November 2005 - Dillo-dev - lists.mailman3.com

Re: [Dillo-dev] building Dillo 0.8.5 with Compaq's C Compiler on FreeBSD/Alpha

by Jorge Arellano Cid

On Sun, Nov 06, 2005 at 10:25:02AM +0100, Anders Gavare wrote: > Hi all! Hi. > > Dillo 0.8.5 doesn't compile "out-of-the-box" with Compaq's C Compiler on > FreeBSD/Alpha. The Dillo source code seems to be quite portable and clean > as it is, so only very minor changes were necessary to make it build and > run. It's probably a very uncommon compiler scenario, but I thought I'd > still share this with the list. Perhaps it is of interest to someone. > > 1. src/dw_embed_gtk.h, line 27: > > /*gboolean child_size_request_lock*/; > > CCC doesn't like the semi-colon being outside the comment. Moving > it inside allows the compilation to continue. Done. > > 2. Lines 379-380 in src/dw_widget.h do not work with CCC. > > #define a_Dw_iterator_unhighlight(it, l) ((it) ? \ > (it)->highlight(it, -1, -1, l) : FALSE) > > highlight() seems to return a void, which is not the same type as > FALSE. I am not sure what the correct solution would be, but changing > line 380 into the following will at least allow the compilation > continue: > > ((it)->highlight(it, -1, -1, l), TRUE) : FALSE) I changed it to: ((it)->highlight(it, -1, -1, l), TRUE) : (void)0) > > 3. Line 134 in src/html.c. CCC says 'The static declaration of "Tags" is a > tentative definition and specifies an incomplete type. (incompstat)' > Removing the 'static' so that the line reads just > > const TagInfo Tags[]; > > allows the compilation to continue. (Note that the actual definition > of static const TagInfo Tags further down in html.c does _not_ need > to be changed!) ... but gcc complains with that change: html.c:4318: error: static declaration of 'Tags' follows non-static declaration html.c:134: error: previous declaration of 'Tags' was here html.c:134: warning: array 'Tags' assumed to have one element so I left it unchanged. > > So far so good. With these modifications, LIBPTHREAD_LIBS="-lc_r" CC=ccc > CFLAGS="-mcpu=pca56 -fast -O4 -g3" ./configure; make builds everything. > > However, Dillo crashes when run. I spent some time trying to track down > what causes this, and it seems to be the debug macros. CCC gives about a > million warnings about these, looking like this: > > cc: Warning: file.c, line 42: This parameter is not preceded by a > comma. (missingcomma) > #define _MSG(fmt...) > ----------------^ > > cc: Warning: file.c, line 905: Too few actual parameters in the > invocation of the macro "MSG". (toofewactuals) > MSG("file.dpi:: Failed to parse 'url'\n"); > > and so on. Apparently, either CCC is flawed in this regard, or the MSG > macros were not written cleanly enough. Modifying src/msg.h and src/debug.h > so that all MSG and DEBUG_MSG macros simply become empty statements, also > changing the BW_MSG define in src/IO/http.c into an empty definition > "avoids" the problem, Dillo seems to run fine, but of course there will be > no debug output. :-/ The "fmt..." syntax is used to specify a function with a variable number of arguments. Try to find how it's done with CCC. > > The compiler version I used was "V6.4-005 on Linux 2.4.2 alpha", and the > host OS was FreeBSD/Alpha 4.9. Perhaps some of these modifications could > apply to the current CVS tree as well, and not just 0.8.5, but I haven't > had time to check. Please try the current CVS and tell me if at least what's changed works. If you find a portable way to solve the othe problems, just let me know. -- Cheers Jorge.-

Nov. 15, 2005

Re: [Dillo-dev] minor compilation problem with current cvs

by Jorge Arellano Cid

On Sat, Oct 29, 2005 at 03:04:12PM +0200, Johannes Hofmann wrote: > The new cookie dpi has a minor compilation problem in DragonFly-BSD > and probabely other BSDs as well. > The following modifictaion solves the problem. > > Index: dpi/cookies.c > =================================================================== > RCS file: /sfhome/cvs/dillo/dillo/dpi/cookies.c,v > retrieving revision 1.3 > diff -u -r1.3 cookies.c > --- dpi/cookies.c 28 Oct 2005 14:12:32 -0000 1.3 > +++ dpi/cookies.c 29 Oct 2005 13:02:21 -0000 > @@ -35,8 +35,8 @@ > #else > > > -#include <sys/socket.h> > #include <sys/types.h> > +#include <sys/socket.h> > #include <sys/stat.h> > #include <sys/un.h> > #include <fcntl.h> Done! -- Cheers Jorge.-

Nov. 15, 2005

Re: [Dillo-dev] dillo to access yahoo mail

by Kelson Vibber

Charles Li wrote: > Hi, > I have dillo installed on cgywinX. When I try to > logon to the yahoo mail site, it errors out and > reports "can't start dpid daemon". I also see "dpid > tag is null" in the message. How do I fix this? Thanks. I believe Yahoo Mail requires SSL to log in. Dillo implements HTTPS through a plug-in -- a DPI -- and as far as I know the DPI system does not work under Cygwin. It's been a year since I tried, and I wrote up what I found here: http://www.hyperborea.org/software/dillo/cygwin.html http://lists.auriga.wearlab.de/pipermail/dillo-dev/2004-September/002201.ht… -- Kelson Vibber www.hyperborea.org

Nov. 15, 2005

Re: [Dillo-dev] Using Frames in dillo 0.8.6pre

by Diego Sáenz

I will work in a tabs DPI when i finished preferences DPI(i am working in it now, but have few time for coding). I hoppe it can be usefull. If someone have free time and want to start tabs DPI now, i can send his a patch and tabs DPI test code. Diego El Mon, 31 Oct 2005 08:19:25 +0100 hans353(a)gmail.com escribio: > Hello. > > First of all I want to thank everybody working on > dillo web browser, i really like it. > > Now my question. I remeber having tabbed browsing and > frame support within dillo 0.85 from the gentoo ebuild. > Now i'm trying 0.86pre from cvs and can't find any option > for this. Maybe i'm to blind to find it in the INSTALL > or ./configure --help. Is there any possibility to use > tabbed browsing and frame support within dillo 0.8.6pre. > > Thank you and best regards > > Hans > > _______________________________________________ > Dillo-dev mailing list > Dillo-dev(a)dillo.org > http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev

Nov. 15, 2005

building Dillo 0.8.5 with Compaq's C Compiler on FreeBSD/Alpha

by Anders Gavare

Hi all! Dillo 0.8.5 doesn't compile "out-of-the-box" with Compaq's C Compiler on FreeBSD/Alpha. The Dillo source code seems to be quite portable and clean as it is, so only very minor changes were necessary to make it build and run. It's probably a very uncommon compiler scenario, but I thought I'd still share this with the list. Perhaps it is of interest to someone. 1. src/dw_embed_gtk.h, line 27: /*gboolean child_size_request_lock*/; CCC doesn't like the semi-colon being outside the comment. Moving it inside allows the compilation to continue. 2. Lines 379-380 in src/dw_widget.h do not work with CCC. #define a_Dw_iterator_unhighlight(it, l) ((it) ? \ (it)->highlight(it, -1, -1, l) : FALSE) highlight() seems to return a void, which is not the same type as FALSE. I am not sure what the correct solution would be, but changing line 380 into the following will at least allow the compilation continue: ((it)->highlight(it, -1, -1, l), TRUE) : FALSE) 3. Line 134 in src/html.c. CCC says 'The static declaration of "Tags" is a tentative definition and specifies an incomplete type. (incompstat)' Removing the 'static' so that the line reads just const TagInfo Tags[]; allows the compilation to continue. (Note that the actual definition of static const TagInfo Tags further down in html.c does _not_ need to be changed!) So far so good. With these modifications, LIBPTHREAD_LIBS="-lc_r" CC=ccc CFLAGS="-mcpu=pca56 -fast -O4 -g3" ./configure; make builds everything. However, Dillo crashes when run. I spent some time trying to track down what causes this, and it seems to be the debug macros. CCC gives about a million warnings about these, looking like this: cc: Warning: file.c, line 42: This parameter is not preceded by a comma. (missingcomma) #define _MSG(fmt...) ----------------^ cc: Warning: file.c, line 905: Too few actual parameters in the invocation of the macro "MSG". (toofewactuals) MSG("file.dpi:: Failed to parse 'url'\n"); and so on. Apparently, either CCC is flawed in this regard, or the MSG macros were not written cleanly enough. Modifying src/msg.h and src/debug.h so that all MSG and DEBUG_MSG macros simply become empty statements, also changing the BW_MSG define in src/IO/http.c into an empty definition "avoids" the problem, Dillo seems to run fine, but of course there will be no debug output. :-/ The compiler version I used was "V6.4-005 on Linux 2.4.2 alpha", and the host OS was FreeBSD/Alpha 4.9. Perhaps some of these modifications could apply to the current CVS tree as well, and not just 0.8.5, but I haven't had time to check. Anders

Nov. 6, 2005

My personal wish lists

by Jun OKAJIMA

Hello Dillo Developers. I tried dillo and found good. Thanks for your effort. Do you need my impression? No? umm.. Anyway, my wish list from just a few hours experience are ... 1. Integrate this -> http://teki.jpn.ph/pc/software/ Especially, - Internationalization - Frame support - Referer these are necessary. 2. Animated GIF!!! this is necessary. I felt Dillo is good for KIOSK use, but without animated gif, common web business model, in short, advertising, does not work. Nothing works without a business model, right? 3. FLTK and UTF-8 support. Among the stuff already on your wishlist, this is the most desired for me. 4. It is very difficult issue that you should add javascript or not. Despite of that I know the needs for JS is incresing because of ajax, but, atm, I feel not necessary. If you need such stuff, use firefox. --- Okajima, Jun. Tokyo, Japan.

Nov. 3, 2005