo to other sites. If you search (Ctrl-S) for "foo", with standard preferences, there is no problem, while searching for "foo !i" does not work: dillo stops retrieving the URL <https://duckduckgo.com/lite/?kp=-1&q=foo+%21i>. Entering this URL in Firefox works correctly, redirecting to Google image search. Sebastian

1 0

MSG and different levels of chattiness
by corvid＠lavabit.com April 26, 2013

April 26, 2013

I was thinking this morning about how dillo can either be set to be extremely chatty or basically silent, and that maybe it would be good to have some intermediate possibilities. So here I tried adding a msg_level_min (1-4: 1 for msgs like open_url, 2 for policies like denying redirection or information like creating a file, 3 for warnings, 4 for dillo errors) : http://www.dillo.org/test/msg_levels.diff dillorc makes it sound like show_msg is mostly for debugging, whereas we use stdout a fair amount for msgs that we want a user to see... But then there's the fact that maybe no one runs anything from a cmdline anymore, in which case maybe we should also/instead be logging to a fltk window that can pop up like the window for html bugs -- or possibly a widget that can show up in the UI (although the latter might be brittle and an excessive amount of trouble).

1 0

dillo-3.0.3 release is ready for download!
by jcid＠dillo.org April 23, 2013

April 23, 2013

Hi there, The final dillo-3.0.3.tar.bz2 is ready for download [1]. :) Please notice that it has not been announced yet and the web site still needs the last touches before making it public. The idea is for you to download and compile/run test it. It's the same rc2 with the release date updated. Just that! If positive feedback comes along the way (it compoiles and runs) it may be announced tomorrow "urbi et orbi". [1] http://www.dillo.org/download/ -- Cheers Jorge.-

7 12

dillo-3.0.3 segfaults
by Johannes.Hofmann＠gmx.de April 22, 2013

April 22, 2013

Hi Jean-Pierre, it seems to be crashing within the fltk library. Did you compile fltk-1.3 yourself? If so, you could try whether tests/fonts from the fltk tarball works on your system. The output of fc-list : family | cut -d ',' -f 2 | sort would also be interesting. Regards, Johannes On Sun, Apr 21, 2013 at 10:47:16PM +0200, Jean-Pierre Demailly wrote: > Hi: > > I tried to use dillo3 on my linux/amd64 box, but did not succeed to start dillo as it segfaults immediately, even when not trying to load an html file. This occurred with dillo-3.0.2 /fltk-1.3.0, dillo-3.0.2 /fltk-1.3.2 and dillo-3.0.3 /fltk-1.3.2. Here is the output by valgrind. The problem seems to be related to loading fonts at start-up. The program does not even get to the point when it would try to open a window. > > Putting exit(0); before checkPreferredFonts(); in dillo.cc exits normally. > Putting exit(0); after checkPreferredFonts(); in dillo.cc segfaults. > > Maybe dillo absolutely wants some fonts that I don't have. Which is strange because I really have all usual truetype fonts (and many more). Hope this helps ! > > Best regards, > Jean-Pierre Demailly > ==8449== Memcheck, a memory error detector > ==8449== Copyright (C) 2002-2012, and GNU GPL'd, by Julian Seward et al. > ==8449== Using Valgrind-3.8.1 and LibVEX; rerun with -h for copyright info > ==8449== Command: dillo > ==8449== > ==8449== Conditional jump or move depends on uninitialised value(s) > ==8449== at 0x4017296: index (strchr.S:55) > ==8449== by 0x4007702: expand_dynamic_string_token (dl-load.c:430) > ==8449== by 0x4007FDF: _dl_map_object (dl-load.c:2502) > ==8449== by 0x40018BD: map_doit (rtld.c:638) > ==8449== by 0x400E225: _dl_catch_error (dl-error.c:177) > ==8449== by 0x4000F1D: do_preload (rtld.c:827) > ==8449== by 0x4004577: dl_main (rtld.c:1731) > ==8449== by 0x40145C3: _dl_sysdep_start (dl-sysdep.c:242) > ==8449== by 0x4004DF8: _dl_start (rtld.c:343) > ==8449== by 0x40016E7: ??? (in /lib/x86_64-linux-gnu/ld-2.16.so) > ==8449== > ==8449== Conditional jump or move depends on uninitialised value(s) > ==8449== at 0x401729B: index (strchr.S:58) > ==8449== by 0x4007702: expand_dynamic_string_token (dl-load.c:430) > ==8449== by 0x4007FDF: _dl_map_object (dl-load.c:2502) > ==8449== by 0x40018BD: map_doit (rtld.c:638) > ==8449== by 0x400E225: _dl_catch_error (dl-error.c:177) > ==8449== by 0x4000F1D: do_preload (rtld.c:827) > ==8449== by 0x4004577: dl_main (rtld.c:1731) > ==8449== by 0x40145C3: _dl_sysdep_start (dl-sysdep.c:242) > ==8449== by 0x4004DF8: _dl_start (rtld.c:343) > ==8449== by 0x40016E7: ??? (in /lib/x86_64-linux-gnu/ld-2.16.so) > ==8449== > paths: Cannot open file '/home/demailly/.dillo/dillorc': No such file or directory > paths: Using /usr/etc/dillo/dillorc > prefs: Color 'bfdabf' not recognized. > paths: Cannot open file '/home/demailly/.dillo/keysrc': No such file or directory > paths: Using /usr/etc/dillo/keysrc > paths: Cannot open file '/home/demailly/.dillo/domainrc': No such file or directory > paths: Using /usr/etc/dillo/domainrc > Domain: Default accept. > dillo_dns_init: Here we go! (threaded) > Disabling cookies. > ==8449== Invalid read of size 1 > ==8449== at 0x53392A4: Fl::set_fonts(char const*) (in /usr/lib/x86_64-linux-gnu/libfltk.so.1.3) > ==8449== by 0x455070: dw::fltk::FltkFont::initSystemFonts() (fltkplatform.cc:153) > ==8449== by 0x455351: dw::fltk::FltkFont::fontExists(char const*) (fltkplatform.cc:188) > ==8449== by 0x40ADA0: checkFont(char const*, char const*) (dillo.cc:227) > ==8449== by 0x409F2C: main (dillo.cc:233) > ==8449== Address 0x0 is not stack'd, malloc'd or (recently) free'd > ==8449== > ==8449== > ==8449== Process terminating with default action of signal 11 (SIGSEGV) > ==8449== Access not within mapped region at address 0x0 > ==8449== at 0x53392A4: Fl::set_fonts(char const*) (in /usr/lib/x86_64-linux-gnu/libfltk.so.1.3) > ==8449== by 0x455070: dw::fltk::FltkFont::initSystemFonts() (fltkplatform.cc:153) > ==8449== by 0x455351: dw::fltk::FltkFont::fontExists(char const*) (fltkplatform.cc:188) > ==8449== by 0x40ADA0: checkFont(char const*, char const*) (dillo.cc:227) > ==8449== by 0x409F2C: main (dillo.cc:233) > ==8449== If you believe this happened as a result of a stack > ==8449== overflow in your program's main thread (unlikely but > ==8449== possible), you can try to increase the size of the > ==8449== main thread stack using the --main-stacksize= flag. > ==8449== The main thread stack size used in this run was 8388608. > ==8449== > ==8449== HEAP SUMMARY: > ==8449== in use at exit: 898,434 bytes in 3,729 blocks > ==8449== total heap usage: 22,900 allocs, 19,171 frees, 4,128,838 bytes allocated > ==8449== > ==8449== LEAK SUMMARY: > ==8449== definitely lost: 9,256 bytes in 19 blocks > ==8449== indirectly lost: 23,164 bytes in 483 blocks > ==8449== possibly lost: 0 bytes in 0 blocks > ==8449== still reachable: 866,014 bytes in 3,227 blocks > ==8449== suppressed: 0 bytes in 0 blocks > ==8449== Rerun with --leak-check=full to see details of leaked memory > ==8449== > ==8449== For counts of detected and suppressed errors, rerun with: -v > ==8449== Use --track-origins=yes to see where uninitialised values come from > ==8449== ERROR SUMMARY: 3 errors from 3 contexts (suppressed: 1 from 1)

1 0

Crash occurring in Dillo v3.0.3
by Zero3K＠myopera.com April 11, 2013

April 11, 2013

It crashes when I press up in a drop down box when its list isn't showing.

4 7

dillo-3.0.3-rc1 available
by Johannes.Hofmann＠gmx.de April 10, 2013

April 10, 2013

Hi all, finally there is a first release candidate for the upcoming 3.0.3 release available: http://www.dillo.org/download/dillo-3.0.3-rc1.tar.bz2 Please give it a try on as many platforms as possible. It would be cool if package maintainers could also give their feedback. Cheers, Johannes

5 7

Open New Tab next to Current Ta
by Zero3K＠myopera.com April 6, 2013

April 6, 2013

How do I have Dillo do that? If its not able to be done yet, please add an optin in its config file to allow that to be done.

1 1

How do I report/find out info about crashes?
by Zero3K＠myopera.com April 5, 2013

April 5, 2013

*subject*

1 0

release preperations
by jcid＠dillo.org April 5, 2013

April 5, 2013

Hi, On Fri, Mar 29, 2013 at 09:44:25PM +0100, Johannes Hofmann wrote: > On Thu, Mar 28, 2013 at 10:11:43AM -0300, Jorge Arellano Cid wrote: > > On Thu, Mar 28, 2013 at 02:02:52PM +0100, Johannes Hofmann wrote: > > > Hi, > > > > > > I won't be available next week. I think we could release 3.0.3 now. > > > So I would propose we work together to get it out today or tomorrow. > > > Alternatively you do it without me next week, or we wait unil I'm > > > back. > > > > > > What do you think? > > > > > > Johannes > > > > > > PS: Jorge, would you be available to sign the final tarball? > > > > Yes, I'm here with lots of other things to do, but I can > > sign, or perhaps better, finish the process next week. > > Thanks. It would be cool, if you and corvid could finish it. Just reviewed the tarball and uploaded a small informational patch to the repo. (plese check). AFAICS the only pending thing is a mention of the new domainrc filtering feature and to make sure "make install" or the packager puts it in the right place. @corvid: please check domainrc and add a small comment in the "release overview" section of the splash page. It looks more or less cooked now. The remaining things are mainly in the web site. -- Cheers Jorge.-

2 2

Force Dillo to stay open
by Zero3K＠myopera.com April 2, 2013

April 2, 2013

How do I have Dillo make a blank tab instead of closing when the last tab is closed?

1 0

So, what about my suggestions?
by Zero3K＠myopera.com April 1, 2013

April 1, 2013

Will any of them be implemented anytime soon? If so, which ones?

1 0

Animated GIF support
by Zero3K＠myopera.com March 30, 2013

March 30, 2013

It would be nice for it to have support for them added.

1 0

Flickering is occurring when doing certain things
by Zero3K＠myopera.com March 30, 2013

March 30, 2013

1. It occurs when having one tab already open with a site in it, opening another site in a new tab, and going back to the previous tab. 2. It occurs on certain pages when scrolling through them. One such page is a page containing screenshots of a Pokemon Episode which can be found by going to http://www.serebii.net/anime/pictures/bestwishes/780ps3.shtml.

1 1

Start Dillo maximized
by Zero3K＠myopera.com March 30, 2013

March 30, 2013

How do I do that?

3 4

Suggestion regarding its Bookmarks plugin
by Zero3K＠myopera.com March 30, 2013

March 30, 2013

It should have the ability to open all of the bookmarks of a section (either a link or button named "Open All"). That or the ability to open them via a keyword that's assigned to a section.

1 1

Request for the adding of a Keyboard Shortcut
by Zero3K＠myopera.com March 24, 2013

March 24, 2013

There should be a keyboard shortcut to refresh the page by pressing F5 added to it.

2 2

Foreign pages don't display properly
by Zero3K＠myopera.com March 24, 2013

March 24, 2013

All of the Japanese, etc. is replaced with squares.

2 1

Dialog for adding a bookmark
by Zero3K＠myopera.com March 23, 2013

March 23, 2013

A dialog for adding a bookmark should be added that allows to change the name of it and the section its being put in (or create a new one to have it be put in).

1 0

Reporting broken sites
by Zero3K＠myopera.com March 23, 2013

March 23, 2013

I think that an option to do so should be added to it.

1 0

Dialog box for Cookie management
by Zero3K＠myopera.com March 23, 2013

March 23, 2013

It would be nice if one that allowed the allowing/disallowing of domains was added.

1 0

Ad Blocker
by Zero3K＠myopera.com March 23, 2013

March 23, 2013

It would be nice if one that supports using ABP lists was added to Dillo.

2 2

Javascript Support
by Zero3K＠myopera.com March 23, 2013

March 23, 2013

How much longer till it is available in Dillo?

2 2

Dillo is missing three functions found in all other browsers
by Zero3K＠myopera.com March 23, 2013

March 23, 2013

1. The ability to copy selected text. 2. The ability to paste text copied from it/another program. 3. The ability to select all text in the page/address bar.

2 3

upcoming 3.0.3 release
by Johannes.Hofmann＠gmx.de March 14, 2013

March 14, 2013

Hi, yesterday I made some changes to the README, ChangeLog, and splash screen in preparation for the upcoming 3.0.3 release. Please have a look at the texts and check for spelling errors or features I missed. I would like to make a first release candidate soon. Cheers, Johannes

1 0

release preperations
by Johannes.Hofmann＠gmx.de March 8, 2013

March 8, 2013

Hi, On Sat, Mar 02, 2013 at 07:57:26PM +0100, Sebastian Geerken wrote: > On Sat, Mar 02, Johannes Hofmann wrote: > > > I've pushed a new script, which uses the text versions (and adds the > > > licence information as comments). Should it download directly from > > > CTAN? From mirrors.dotsrc.org? Ask for a mirror? > > > > If mirrors.dotsrc.org works, that's probabely nicer - though I doubt > > we create any significant load. > > Mirrors.dotsrc.org works; I've changed the script. (Look at the > beginning.) > > > > As for the way to inform the user, see attached patch, which will let > > > "make install" (and friends) print a message. Comments? > > > > Nice, but most users will get precompiled packages from their > > distributions. > > > > > How is the other work on the release going on? What is still missing? > > > > I started a couple of times to add some lines to the man page that > > explain how to get and install the pattern files, but never came up > > with anything good. Should we copy the lines from your patch below? > > How many people compiling dillo from the tarball are actually reading > README and the man page? At least the man page get's installed with most binary packages. I tried to include some info about the pattern files and how they can be downloaded - please give it a review. Also we would need to install the install-hyphenation script, so that it becomes part of binary packages. If we do that it would have to be renamed to dillo-install-hyphenation or something like that. Does this sound ok? Cheers, Johannes PS: For me the documentation issue for hyphenation patterns is the only thing left before we could make a release candidate, or am I missing something?

2 5

Missing dillo.1.in
by onepoint＠starurchin.org March 8, 2013

March 8, 2013

Did someone forget to add a file? (Build log attached.) Regards, Jeremy Henty

2 3

https related crash
by Johannes.Hofmann＠gmx.de March 5, 2013

March 5, 2013

Hi, from time to time I get the crash below. Would a simple NULL check in a_Chain_check() be the correct fix? Cheers, Johannes nated with signal 11, Segmentation fault. #0 0x0805d359 in a_Chain_check (FuncStr=0x81135b3 "a_Capi_ccc", Op=2, Branch=1, Dir=2, Info=0x0) at chain.c:192 192 if (Info->Flags & (CCC_Ended + CCC_Aborted)) { (gdb) p Info $1 = (ChainLink *) 0x0 (gdb) bt #0 0x0805d359 in a_Chain_check (FuncStr=0x81135b3 "a_Capi_ccc", Op=2, Branch=1, Dir=2, Info=0x0) at chain.c:192 #1 0x08062f03 in a_Capi_ccc (Op=2, Branch=1, Dir=2, Info=0x0, Data1=0x28c83670, Data2=0x0) at capi.c:622 #2 0x0806372f in a_Capi_dpi_send_data (url=0x0, bw=0x2871da20, data=0x29563748 "<cmd='answer' to_cmd='dialog' msg='1' '>", data_sz=40, server=0x2940ee70 "proto.https", flags=<optimized out>) at capi.c:576 #3 0x0806381a in a_Capi_dpi_send_cmd (url=0x0, bw=0x2871da20, cmd=0x29563748 "<cmd='answer' to_cmd='dialog' msg='1' '>", server=0x2940ee70 "proto.https", flags=0) at capi.c:593 #4 0x08085bed in Dpiapi_dialog_answer_cb (answer=<optimized out>, bw=<optimized out>) at dpiapi.c:43 #5 a_Dpiapi_dialog (bw=0x2871da20, server=0x2940ee70 "proto.https", dpip_tag=0x286612d0 "<cmd='dialog' title='Dillo HTTPS: Missing issuer certificate!' msg='Unable to get local issuer certificate. The issuer certificate of an untrusted certificate cannot be found.' alt1='Continue' alt2='C"...) at dpiapi.c:74 #6 0x0805d21f in a_Chain_fcb (Op=684209776, Info=0x2878cec0, Data1=0x286612d0, Data2=0x29ecb9d0) at chain.c:114 #7 0x0808b533 in Dpi_parse_token (conn=<optimized out>) at dpi.c:228 #8 Dpi_process_dbuf (conn=<optimized out>, Data1=<optimized out>, Op=<optimized out>) at dpi.c:326 #9 a_Dpi_ccc (Op=2, Branch=2, Dir=1, Info=0x2878cec0, Data1=0x29e55470, Data2=0x0) at dpi.c:713 #10 0x0805d21f in a_Chain_fcb (Op=684209776, Info=0x28788fc0, Data1=0x29e55470, Data2=0x0) at chain.c:114 #11 0x0808ba6e in a_IO_ccc (Op=2, Branch=2, Dir=1, Info=0x28788fc0, Data1=0x292f6d40, Data2=0x0) at IO.c:425 #12 0x0808bc80 in IO_read (io=0x292f6d40) at IO.c:194 #13 0x0808bd88 in IO_callback (io=0x0) at IO.c:259 #14 0x0808be47 in IO_fd_read_cb (fd=6, data=0x6d7) at IO.c:280 #15 0x080e7d15 in fl_wait(double) () #16 0x080c36fc in Fl::wait(double) () #17 0x080c377b in Fl::run() () #18 0x0804e1f1 in main (argc=1, argv=0xbfbff8c4) at dillo.cc:502 (gdb)

2 3