- Dillo-dev - lists.mailman3.com

Offtopic: big miners rescue
by vic＠smartqsys.com Oct. 19, 2010

Oct. 19, 2010

Indeed! Hi there, A few days have passed since the big miners rescue finished as a complete success. Locally, we chileans, followed the events since the beginning, and specially moved since a small paper note emerged to earth level saying they were all alive. These days I've realized the press coverage was humongous. It's said that a thousand million saw a part of the rescue around the world. It's one of those few moments a lifetime gifts our souls with, where events, so powerful an real as these, make us look inwards and see the real value of things, instead of the things we usually entertain ourselves in. -- Cheers Jorge.- ------------------------------ _______________________________________________ Dillo-dev mailing list Dillo-dev(a)dillo.org http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev End of Dillo-dev Digest, Vol 62, Issue 14 *****************************************

1 0

Offtopic: big miners rescue
by jcid＠dillo.org Oct. 17, 2010

Oct. 17, 2010

Hi there, A few days have passed since the big miners rescue finished as a complete success. Locally, we chileans, followed the events since the beginning, and specially moved since a small paper note emerged to earth level saying they were all alive. These days I've realized the press coverage was humongous. It's said that a thousand million saw a part of the rescue around the world. It's one of those few moments a lifetime gifts our souls with, where events, so powerful an real as these, make us look inwards and see the real value of things, instead of the things we usually entertain ourselves in. -- Cheers Jorge.-

1 0

[bug]: CSS sets insanely huge vertical extent
by onepoint＠starurchin.org Oct. 17, 2010

Oct. 17, 2010

This small bit of HTML (attached) renders with an enormous vertical extent in Dillo - I have to hold down the mouse in the lower half of the scrollbar for several seconds before the slider moves even one pixel! Strangely, if you take out the "<span>"s then the vertical extent is *much* smaller, although still far too large. What's going on? Regards, Jeremy Henty

2 5

Dillo config in LTIB
by vic＠smartqsys.com Oct. 16, 2010

Oct. 16, 2010

Hi, For now I can live without WLAN access. Now that I have Dillo up, I click on a button on a page and have this form handler issue. Is this a configuration issue or a feature not supported by Dillo? Thanks, Vic [root@nxp /]# Nav_open_url: new url='http://192.168.1.5:88/LoginForm?Ctr_No=1' Dns_server [0]: 192.168.1.5 is 192.168.1.5 Connecting to 192.168.1.5 Unable to convert from character encoding: 'ISO-8859-1' >>> a_Nav_repush <<<< Nav_open_url: new url='http://192.168.1.5:88/LoginForm?Ctr_No=1' a_Nav_expect_done: repush! Html_tag_open_link(): addCssUrl http://192.168.1.5:88/styles/all.css Html_tag_open_link(): addCssUrl http://192.168.1.5:88/styles/Accounts.Css NumPendingStyleSheets=1 NumPendingStyleSheets=2 HTTP warning: unhandled MIME type: "image/png" >>> a_Nav_repush <<<< Nav_open_url: new url='http://192.168.1.5:88/LoginForm?Ctr_No=1' a_Nav_expect_done: repush! Html_tag_open_link(): addCssUrl http://192.168.1.5:88/styles/all.css Html_tag_open_link(): addCssUrl http://192.168.1.5:88/styles/Accounts.Css bad font: variable HTTP warning: unhandled MIME type: "image/png" DilloHtmlForm::eventHandler DilloHtmlForm::eventHandler ----- Original Message ----- From: "Vic" <vic(a)smartqsys.com> To: <dillo-dev(a)dillo.org> Sent: Wednesday, October 13, 2010 5:00 PM Subject: Re: [Dillo-dev] Dillo config in LTIB > Hi Jorge, > > The EA lpc3250 is connected to a gateway router with IP 192.168.1.4. > pinging > local LAN hosts is fine but WLAN host are unreachable. I tried editing > etc/resolv.conf with nameserver 192.168.1.4 , but this time after dillo is > up instead and not before launching dillo. It is able to > resolve but this is what I get... > > [root@nxp /]# ping www.dillo.org -c 4 > PING www.dillo.org (134.102.206.165): 56 data bytes > ping: sendto: Network is unreachable > [root@nxp /]# > > Nav_open_url: new url='http://www.dillo.org' > Dns_server [0]: www.dillo.org is 134.102.206.165 > Connecting to 134.102.206.165 > Http_connect_socket ERROR: Network is unreachable > > Thanks, > Vic > > >> >> Message: 1 >> Date: Tue, 12 Oct 2010 09:20:50 -0300 >> From: Jorge Arellano Cid <jcid(a)dillo.org> >> Subject: Re: [Dillo-dev] Dillo config in LTIB >> To: dillo-dev(a)dillo.org >> Message-ID: <20101012122050.GB2862(a)dillo.org> >> Content-Type: text/plain; charset=us-ascii >> >> Hi, >> >> On Mon, Oct 11, 2010 at 08:12:09PM -0700, Vic wrote: >>> Hi, >>> >>> I installed Dillo in LTIB and while the splash page went up, >>> clicking links reported a dns error. I checked out dillorc and >>> saw no setting related to dns. >> >> Dillo uses getaddrinfo(). It depends on the OS. >> >>> Trying a link to localhost also >>> gave I/O errors. >> >> This is strange... >> >>> My trace as follows: >>> >>> Nav_open_url: new url='http://www.dillo.org/' >>> DNS error: TRY_AGAIN >>> Dns_server [0]: www.dillo.org is (nil) >> >> Does "ping www.dillo.org" resolve? >> >> >>> Using localhost: >>> >>> Nav_open_url: new url='http://localhost:88' >>> Dns_server [0]: localhost is 127.0.0.1 >>> Connecting to 127.0.0.1 >>> ** WARNING **: IO_write, closing with pending data not sent >>> ** WARNING **: "GET / HTTP/1.1\x0D >>> Connection: close\x0D >>> Accept-Charset: utf-8,*;q=0.8\x0D >>> Accept-Encoding: gzip\x0D >>> Host: localhost:88\x0D >>> Referer: http://localhost:88/\x0D >>> User-Agent: Dillo/2.1\x0D >>> \x0D >>> " >>> >>> Thanks for any help. >> >> It looks like something external closed the connection. >> Firewall? >> >> -- >> Cheers >> Jorge.- >> >> >> >

1 0

Polygon::isPointWithin()
by corvid＠lavabit.com Oct. 15, 2010

Oct. 15, 2010

Why isn't this working? It seems like a perfectly ordinary shape... <html> <body> <img src="doesnt_matter.gif" width="250" height="700" usemap="#themap"> <map name="themap"> <area shape="poly" coords="1,250, 245,270, 223,513" href="http://www.dillo.org"> </map> </body> </html> Dillo doesn't realize it when the cursor is inside the left part of the polygon. I was hoping that this vector product stuff was Johannes code, but I see it goes back to the initial revision of the dw2 tree, so who knows where Sebastian might have gotten the algorithm from...

2 2

Pending tasks
by jcid＠dillo.org Oct. 15, 2010

Oct. 15, 2010

Hi, With regard to: > 1 provide a dillo css compatibility table (and keep it up to date) > 2 optimizing line-breaks - i.e. break at '-' but don't > break e.g. <b>D</b>illo (after the 'D'). > 3 support for  > 4 support for text-indent > 5 support font-variant > 6 support more vertical-align options > 7 make thickness of lines for underline and line-through > depending on the font size and weight > 8 support more border-style options (dotted, dashed ...) > 9 support border-collapse (table related) 5 and 7 are in testing phase (in the repo). AFAIK, 2,3,4,6,8 and 9 are open, with some work done for 6 by corvid. After the big table rendering work long ago, I'm studying the tables code again. Please notice that the doxygen dw documentation on table algorithms (the math formulas part) is not up-to-date. It's done in a different way since the big patch. My idea is to refresh my memory on this part of the code, and then to try to devise a way to implement 8 and 9. At the same time, working on this part will help for 6. Most probably we'll have to try to tackle these complex problems coordinating our effort/knowledge. I'll be in better shape to help with this after working for a while on tables. @Johannes, @corvid, please state what are your plans for work on these remaining parts (if there's one already). -- Cheers Jorge.-

2 7

Re: Dillo config in LTIB
by vic＠smartqsys.com Oct. 14, 2010

Oct. 14, 2010

Hi Johannes, Right, after editing etc/resolv.conf and setting nameserver ip after dillo is launched, it can now resolve WLAN addresses but still remains unreachable. However, local LAN published web pages can now display. So I'm sure wget will work within LAN but not WLAN. It looks like a gateway ip/ routing issue at this point. Is there a gateway ip related variable much like what nameserver is for the dns ip? Btw, does dillo support printing initiated via the web page's html script? Thanks so much, Vic Message: 4 Date: Thu, 14 Oct 2010 09:13:40 +0200 From: Johannes Hofmann Subject: Re: [Dillo-dev] Re: Dillo config in LTIB To: dillo-dev(a)dillo.org Message-ID: <20101014071340.GB934(a)blob.baaderstrasse.com> Content-Type: text/plain; charset=us-ascii On Thu, Oct 14, 2010 at 12:00:47AM +0800, vic wrote: > Hi Jorge, > > Thanks for the prompt reply. I'm using ltib Linux kernel 2.6.34 on an Embedded Artists LPC3250 development board, no firewall. The board is connected to a gateway router. > > Does "ping www.dillo.org" resolve? > It does not, it responds with "unreachable destination". However, a ping to a host in the local LAN is fine and a link to a host in the local LAN has this response... > > > Nav_open_url: new url='http://192.168.1.6:88' > > Dns_server [0]: 192.168.1.6 is 192.168.1.6 > > Connecting to 192.168.1.6 > > ** WARNING **: IO_write, closing with pending data not sent > > ** WARNING **: "GET / HTTP/1.1\x0D > > I read from a thread to place "nameserver=dns ip" in /etc/resolv.conf but nothing changed. I took a look at dns.c but I can't figure out where it's getting the value of "nameserver" from or whether it's really using that module. I think it's resolving fine, so it's probabely not a DNS issue. Can you install e.g. wget and try wget http://192.168.1.6:88 Cheers, Johannes

1 0

Re: Dillo config in LTIB
by vic＠smartqsys.com Oct. 14, 2010

Oct. 14, 2010

Hi Jorge, Thanks for the prompt reply. I'm using ltib Linux kernel 2.6.34 on an Embedded Artists LPC3250 development board, no firewall. The board is connected to a gateway router. Does "ping www.dillo.org" resolve? It does not, it responds with "unreachable destination". However, a ping to a host in the local LAN is fine and a link to a host in the local LAN has this response... > Nav_open_url: new url='http://192.168.1.6:88' > Dns_server [0]: 192.168.1.6 is 192.168.1.6 > Connecting to 192.168.1.6 > ** WARNING **: IO_write, closing with pending data not sent > ** WARNING **: "GET / HTTP/1.1\x0D I read from a thread to place "nameserver=dns ip" in /etc/resolv.conf but nothing changed. I took a look at dns.c but I can't figure out where it's getting the value of "nameserver" from or whether it's really using that module. Thanks, Vic Message: 1 Date: Tue, 12 Oct 2010 09:20:50 -0300 From: Jorge Arellano Cid Subject: Re: [Dillo-dev] Dillo config in LTIB To: dillo-dev(a)dillo.org Message-ID: <20101012122050.GB2862(a)dillo.org> Content-Type: text/plain; charset=us-ascii Hi, On Mon, Oct 11, 2010 at 08:12:09PM -0700, Vic wrote: > Hi, > > I installed Dillo in LTIB and while the splash page went up, > clicking links reported a dns error. I checked out dillorc and > saw no setting related to dns. Dillo uses getaddrinfo(). It depends on the OS. > Trying a link to localhost also > gave I/O errors. This is strange... > My trace as follows: > > Nav_open_url: new url='http://www.dillo.org/' > DNS error: TRY_AGAIN > Dns_server [0]: www.dillo.org is (nil) Does "ping www.dillo.org" resolve? > Using localhost: > > Nav_open_url: new url='http://localhost:88' > Dns_server [0]: localhost is 127.0.0.1 > Connecting to 127.0.0.1 > ** WARNING **: IO_write, closing with pending data not sent > ** WARNING **: "GET / HTTP/1.1\x0D > Connection: close\x0D > Accept-Charset: utf-8,*;q=0.8\x0D > Accept-Encoding: gzip\x0D > Host: localhost:88\x0D > Referer: http://localhost:88/\x0D > User-Agent: Dillo/2.1\x0D > \x0D > " > > Thanks for any help. It looks like something external closed the connection. Firewall? -- Cheers Jorge.-

2 1

Dillo config in LTIB
by vic＠smartqsys.com Oct. 14, 2010

Oct. 14, 2010

Hi Jorge, The EA lpc3250 is connected to a gateway router with IP 192.168.1.4. pinging local LAN hosts is fine but WLAN host are unreachable. I tried editing etc/resolv.conf with nameserver 192.168.1.4 , but this time after dillo is up instead and not before launching dillo. It is able to resolve but this is what I get... [root@nxp /]# ping www.dillo.org -c 4 PING www.dillo.org (134.102.206.165): 56 data bytes ping: sendto: Network is unreachable [root@nxp /]# Nav_open_url: new url='http://www.dillo.org' Dns_server [0]: www.dillo.org is 134.102.206.165 Connecting to 134.102.206.165 Http_connect_socket ERROR: Network is unreachable Thanks, Vic > > Message: 1 > Date: Tue, 12 Oct 2010 09:20:50 -0300 > From: Jorge Arellano Cid <jcid(a)dillo.org> > Subject: Re: [Dillo-dev] Dillo config in LTIB > To: dillo-dev(a)dillo.org > Message-ID: <20101012122050.GB2862(a)dillo.org> > Content-Type: text/plain; charset=us-ascii > > Hi, > > On Mon, Oct 11, 2010 at 08:12:09PM -0700, Vic wrote: >> Hi, >> >> I installed Dillo in LTIB and while the splash page went up, >> clicking links reported a dns error. I checked out dillorc and >> saw no setting related to dns. > > Dillo uses getaddrinfo(). It depends on the OS. > >> Trying a link to localhost also >> gave I/O errors. > > This is strange... > >> My trace as follows: >> >> Nav_open_url: new url='http://www.dillo.org/' >> DNS error: TRY_AGAIN >> Dns_server [0]: www.dillo.org is (nil) > > Does "ping www.dillo.org" resolve? > > >> Using localhost: >> >> Nav_open_url: new url='http://localhost:88' >> Dns_server [0]: localhost is 127.0.0.1 >> Connecting to 127.0.0.1 >> ** WARNING **: IO_write, closing with pending data not sent >> ** WARNING **: "GET / HTTP/1.1\x0D >> Connection: close\x0D >> Accept-Charset: utf-8,*;q=0.8\x0D >> Accept-Encoding: gzip\x0D >> Host: localhost:88\x0D >> Referer: http://localhost:88/\x0D >> User-Agent: Dillo/2.1\x0D >> \x0D >> " >> >> Thanks for any help. > > It looks like something external closed the connection. > Firewall? > > -- > Cheers > Jorge.- > > >

1 0

Dillo config in LTIB
by vic＠smartqsys.com Oct. 12, 2010

Oct. 12, 2010

Hi, I installed Dillo in LTIB and while the splash page went up, clicking links reported a dns error. I checked out dillorc and saw no setting related to dns. Trying a link to localhost also gave I/O errors. My trace as follows: Nav_open_url: new url='http://www.dillo.org/' DNS error: TRY_AGAIN Dns_server [0]: www.dillo.org is (nil) Using localhost: Nav_open_url: new url='http://localhost:88' Dns_server [0]: localhost is 127.0.0.1 Connecting to 127.0.0.1 ** WARNING **: IO_write, closing with pending data not sent ** WARNING **: "GET / HTTP/1.1\x0D Connection: close\x0D Accept-Charset: utf-8,*;q=0.8\x0D Accept-Encoding: gzip\x0D Host: localhost:88\x0D Referer: http://localhost:88/\x0D User-Agent: Dillo/2.1\x0D \x0D " Thanks for any help. Vic

2 1