February 2003 - Dillo-dev - lists.mailman3.com

re: ipv6 and dns threads
by Damien Couderc Feb. 22, 2003

Feb. 22, 2003

Last fix about dns threads will be available in less than 2 hours on the given URL. Damien

1 0

Re: [Dillo-dev] bug tracking engine
by Joe Crayne Feb. 22, 2003

Feb. 22, 2003

On Sun, Feb 16, 2003 at 10:45:49PM +0100, Sebastian Geerken wrote: > > I've been thinking about it (and hacking on dw_page.c) and > > have a partial implementation. It involved adding a pointer > > line->last_float_line which points to the last line that has > > a floater hanging down in the margin of the current line. > > Dw_page_draw_line() traces that pointer and draws that line > > too (and hence also its last_float_line and so on). > > Dw_page_draw_line (which is called by Dw_page_draw, the > implementation of DwWidget::draw) just does the actual drawing > (putting the pixels on the screen), and since you cannot > predict that it is called for all lines (normally it will be > called for those lines seen in the viewport), it should not > change the state of a DwPage. It doesn't. Dw_page_draw_line() traces the pointer and causes possibly other lines to be drawn other than the one it is called for. > - Floats may exceed the allocation of the DwPage, so they may not be > a child widget, instead, an interaction between two DwPage's is > necessary. When does a float exceed the allocation of the DwPage? Is there a new DwPage for new paragarphs? > - Since a float may be defined at a point, where there is > already a float at the respective side, you do not only need > one pointer, but rather a list or a tree, depending on how the > second float is positioned (below or left/right, both is > allowed by the CSS2 spec, but from what I've thought about it, > I believe that the second variant is simpler to implement). How about this: Floats are drawn in sequence just as other words on the line. Nothing special, except that now, line->ascent and line->descent doesnt count floats. Consequently, if the portion of the screen being refreshed doesn't yeild the DwPageLine where the float occurs, then that float wont get properly refreshed. The pointer points to the lowest (highest index) line containing a float that hangs down low enough that it may need to be refreshed also. (Note that if there's another float, then it will be either on the same line or refered back to by the pointer for the float line so that all the floats in the margin get refreshed.) Thanks.

2 1

if dillo is embeddable, what would it take to embed it in itself so that dillo can do frames?
by John L.Utz III Feb. 22, 2003

Feb. 22, 2003

Now, i happen to hate frames, and prefer to do the 'fake frames in tables' thang (which other people hate :-) ) , but their are a lot of misguided webdevs out there who have chosen to implement their site with frames, and i actually need to get information from them every now and then. For instance, going to this one in dillo is a pathetic folly :-) : http://www5.metrokc.gov/webmaps/parcelviewer/Viewer/KingCounty/viewer.asp so if dillo can be embedded in sylpheed, why cant dillo be embedded in dillo? tnx! johnu

2 1

Changing font_factor dynamically
by Gregor Hoffleit Feb. 21, 2003

Feb. 21, 2003

[Please pardon me if this is the wrong forum for such feature requests.] I'm using dillo with familiar on my iPAQ. One thing I'm regularly missing is a possibility to change the font_factor setting dynamically: For the iPAQ's small display (240x320 minus a few decorations), a single font_factor just can't fit for all different pages: For some pages, I'm glad with font_factor=0.5, with others, font_factor=0.6 is readable. I guess it's a major effort to implement a dynamical switch of the font_factor (e.g. using a pull-down menu), but I would be glad if you could discuss this feature request. Thanks for your efforts, Gregor Hoffleit

1 0

-l switch not working if <base href="..."> is given
by Melvin Hadasht Feb. 21, 2003

Feb. 21, 2003

Hi, The -l switch is meant to disallow retrieving external resources. This works fine unless the html file contains a <base href="something"> tag: in that case, the external resources are retrieved. To check this, I made a test case with an excerpt of the google search page. The attached html files just display the google logo in a table. These two attached html files differ in that "index.html" has the <base> tag commented out, making it non functional, whereas in "index-base.html" it is taken into account. To test this bug, save both html files in a directory. Then create there a subdirectory called ./images where you save the logo.gif. (This is meant for index.html where the missing <base> defaults it to the current directory. In that case, dillo index.html will show the logo, as expected). Then run dillo with the -l switch on the two files: dillo -l index.html index-base.html. The index-base.html will show the logo retrieved from http://www.google.com/intl/en/. The expected behaviour is to not retrieve it. I'll try to look into this bug this weekend, but I'm not so familiar with dillo's internals, so do not expect a miracle. I nearly forgot, this is the released dillo 0.7.0. Cheers. -- Melvin Hadasht

1 1

gtk2 patches for 0.7.0?
by Philip Blundell Feb. 20, 2003

Feb. 20, 2003

Hi, Has anybody made patches for the 0.7 release to work with GTK 2? Thanks! p.

1 0

Activating bookmarks menu crashes Dillo 0.7 ?
by Philip Ganchev Feb. 20, 2003

Feb. 20, 2003

Hi, Am I doing something wrong, or is this a bug? Following the instructions in dillo-0.7.0/INSTALL, I configure, compile, install and run Dillo, then click on the Bookmarks menu. Dillo crashes. ------------ % ./configure --target=$HOME % make % make install<No error messages.> % src/dillo Setting locale to C... dillo_dns_init: Here we go! The cookies file has a file lock: disabling cookies in this dillo! Nav_open_url: Url=>about:splash< IO_write: Changing io->Buf (4096) IO_write: EAGAIN IO_write: Changing io->Buf (4096) IO_write: EAGAIN <Dillo running> Click on the Bookmarks menu Nav_open_url: Url=>dpi:/bm/< Server NOT running waitpid: No child processes <waited 256 cycles for server to be on line> [connect]: No such file or directory Not implemented Gdk-ERROR **: X connection to :0.0 broken (explicit kill or server shutdown).--------------- I'm running Red Hat Linux on Intel Pentium II. Thanks, Philip __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/

2 1

Is this the right mailng list?
by William Trenker Feb. 20, 2003

Feb. 20, 2003

I notice I am getting messages from this list (dillo-dev(a)lists.auriga.wearlab.de) and from dillo-dev(a)auriga.wearlab.de. Which list should I use for general questions about Dillo? By the way, Dillo 0.7.0 is great! It's a perfect companion for browsing html-mail with my email client, Sylpheed. Regards, Bill

2 1

[PATCH] The patches I sent yesterday
by Patrice Mandin Feb. 19, 2003

Feb. 19, 2003

Sorry, forget about the gtk-related patch, it does not work the way it is written. -- Patrice Mandin WWW: http://membres.lycos.fr/pmandin/ Programmeur Linux, Atari Spécialité: Développement, jeux

1 0

I don't really get this...
by slymer＠slymer.org Feb. 19, 2003

Feb. 19, 2003

============================================================ if [ -d /home/silviu/etc ]; then \ /usr/bin/install -c -m 644 -b ./dillorc /home/silviu/etc/; \ elif [ -d /etc/ ]; then \ /usr/bin/install -c -m 644 -b ./dillorc /etc/; \ fi /usr/bin/install: cannot create regular file `/etc/dillorc': Permission denied ============================================================ Here's why I don't really get this part. If dillo is compiled like this: ./configure --prefix=$HOME make && make install-strip upon installation, the install script will try to see it $HOME/etc dir exists. Why this ? Dillo may look in /etc/dillorc if there was no .dillo/dillorc file in $HOME, but since $HOME/.dillo/ exists it is only logical that the script should try to install the rc file in $HOME/.dillo and not $HOME/etc Therefore I suggest that the script should look for $HOME/.dillo not $HOME/etc and it would not be a bad ideea if the dir is missing for the install script to create it... Just my 2 euro cents :} -- Registered Linux user #298569 First law of debate: Never argue with a fool. People might not know the difference.

2 1