December 2011 - Dillo-dev - lists.mailman3.com

Horizontal scrolling with mouse buttons
by jcid＠dillo.org Aug. 7, 2012

Aug. 7, 2012

On Mon, Aug 15, 2011 at 02:18:33PM -0400, saulgoode(a)flashingtwelve.brickfilms.com wrote: > Quoting Jorge Arellano Cid <jcid(a)dillo.org>: > > > Please try dillo-3.0-pre, following these directions [1]. > >Then report back how it goes. > > > > [1] http://www.dillo.org/source.html > > With that build, the horizontal scroll buttons are inactive. To my > mind this is satisfactory behavior as it does not interfere with the > vertical scrolling of the mouse wheel (previously the only way to > restore vertical wheel scrolling was to restart the program). Good! This looks like an issue with fltk-1.3. FWIW, inside fltk-1.3 src/Fl_x.cxx:1443, there's no code to handle those buttons. Having something like the following may be worth a try (if you're a coder): if (xevent.xbutton.button == Button4) { Fl::e_dy = -1; // Up event = FL_MOUSEWHEEL; } else if (xevent.xbutton.button == Button5) { Fl::e_dy = +1; // Down event = FL_MOUSEWHEEL; + } else if (xevent.xbutton.button == Button6) { + Fl::e_dx = -1; // Left + event = FL_MOUSEWHEEL; + } else if (xevent.xbutton.button == Button7) { + Fl::e_dx = +1; // Right + event = FL_MOUSEWHEEL; } else { Fl::e_state |= (FL_BUTTON1 << (xevent.xbutton.button-1)); event = FL_PUSH; checkdouble(); } > Thank you for your response. :) -- Cheers Jorge.-

3 2

Wikipedia pages
by mailbox＠georgpotthast.de Dec. 26, 2011

Dec. 26, 2011

I hope there are still plans to get Dillo to display Wikipedia pages properly. The NetSurf browser, as I found, has no problems with those: http://www.netsurf-browser.org/about/screenshots/images/gtk-wikipedia.png I thought that the rendering engines of Dillo and NetSurf would be comparable and not that much different. Georg

2 1

keysrc and prefix keys
by onepoint＠starurchin.org Dec. 16, 2011

Dec. 16, 2011

I was thinking of implementing more of Firefox's key shortcuts in Dillo, namely Alt-<n> -> "Go to nth tab" for <n> = 1, 2, 3, ... 8 and Alt-9 -> "Go to last tab". (That last one would be really useful when I have more tabs open than will fit in the tab bar.) But then I thought "how do we configure this in keysrc?". The obvious solution is to add separate entries for each of the 9 commands. But this is clearly silly because no-one wants to use, say, Alt as the prefix for going to the 4th tab but Ctrl-Shift as the prefix for going to the 5th tab. Why should users have to add 9 entries to keysrc just because they prefer Ctrl-Shift to Alt? So I think we really want a single keyssrc entry that defines the modifier keys that bind the 1, 2, 3, ... 9 keys to the "Go to tab" commands. But this would significantly complicate the current code. Is it worth it? Regards, Jeremy Henty

3 5

dillo-3.0.2 released
by corvid＠lavabit.com Dec. 10, 2011

Dec. 10, 2011

It's official! http://www.dillo.org/download/dillo-3.0.2.tar.bz2 http://www.dillo.org/download/dillo-3.0.2.tar.bz2.asc And, for good measure, the sha1sum is still... 1d1258ee7d18c8ca0eabaf100f2f611c6be03f87 as it was for the rc. Thanks everyone!

2 1

Change "view page source" to use a DPI.
by mailbox＠georgpotthast.de Dec. 10, 2011

Dec. 10, 2011

When I read the "Current Plans" list I thought that the Medium priority items were worked on after the High Priority items were done and overlooked the green button. Since "View page source" works in the current version of Dillo-Win32 Johannes is right and Benjamin had already rewritten that. Considering all the work Benjamin has put into his version I cannot react with <shrugs> on his decision to discontinue. I just hope he may change his mind again. Georg

1 0

Change "view page source" to use a DPI.
by mailbox＠georgpotthast.de Dec. 10, 2011

Dec. 10, 2011

I work on the Dillo f?r DOS version and I was shocked to read ;-) that you plan to use DPI to view the page source. This will cause the code for DOS not to work anymore. Can you please save yourself the time to change this part of the Dillo code? Georg

3 2

cookiesrc -> DEFAULT ACCEPT works, while gmail.com ACCEPT doesn't
by rogerx.oss＠gmail.com Dec. 8, 2011

Dec. 8, 2011

The following cookiesrc file works for GMail: $HOME/.dillo/cookiesrc DEFAULT ACCEPT But this doesn't work for GMail and Google complains cookies are not enabled. $HOME/.dillo/cookiesrc DEFAULT DENY google.com ACCEPT Making this even more difficult, I found killing dpid and restart dillo was not effective, I needed to kill Xorg too to prevent loading pages from what looked like dillo was loading from cache. But after much troubleshooting for the past hour, I've determined the above scenario consistent. As soon as "DEFAULT DENY, google.com ACCEPT" is entered, Google complains cookies are not enabled every time. -- Roger http://rogerx.freeshell.org/

2 9

Dillo fails on http://www.google.com/m/. Browser Agent?
by rogerx.oss＠gmail.com Dec. 8, 2011

Dec. 8, 2011

I find Dillo failing on the following simple site, which Elinks and other mobile browsers view just fine: http://www.google.com/m/ -- Roger http://rogerx.freeshell.org/

3 3

Knoppix 3.0.2 - no go
by jcid＠dillo.org Dec. 7, 2011

Dec. 7, 2011

Hi, On Wed, Dec 07, 2011 at 02:54:03PM -0500, jmh5 at nhfn.net wrote: > > Hi Again, > > It appears I spoke too soon. 3.0.2 now works ? > Maybe dpid or some other program was reloaded? > > Also, the older version now works differently !! > > Now I am really interested in how do I make a fully static > version? So I don't have program operation changing unexpectedly? Please subscribe to dillo-dev mailing list if you're interested in following the thread. This email and the previous one were forwarded there. HTH, -- Cheers Jorge.-

1 0

[jmh5@nhfn.net: Knoppix 3.0.2 - no go]
by jcid＠dillo.org Dec. 7, 2011

Dec. 7, 2011

FYI, -- Cheers Jorge.-

1 0

No subject
by bogus＠does.not.exist.com Dec. 7, 2011

Dec. 7, 2011

cache, or as if there were a stale persistent dpi process still present. At this point, I'll gander it was something with the dpi processes not cleanly exiting due to the kill signal. (I doubt a *dpi* process was hidden from proc.) -- Roger http://rogerx.freeshell.org/

1 0

tooltip bug
by corvid＠lavabit.com Dec. 6, 2011

Dec. 6, 2011

I just noticed some odd behaviour with <img src=img title="img title" border=1 width=50 height=50><br> <a href=link title="link title">text</a> If I put the cursor over the link and then, when I expect the tooltip to pop up, move quickly up into the image, first the link's tooltip pops up for an instant -- but says "img title" -- and then the image's tooltip pops up -- but says "link title".

1 0

IPv6 and HTTPS (Re: release candidate for dillo-3.0.2)
by obeythepenguin＠gmail.com Dec. 4, 2011

Dec. 4, 2011

Johannes wrote: > I doubt it's worth making the current experimental HTTPS plugin > IPv6 ready. > We will need a more robust HTTPS solution at some point. > Cheers, > Johannes Why not just reuse the existing HTTP code? *cough* http://dillo-win32.sourceforge.net/patches/07-dfcntl.diff http://dillo-win32.sourceforge.net/patches/08-dsock.diff http://dillo-win32.sourceforge.net/patches/17-https.diff Just add some warning dialogs and you've got everything the plugin offers, plus greater efficiency, code reuse, IPv6, etc. (Not to mention, it's thoroughly tested and quite stable on Linux, BSD, that other OS with 99% market share, etc. I use it myself every day.) Anyway, all my code's still there if you're interested. Cheers, ~Benjamin

2 1

release candidate for dillo-3.0.2
by corvid＠lavabit.com Dec. 4, 2011

Dec. 4, 2011

I just put up an rc at http://www.dillo.org/download/dillo-3.0.2-rc1.tar.bz2 $ sha1sum dillo-3.0.2-rc1.tar.bz2 1d1258ee7d18c8ca0eabaf100f2f611c6be03f87 dillo-3.0.2-rc1.tar.bz2 Please test :) If all goes well, the idea is to release on Monday...

9 16

Dillo temporary directory
by obeythepenguin＠gmail.com Dec. 3, 2011

Dec. 3, 2011

Jorge wrote: > On Sat, Dec 03, 2011 at 09:11:48AM +0100, Georg Potthast wrote: > > I observe that Dillo changes the current directory to "\tmp" when > > running. Why does it do that and what files shall be written into > > this directory? > No files, Dillo tries to work from an unmounted directory. > -- Cheers > Jorge.- But *why* does Dillo work from an unmounted directory? What advantage does this provide, especially if Dillo does not write any files there? (As a side note, /tmp _is_ mounted on many systems, like OpenBSD.) Cheers, ~Benjamin

1 0

Dillo-dev Digest, Vol 76, Issue 1
by mailbox＠georgpotthast.de Dec. 3, 2011

Dec. 3, 2011

I observe that Dillo changes the current directory to "\tmp" when running. Why does it do that and what files shall be written into this directory? Georg

2 1