May 2004 - Dillo-dev - lists.mailman3.com

Re: [Dillo-dev]dillo-0.8.1.tar.bz2 final on ps2
by Jorge Arellano Cid 14 May '04

14 May '04

On Fri, 14 May 2004, robert w hall wrote: > works OK on playstation2-linux with a 2.2.21 kernel (from xrhino). > I haven't tried it on the default (sony) 2.2.1 kernel (kids seem to have > deleted it!) - but dimly recollect pthreads is a library not a kernel > feature, (so it shouldn't matter???) POSIX threads is one of "those" complex matters. It depends on several things including the kernel and glibc. To add flavour, Linux comes/came with linux threads, which is close to POSIX but not fully. The New POSIX Threads Library (NPTL) is POSIX compatible, and requires special kernel threading (as of 2.5.36), glibc 2.3 and other bindings (RedHat 9 was going to be the first to provide such environment). Furthermore, there are several different threading libraries among the platforms we support, so go figure! You can read much more than you wanted to know here: http://lwn.net/Articles/10465/ http://people.redhat.com/drepper/nptl-design.pdf As you may have begun to suspect after this short exposition, it's hard to know, and certainly I don't know, whether it will also run with Sony's 2.2.1 kernel! :-) Regards Jorge.-

1 0

[Dillo-dev]pre release
by Frank W McCormick 14 May '04

14 May '04

Hi all Compiled and running the pre on Linux 2.4.24. No problems yet, but one thing that's been bothering me since Dillo was given DL capabilities....right clicking on a direct link gives you the DL but were it not for the eth0 indicator in ICEWM I wouldn't have any indication that DL was going ahead. Is this normal ? -- -------------- Frank McCormick Montreal --------------

2 1

[Dillo-dev]Re: null byte in HTML
by Jorge Arellano Cid 13 May '04

13 May '04

---------- Forwarded message ---------- Date: Thu, 13 May 2004 12:33:13 +0300 (EEST) From: Jukka K. Korpela <jkorpela(a)cs.tut.fi> To: Jorge Arellano Cid <jcid(a)dillo.org> Subject: Re: Is the null byte allowed in HTML? On Wed, 12 May 2004, Jorge Arellano Cid wrote: > I can't yet found whether the null byte character is allowed in > HTML. Can you shed some light on this? It is not. You could use http://validator.w3.org to check for disallowed characters (it reports "non SGML character number 0"), but the ultimate reference is a) for HTML 4, the SGML declaration http://www.w3.org/TR/html4/sgml/sgmldecl.html where UNUSED effectively means 'disallowed' b) for XHTML, the XML specification, see http://www.w3.org/TR/REC-xml/#charsets which say, among other things, that all characters below 9 (HT) are disallowed. Thanks for a good question - I'm just finalizing a book on XHTML (in Finnish, sorry) and I realized that I had forgotten to discuss the character issue in sufficient detail. (I just realized that various generators may produce data with control characters.) -- Jukka "Yucca" Korpela, http://www.cs.tut.fi/~jkorpela/

2 1

[Dillo-dev]null byte in HTML
by Jorge Arellano Cid 12 May '04

12 May '04

Hi there! Does anyone know whether a null-byte ('\0') is allowed inside HTML or SGML or XML? Cheers Jorge.-

1 0

[Dillo-dev]download problem on OpenBSD
by Riccardo Mottola 11 May '04

11 May '04

Hello, using pre2 I went to sourceforge do download a file. On the mirror page I selected one and clicked on the "here" message for the non-stadard refresh which gives a direct link to the file (I could use it for d/l with wget). Clicking on it brought up a file location requester, I selected my home directory and gave ok. Dillo crashed with: Nav_open_url: Url=>http://prdownloads.sourceforge.net/ayttm/ayttm-0.4.6.tar.gz?use_mirror=hean…< Connecting to 66.35.250.217 Nav_open_url: Url=>http://heanet.dl.sourceforge.net/sourceforge/ayttm/ayttm-0.4.6.tar.gz< Dns_server [0]: heanet.dl.sourceforge.net is 0x721cb8 Connecting to 193.1.219.87 HTTP warning: Unhandled MIME type: <application/x-gzip> dpi.c:71: a_Dpi_rd_dpi_socket_dir: fopen : No such file or directory - /home/multix/.dillo/dpi_socket_dir debug_msg - init_sockdir: The dpi_socket_dir file does not exist dpid started Riccardo

2 2

Re: [Dillo-dev]dillo interface and motif, athena etc
by Riccardo Mottola 11 May '04

11 May '04

david feldman wrote: > > I think your questions are very good, I hope you get good answer! > unfortunately there was no follow up. I wonder if anyone else beside you was interested. -R

2 1

[Dillo-dev]BUG#522
by Jorge Arellano Cid 10 May '04

10 May '04

Hi, Can anyone reproduce BUG#522? 522 Impact: soft error At: run time Type: crash Comments: Url=>http://www.rti-zone.org/dillo/Html.testsuite/jorge/c2.html< Gdk-ERROR **: BadValue (integer parameter out of range for operation) serial 4689 error_code 2 request_code 45 minor_code 0 HTReproduce: debian unstable WorkedBy: nobody Cheers Jorge.-

2 1

Re: [Dillo-dev]BUG#522
by Jorge Arellano Cid 10 May '04

10 May '04

On Mon, 10 May 2004, Riccardo Mottola wrote: > Jorge Arellano Cid wrote: > > > > Hi, > > > > Can anyone reproduce BUG#522? > > [...] > > No I cannot reproduce it on solaris. > > I compiled dillo on Solaris, UltraSparc too (alyazs solaris 2.6, gcc > 3.3) You might add this to the compatibility list too. So we have: Solaris 2.6, gcc 3.3, Sparc v8 processor (=32bit) Solaris 2.6, gcc 3.3, UltraSparc (64bit?) What SunOS do they report? Cheers Jorge.-

1 0

[Dillo-dev]dillo-0.8.1-pre2.tar.bz2
by Jorge Arellano Cid 10 May '04

10 May '04

Hi there! It took a long time, but finally, dillo-0.8.1-pre2.tar.bz2 is ready for download. The problem was that the patch for the problem of left-clicking an unhandled MIME type involved changes, inside the cache module, that were not trivial. I pondered the situation carefully trying to decide whether to make the patch and delay the next release, or leave it for 0.8.2. After studying the situation and developing a patch, important changes were made in the cache (for instance all the cached URLs use new code now, and the main scheduler was also changed, and the posibility of deleting an active URL-transfer was made possible). After all that, it only remained to offer a download dialog for the aborted transfer, and as the patch was already major, I went ahead and the result was one of those improvements you can't leave out. What does it do? well, now you can left-click on any URL; if it happens to be of an unhandled MIME type, the transfer is aborted, and a download dialog appears to offer the possibility of saving the resource locally. Simple and clean. Now you can click carelessly on those fake-download links from SF until you reach the real source ;). The tradeoff: the possibility of labelling this release as "beta stable" is not as clear as before. This tarball requires plenty of testing, so please download it and give it a hard time! Any use of the browser serves, specially testing the new download feature and multiple windows at the same time. Get it from: http://www.dillo.org/download/dillo-0.8.1-pre2.tar.bz2 and report back to dillo-dev. Cheers Jorge.- PS: Kudos are also welcome! ;)

3 6

[Dillo-dev]compile problems on AIX + gcc
by Riccardo Mottola 07 May '04

07 May '04

Hello, I'm trying to compile 0.8.1-pre1 on AIX 4.1 : One never knows, maybe som4e progress was made :) I had still to use CFLAGS="-lpthreads" to have configure pthread working at configure. I notice the following warnings gcc -DHAVE_CONFIG_H -I. -I. -I.. -DDILLORC_SYS='"/usr/local/etc/dillorc"' -I/u sr/local/include -I/usr/local/include/gtk-1.2 -I/usr/local/include/glib-1.2 -I/u sr/local/lib/glib/include -lpthreads -D_REENTRANT -D_THREAD_SAFE -Wall -Waggreg ate-return -c `test -f 'dw_bullet.c' || echo './'`dw_bullet.c gcc: -lpthreads: linker input file unused since linking not done should I have used LDFLAGS or something else? isn't there a more elegant solution to work around this pthread regnition problem? like a configure option? Cheers, Riccardo

1 0