- Dillo-dev - lists.mailman3.com

Re: [Dillo-dev] FLTK2-based GUI dpi for downloads

by Jorge Arellano Cid

On Mon, Jan 02, 2006 at 09:45:46PM +0100, Johannes Hofmann wrote: > On Mon, Jan 02, 2006 at 05:32:24PM -0300, Jorge Arellano Cid wrote: > > > > > - For some reason, downloads.dpi got built from downloads.c until I > > > manually compiled downloads.cc. > > > > After patching, autoconf/automake files are modified so a: > > > > make distclean > > ./autogen > > ./configure > > make > > > > cycle is required (otherwise dependencies may linger). > > Had done that... Perhaps it's a problem with my aclocal/automake > installation... Well the updated HOWTO is: 1.- Get the latest CVS (it has dpi/downloads.cc) 2.- Get http://www.dillo.org/test/dl_GUI.diff cd dillo; patch -p1 < dl_GUI.diff 3.- cd dillo/dpi; mv downloads.c downloads.c.old; rm -r .deps 4.- Go to http://www.fltk.org/software.php and get the "fltk-2.0.x-r4721.tar.bz2" tarball (or SVN at your option). __you need FLTK 2.0.x, FLTK 1.1.x won't work___ 5.- Install FLTK2 6.- Build Dillo, install & enjoy! -- Cheers Jorge.-

Jan. 2, 2006

Re: [Dillo-dev] FLTK2-based GUI dpi for downloads

by Glyn Kennington

Thomas-Martin Seck wrote: > - I needed to move dpi/downloads.c out of the way; otherwise > something(tm) always tried to build downloads.o using downloads.c > (Makefile and Makefile.in were correctly generated but > .deps/downloads.Po was wrong - could someone enlighten me what goes on > there?) Thanks for the pointer - this allowed me to get as far as: if g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -I/usr/include/glib-1.2 -I/usr/lib/glib/include -g -O2 -MT downloads.o -MD -MP -MF ".deps/downloads.Tpo" \ -c -o downloads.o `test -f 'downloads.cc' || echo './'`downloads.cc; \ then mv -f ".deps/downloads.Tpo" ".deps/downloads.Po"; \ else rm -f ".deps/downloads.Tpo"; exit 1; \ fi downloads.cc: In function 'void read_req_cb(int, void*)': downloads.cc:915: error: jump to label 'end' downloads.cc:901: error: from here downloads.cc:907: error: crosses initialization of 'DLAction action' downloads.cc:915: error: jump to label 'end' downloads.cc:897: error: from here downloads.cc:907: error: crosses initialization of 'DLAction action' downloads.cc:915: error: jump to label 'end' downloads.cc:893: error: from here downloads.cc:907: error: crosses initialization of 'DLAction action' downloads.cc:915: error: jump to label 'end' downloads.cc:889: error: from here downloads.cc:907: error: crosses initialization of 'DLAction action' downloads.cc:915: error: jump to label 'end' downloads.cc:885: error: from here downloads.cc:907: error: crosses initialization of 'DLAction action' Putting the DlAction block within its own scope solves the problem, but I'm sure it's not as simple as that. Glyn

Jan. 2, 2006

Re: [Dillo-dev] FLTK2-based GUI dpi for downloads

by Johannes Hofmann

On Mon, Jan 02, 2006 at 05:32:24PM -0300, Jorge Arellano Cid wrote: > > > > - strndup() seems not to be availably on DragonFly. Don't know about > > other BSDs. > > Ok, it's patched now in CVS (beware of the g_free instead of plain free). Works fine now. > > > - For some reason, downloads.dpi got built from downloads.c until I > > manually compiled downloads.cc. > > After patching, autoconf/automake files are modified so a: > > make distclean > ./autogen > ./configure > make > > cycle is required (otherwise dependencies may linger). Had done that... Perhaps it's a problem with my aclocal/automake installation... > > > -- > Cheers > Jorge.- > > PS: No need to CC' me. > > _______________________________________________ > Dillo-dev mailing list > Dillo-dev(a)dillo.org > http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev >

Jan. 2, 2006

Re: [Dillo-dev] FLTK2-based GUI dpi for downloads

by Thomas-Martin Seck

* Jorge Arellano Cid (jcid(a)dillo.org) > Here's a HOWTO fo the FLTK2-based GUI-dpi for downloads: > > * Get the latest CVS (it has dpi/downloads.cc) > * Get http://www.dillo.org/test/dl_GUI.diff > cd dillo; patch -p1 < dl_GUI.diff > * Go to http://www.fltk.org/software.php and get > the "fltk-2.0.x-r4721.tar.bz2" tarball (or SVN at your option). > __you need FLTK 2.0.x, FLTK 1.1.x won't work___ > * Install FLTK2 > * Build Dillo, install & enjoy! OK, tried this on FreeBSD 6 and ran into the following minor issues: - I needed to move dpi/downloads.c out of the way; otherwise something(tm) always tried to build downloads.o using downloads.c (Makefile and Makefile.in were correctly generated but .deps/downloads.Po was wrong - could someone enlighten me what goes on there?) - I needed to patch dpi/downloads.cc to make it build, I hope this fix is correct: Index: downloads.cc =================================================================== RCS file: /sfhome/cvs/dillo/dillo/dpi/downloads.cc,v retrieving revision 1.1 diff -u -r1.1 downloads.cc --- downloads.cc 2 Jan 2006 14:08:45 -0000 1.1 +++ downloads.cc 2 Jan 2006 20:26:43 -0000 @@ -306,7 +306,7 @@ p = strrchr(fullname, '/'); shortname = (p) ? strdup(p + 1) : strdup("??"); p = strrchr(full_filename, '/'); - target_dir = (p) ? strndup(full_filename,p-full_filename+1) : strdup("??"); + target_dir = (p) ? g_strndup(full_filename,p-full_filename+1) : strdup("??"); log_len = 0; log_max = 0; - Did I mention I did get a nice gui after all (it is intended to get visible after the directory selection dialog has finished?) :-) > Note to packagers: Don't worry about FLTK2. The resulting dpi > binary is statically linked so there're no new dependencies for a > package that ships the new GUI-dpi for downloads, and as you'll > soon understand, this new dpi is the recommended choice! :-) > The idea is to ship this GUI-dpi when Dillo-0.8.6 is released. I have a FreeBSD port for FLTK-2-snap ready for inclusion in the FreeBSD ports tree (we build everything from source in FreeBSD ports land). So building an FLTK-2 dillo should not be a problem. Best regards and thanks for keeping up the good work on dillo -- Thomas-Martin Seck (current dillo maintainer on FreeBSD)

Jan. 2, 2006

Re: [Dillo-dev] FLTK2-based GUI dpi for downloads

by Jorge Arellano Cid

Hi Johannes, On Mon, Jan 02, 2006 at 09:15:44PM +0100, Johannes Hofmann wrote: > Hi, > > just tried it on DragonFly BSD. Now it works (nice!) Good! > just a couple > of things I noticed: > > - strndup() seems not to be availably on DragonFly. Don't know about > other BSDs. Ok, it's patched now in CVS (beware of the g_free instead of plain free). > - For some reason, downloads.dpi got built from downloads.c until I > manually compiled downloads.cc. After patching, autoconf/automake files are modified so a: make distclean ./autogen ./configure make cycle is required (otherwise dependencies may linger). -- Cheers Jorge.- PS: No need to CC' me.

Jan. 2, 2006

Re: [Dillo-dev] FLTK2-based GUI dpi for downloads

by Johannes Hofmann

Hi, just tried it on DragonFly BSD. Now it works (nice!) just a couple of things I noticed: - strndup() seems not to be availably on DragonFly. Don't know about other BSDs. - For some reason, downloads.dpi got built from downloads.c until I manually compiled downloads.cc. Thanks, Johannes On Mon, Jan 02, 2006 at 11:30:43AM -0300, Jorge Arellano Cid wrote: > Hi there, > > Let's start 2006 with a nice addition to Dillo. > > Here's a HOWTO fo the FLTK2-based GUI-dpi for downloads: > > * Get the latest CVS (it has dpi/downloads.cc) > * Get http://www.dillo.org/test/dl_GUI.diff > cd dillo; patch -p1 < dl_GUI.diff > * Go to http://www.fltk.org/software.php and get > the "fltk-2.0.x-r4721.tar.bz2" tarball (or SVN at your option). > __you need FLTK 2.0.x, FLTK 1.1.x won't work___ > * Install FLTK2 > * Build Dillo, install & enjoy! > > Note to packagers: Don't worry about FLTK2. The resulting dpi > binary is statically linked so there're no new dependencies for a > package that ships the new GUI-dpi for downloads, and as you'll > soon understand, this new dpi is the recommended choice! :-) > The idea is to ship this GUI-dpi when Dillo-0.8.6 is released. > > All: Please test it and let me know to the list you succeeded > in the installation process (just to be sure I didn't forget a > step in the above instructions). Feedback is welcomed. > > Tips: The GUI is compact, but has plenty of information. Look > at the tooltips (place the mouse cursor over the widgets wait and > see; e.g. the filename widget shows the wget log). > > BTW, I also prepared some XPM Icons for window managers. These > are in the Icons page. My Icewm looks very nice with the new > 16x16 and 32x32 pair! > > Enjoy, and have a great 2006! > > -- > Cheers > Jorge.- > > _______________________________________________ > Dillo-dev mailing list > Dillo-dev(a)dillo.org > http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev >

Jan. 2, 2006

FLTK2-based GUI dpi for downloads

by Jorge Arellano Cid

Hi there, Let's start 2006 with a nice addition to Dillo. Here's a HOWTO fo the FLTK2-based GUI-dpi for downloads: * Get the latest CVS (it has dpi/downloads.cc) * Get http://www.dillo.org/test/dl_GUI.diff cd dillo; patch -p1 < dl_GUI.diff * Go to http://www.fltk.org/software.php and get the "fltk-2.0.x-r4721.tar.bz2" tarball (or SVN at your option). __you need FLTK 2.0.x, FLTK 1.1.x won't work___ * Install FLTK2 * Build Dillo, install & enjoy! Note to packagers: Don't worry about FLTK2. The resulting dpi binary is statically linked so there're no new dependencies for a package that ships the new GUI-dpi for downloads, and as you'll soon understand, this new dpi is the recommended choice! :-) The idea is to ship this GUI-dpi when Dillo-0.8.6 is released. All: Please test it and let me know to the list you succeeded in the installation process (just to be sure I didn't forget a step in the above instructions). Feedback is welcomed. Tips: The GUI is compact, but has plenty of information. Look at the tooltips (place the mouse cursor over the widgets wait and see; e.g. the filename widget shows the wget log). BTW, I also prepared some XPM Icons for window managers. These are in the Icons page. My Icewm looks very nice with the new 16x16 and 32x32 pair! Enjoy, and have a great 2006! -- Cheers Jorge.-

Jan. 2, 2006

Re: [Dillo-dev] Font Problm with max width Forms

by Wilhelm Korrengk

Thank you for your reply! > width in ~/.dillo/dillorc on the rendering section.(vw_fontname, > fw_fontname, font_factor) playing with those parameter didn`t change anything! But you might be right with .gtkrc as far as those form-text-sizes are as big as the menu texts (File -> Exit) and URL texts... Because no .gtkrc existed i tried to build my own looking the following: -- style "user-font" { font="Helvetica 18" } widget_class "*" style "user-font" -- Which did not work... Any other ideas? Thank You so far mfG Wilhelm K.

Dec. 30, 2005

Re: [Dillo-dev] Font Problm with max width Forms

by Diego Sáenz

I have had similar problem in sarge with url entry box and interface text using old gtk config. Try to rename ~/.gtkrc to other name(if it exist) and restart the GUI and GUI apps. If it do not work rename ~/.gtkrc to the original name. You can try to select a diferent font for fixed and variable width in ~/.dillo/dillorc on the rendering section.(vw_fontname, fw_fontname, font_factor) I hope this help. Please, send more data if it do not work. Diego. El Fri, 30 Dec 2005 20:08:01 +0100 Wilhelm Korrengk <DerBadejunge(a)web.de> escribio: > Hello and Thank You! > Dillo is great. > But on my new PC the "Submit" buttons and textfields of forms are too small. > On all of my other machines it runs great (kde) but now on windowmaker it > doesnt... I run x and xfs packages from debian sarge. > > Thanks for Help! > Wilhelm Korrengk > > _______________________________________________ > Dillo-dev mailing list > Dillo-dev(a)dillo.org > http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev

Dec. 30, 2005

Font Problm with max width Forms

by Wilhelm Korrengk

Hello and Thank You! Dillo is great. But on my new PC the "Submit" buttons and textfields of forms are too small. On all of my other machines it runs great (kde) but now on windowmaker it doesnt... I run x and xfs packages from debian sarge. Thanks for Help! Wilhelm Korrengk

Dec. 30, 2005