- SFD-discuss - lists.mailman3.com

Re: [SFD-discuss] SFD-discuss Digest, Vol 119, Issue 7

by LM

On Sat, Sep 12, 2020 at 8:27 AM Mostafa wrote: > We are just one week away from SFD! Guess we'll be celebrating a week early here. If anyone cares to join us Sunday, the virtual links are here and the times listed are for Eastern Time in the US: https://gettogether.community/events/7160/software-freedom-day-celebration/ Usually we get a small turn out. It'll be very interesting to see if doing this online affects how many people attend.

Sept. 12, 2020

Artwork page on wiki

by Mostafa Ahangarha

Hi The Artwork page on wiki says it is for 2019. it has some artwork with logos of some sponsors which I don't think it be relevant to SFD2020. Moreover I have made Persian logo for SFD which is following same design for the official logo. I don't know where to upload it and under what license. We are just one week away from SFD!

Sept. 11, 2020

Wiki needs to be updated

by Mostafa Ahangarha

Hi It seems the wiki needs some serious attention. I just mention two things: * Wiki connection is unsafe. It needs to be on https. * Wiki page for information regarding video conferencing was outdated. Some links were broken (fixed) and one proprietary solution was suggested (removed) I think specially for this year, we need to provide more suggestions regarding having online SFD. (http://wiki.softwarefreedomday.org/VideoConferencing)

Sept. 10, 2020

Re: [SFD-discuss] SFD on Social Media?

by Mostafa Ahangarha

I agree that we need and I would even say we must communicate with people in general and not only those who are already into Free Software. To me, the most important aim for SFD is to reach more and more people, and more the people who have no idea about Software Freedom. So, my request for having account on FLOSS social media like Mastodon is not to delete Twitter and Facebook accounts, but use them smartly and actively alongside Mastodon. These are my suggestions: 1. There should be some activity on current social media (facebook, twitter) to inform people about the SFD2020. 2. An account be made on Mastodon to keep connection with those who opt to only be on FLOSS social media. 3. Due to Covid-19 pandemic, many people don't have idea how to celebrate SFD. We can make a proposal and offer it as an optional approach towards conducting SFD 2020. For this, we might be able to get some support from some Jitsi / Big‌BlueButton instances for having free online sessions for those events registered on SFD website. Regards

Sept. 9, 2020

Re: [SFD-discuss] What software will you be discussing on Software Freedom Day?

by Julian H. Stacey

Maren Hachmann wrote: > Hi LM, > > our talk schedules will soon (as in this weekend) be published at > > https://kielux.de/programm > and > https://kielux.de/programm/LPD20 > > While most of the talks are in German, the software names in the talk / > workshop titles should be internationally the same. > > Cheers > Maren > > Am 03.09.20 um 20:26 schrieb LM: > > Would be very curious to hear what Free, Libre and Open Source > > Software and/or Creative Commons and other resources will you be > > discussing at Software Freedom Day? > >=20 > > I annually try to update my list of software here: > > http://www.distasis.com/cpp/pbtc.htm > > I also put together a couple of lists that might be of interest to > > educators, including this one: > > https://lmemsm.dreamwidth.org/15912.html > >=20 > > Some of the talks such as the ones mentioned by SaltaLUG on the SFD > > wiki looked really interesting. Would love to hear what software will > > get mentioned or recommended in the talks. Thanks. http://www.berklix.org/trans/ Thus https://translate.google.com/translate?hl=&sl=de&tl=en&u=https%3A%2F%2Fkiel… https://translate.google.com/translate?hl=&sl=de&tl=en&u=https%3A%2F%2Fkiel… Cheers, Julian -- Julian Stacey, Consultant Sys. Engineer, BSD Linux http://berklix.com/jhs/ Crash Brexit Dec. 2020 paid by speculators. http://berklix.uk/brexit/#money Probe Russian Brexit Referendum https://petition.parliament.uk/petitions/332293

Sept. 4, 2020

Re: [SFD-discuss] What software will you be discussing on Software Freedom Day?

by Maren Hachmann

Hi LM, our talk schedules will soon (as in this weekend) be published at https://kielux.de/programm and https://kielux.de/programm/LPD20 While most of the talks are in German, the software names in the talk / workshop titles should be internationally the same. Cheers Maren Am 03.09.20 um 20:26 schrieb LM: > Would be very curious to hear what Free, Libre and Open Source > Software and/or Creative Commons and other resources will you be > discussing at Software Freedom Day? > > I annually try to update my list of software here: > http://www.distasis.com/cpp/pbtc.htm > I also put together a couple of lists that might be of interest to > educators, including this one: > https://lmemsm.dreamwidth.org/15912.html > > Some of the talks such as the ones mentioned by SaltaLUG on the SFD > wiki looked really interesting. Would love to hear what software will > get mentioned or recommended in the talks. Thanks. > > > _______________________________________________ > SFD-discuss mailing list > SFD-discuss(a)sf-day.org > http://mail.sf-day.org/lists/listinfo/sfd-discuss >

Sept. 4, 2020

What software will you be discussing on Software Freedom Day?

by LM

Would be very curious to hear what Free, Libre and Open Source Software and/or Creative Commons and other resources will you be discussing at Software Freedom Day? I annually try to update my list of software here: http://www.distasis.com/cpp/pbtc.htm I also put together a couple of lists that might be of interest to educators, including this one: https://lmemsm.dreamwidth.org/15912.html Some of the talks such as the ones mentioned by SaltaLUG on the SFD wiki looked really interesting. Would love to hear what software will get mentioned or recommended in the talks. Thanks.

Sept. 3, 2020

Re: [SFD-discuss] FLOSS acronym a liability, distracts from free open source promotion

by Frederic Muller - DFF

On 9/2/20 6:32 AM, Julian H. Stacey wrote: > Mentioning floss just invites MS addicts in an audience to heckle > with jokes about about teeth. Funnily I have always seen the hidden LOSS in fLOSS and that has bothered me for ever. I am a Free Software advocate and seldom meet MS people though (as in MS fans). I think the term was used in SFD when I joined as something inclusive as there was a lot of bickering about Free Software vs Open Source Software at the time. But that was a long time ago. We could scout the wiki/website and replace all those FLOSS acronyms. I know Richard doesn't like open source as it missed the ideology part for him. I initially used to think Open Source was more representative of the ideology than Free Software because of the ambiguity of the word Free in English. But that was in the previous century, so it probably doesn't count, right? What does the SFD community think about it, at least the one relying on English terminology (I know Mainland China as a similar issue for different reasons though - they have a kind of conflicting relationship with the word 'freedom'...). Thank you for raising that up :-) Fred

Sept. 2, 2020

FLOSS acronym a liability, distracts from free open source promotion

by Julian H. Stacey

Each year SFD resurects the distracting half forgoten acronym FLOSS. Un-used in English & German circles here, though I'm very keen on free source software: & use that exclusively & promoted it for maybe 20 or 30 years, organised SFD's, stands at exhibitions, lectures etc). (PS Was the etymology of the acronym FLOSS to appeal to French speakers ? the `Libre' repeating the `Free'?) For the public, the acronym is a distraction to look up when they're already puzzling why we work so hard to evangelise something we give away: Free Source Software - Something for Nothing for them ! - "What's the Catch ?" is what they're trying to figure. So we toss them a contrived Acronym, & expect them to think we're not even weirder ? ;-) There are simple words such as Linux & BSD to tell people to search for. Not for https://en.wikipedia.org/wiki/Floss Mentioning floss just invites MS addicts in an audience to heckle with jokes about about teeth. The acronym is not in pages I write, eg http://www.berklix.org/free/ http://www.berklix.org/bim/ http://www.berklix.org/~jhs/ except under http://www.berklix.org/sfd/ Cheers, Julian -- Julian Stacey, Consultant Sys. Engineer, BSD Linux http://berklix.com/jhs/ Crash Brexit Dec. 2020 paid by speculators. http://berklix.uk/brexit/#money Contraception V. Global warming, pollution, wars for resources.

Sept. 1, 2020

Re: [SFD-discuss] SFD on Social Media?

by LM

Jurgen Gaeremyn wrote: > I like open social media. But if that's our only outlet to promote SFD, > we're preaching to the choir. If you want to reach people who aren't > knee deep into open source software, you need to be where they are. I agree with this. The target audience of people who could learn about and benefit from converting to FLOSS is more likely to be found on non-Free platforms. I was really shocked by how many tech and programming groups in my area do not use FLOSS and do not know about most of the FLOSS options. Many are currently promoting Microsoft Teams and Zoom to the public and explaining how to use them. They believe they are doing a public service helping those less knowledgeable about tech to use these types of tools. They also use tools like Meetup, Facebook, Slack and Discord to communicate. Lately, I've been feeling like talking to people in these groups is like talking to a wall, but it would be nice to reach some of the less technical people they're reaching and let them know there are other alternatives before they make their choices. Users who aren't set in their ways are more likely to adopt something different. > Secondly, I'm much in favor of the principle of doing: if you think it's > important, please do it. If nobody is willing to invest the time into > building up the open social media buzz around SFD, If some people are > willing to promote SFD on facebook, twitter or even linkedin... great! I also agree with this. We should hopefully have enough people involved in putting together SFD events that we can do a good job of promoting and publicizing it too. It's pretty much what I do every year. This year, I posted to every FLOSS group on Facebook that I could find and join. I posted to some of the educational groups I'm on. I posted to every FLOSS group I'm on and some of the local tech groups on LinkedIn. There is a SFD group on LinkedIn and I posted a reminder about SFD there. I also posted to Edmodo. I'm also trying to reach the CSTA (contacted three different groups in the CSTA) to try to get them to mention it to their members, but so far, they've just ignored me. Last year, I posted on Meetup on every local group I thought might be interested and on Slack for the local tech groups that ran a Slack channel and I told them at the various tech meetings in person. Had a turn-out of 4 last year, but we still had a great time. We still have some time before SFD, so I'll probably be posting to other groups as well. I'd really like to reach educators this year since they're having a lot of trouble adapting to distance learning and there are some great FLOSS tools that can help with that. I like the concept of https://gettogether.community/ If anyone wants to join and add a post there, I think it will help promote the site. If they have enough activities there, they might actually be able to give Meetup some competition. I talked to one of the local tech groups and their publicizer basically said he only sent members information about meetings from Meetup. So, if sites like https://gettogether.community/ were more popular and people were made aware of them, the general public might start using them more. I typically post a link to the SFD web page and occasionally share the wiki link as well. If people are interested, they can find out what's going on in their area or what's convenient for them to attend.

Sept. 1, 2020