December 2002 - Dillo-dev - lists.mailman3.com

bug tracking engine

by Sebastian Geerken

Hi! I took a look at the bug entries, and comment some of them. If not otherwise stated, I'm using the current CVS version of dillo. > [area.gif] 209 > Impact: soft error > At: run time > Type: misbehaviour > Comments: ALT image tag balloons sometimes stay present when the > balloon's window becomes inactive by consecutively opening several > new dillo windows with middle mouse button. These "ghosts" stay on > the top X layer until the balloon's window becomes active again. > HTReproduce: just open an url with many alt image tags and open > several new urls in new dillo windows from that page by clicking > the middle mouse buttons over some links. The urls you open should > have many alt tags, too. Repeat this procedure until you get the > effect. > WorkedBy: nobody Can this still be reproduced? Since this entry was made, there have been some changes related to tooltips (Dw crossing events, to be precise). It may be that this bug has been fixed in the meanwhile. If not, please report so. > [area.gif] 275 > Impact: hard error > At: run time > Type: lock > Comments: Dillo locks, with high CPU usage, at > http://www.adequacy.org/?op=displaystory;sid=2001/12/2/42056/2147 > HTReproduce: Go to > http://www.adequacy.org/?op=displaystory;sid=2001/12/2/42056/2147. > Watch the CPU-meter spike and Dillo stop responding. > WorkedBy: nobody This side has changed its contents, but it may be that performance problems with large tables caused this bug. It became better some time ago, but may be enhanced furthermore, however, with the costs of more complexity (with another column width calculation, "incremential resizing" may also be applied to DwTable). So I won't do much on this, unless there are severe performance/locking problems. > [area.gif] 355 > Impact: soft error > At: run time > Type: render bug > Comments: When rendering tables (in column oriented pages), right > column starts on the right and below left column. > HTReproduce: Visit http://www.howstuffworks.com/air-force-one.htm > WorkedBy: nobody This page is written by someone assuming that <TABLE ALIGN=LEFT> makes the table floating, instead to be aligned left (HTML 4.01 spec, section 11.2.1). Anyway, this is a common behavior of browsers, but since there is currently no code for handling floats, this is not relevant yet. > [area.gif] 374 > Impact: soft error > At: run time > Type: render bug > Comments: weird rendering with lots of overlapping text. While the > HTML is probably messed up, drawing several layers of text on top > of each other is pretty bad :) > HTReproduce: have a look at http://www.dse.co.nz > WorkedBy: nobody I do not see any problems with this page, nor with the only <frame>, at http://www.dse.co.nz/cgi-bin/dse.storefront. > [area.gif] 382 > Impact: hard error > At: run time > Type: crash > Comments: Dillo 6.6 crashes immediately when visting the following > URL: > http://deadly.org/article.php3?sid=20020914154658 > HTReproduce: Visting the following URL: > http://deadly.org/article.php3?sid=20020914154658 > WorkedBy: nobody I cannot reproduce it. Fixed in the meanwhile? > [area.gif] 387 > Impact: soft error > At: run time > Type: render bug > Comments: Rendering tables inside tables does not work correctly. > If the inner table has two rows set to 50% height of the outer > table�s height, the rows anyhow are pushed upwards not taking 100%. > HTReproduce: Make a html file with the setup described in the > comment and let dillo parse it. > WorkedBy: nobody Aside from that the HEIGHT attribute is not yet supported, rows with "height:50%" (in CSS terms) take 50% of the table height, only if the latter has been specified (CSS2 spec, section 10.5). > [area.gif] 389 > Impact: feature fault > At: run time > Type: render bug > Comments: europe.cnn.com fails to render properly (forntpage + > articles). > HTReproduce: enter > http://europe.cnn.com/ > as your URL > WorkedBy: nobody Does anyone see a difference? The only thing I've noticed is that some colors are different than in mozilla, I assume that this is due to mixing HTML attributes and CSS. Happy New Year! Sebastian

Dec. 31, 2002

Seen in Slashdot

by Eric Gaudet

Hi, the following link has been posted on /. today. It contains very interesting information about browsers usability. Interestingly enough, one of the proposals to improve user experience was proposed by Jorge last year (temporal history). http://www.cosc.canterbury.ac.nz/~andy/web_navigation.html Worthy readings. Best, EG --------- In theory, there's no difference between theory and practice. In practice, there is.

Dec. 30, 2002

Re: [Dillo-dev] ./configure & make errors

by Ralph Slooten

On Mon, 30 Dec 2002 10:51:10 +0100 Sebastian Geerken <s.geerken(a)ping.de> wrote: > On Mon, Dec 30, Sebastian Geerken wrote: > > On Sun, Dec 29, Eric GAUDET wrote: > > > I had the same problem with autoconf v2.13. I updated to 2.54, and > > > I don't see this problem anymore. > > > > If you have installed both versions (at least in debian, "autoconf" > > 2.53 depends on "autoconf2.13"?), call "autconf2.50" explicitely, > > before "./configure". There seems to be something wrong with, > > perhaps with the timestamps? > > The timestamp is of course the one of the checkout time, so I have: > > -rwxr-xr-x 1 sg sg 165570 Dec 30 10:46 configure > -rw-r--r-- 1 sg sg 4389 Dec 30 10:46 configure.in > > "make" will then create again "configure", but uses autoconf 2.13, > instead of 2.5x. Does someone know autoconf well enough to get it > starting a specific version? > > Sebastian Hi there Sebastian (and the rest). After realising that autoconf > 2.13 was required, I also realised that on my mandrake both are actually installed, with a script linked to /usr/bin/autoconf . The trick with this script was to export the environment needed to use the higher version, and on my mandrake the trick was to first "export WANT_AUTOCONF_2_5=1" .. then the rest. I'm not sure if this is standard on other recent distros, but after exporting this environment, configuring and compiling works great ;-) Maybe this helps ;-) Greetings Ralph -- http://tuxpower.f2g.net/ http://axljab.homelinux.org:8080/ "I have opinions of my own, strong opinions, but I don't always agree with them." -- George H. W. Bush

Dec. 30, 2002

Re: Dillo-dev -- confirmation of subscription -- request 555752

by Arnaud Le Rouzic

On Mon, 30 Dec 2002 15:58:46 +0100 dillo-dev-request(a)auriga.wearlab.de wrote: > Dillo-dev -- confirmation of subscription -- request 555752 > > We have received a request from 157.136.33.124 for subscription of > your email address, <lerouzic(a)pge.cnrs-gif.fr>, to the > dillo-dev(a)lists.auriga.wearlab.de mailing list. To confirm the > request, please send a message to > dillo-dev-request(a)lists.auriga.wearlab.de, and either: > > - maintain the subject line as is (the reply's additional "Re:" is > ok), > > - or include the following line - and only the following line - in the > message body: > > confirm 555752 > > (Simply sending a 'reply' to this message should work from most email > interfaces, since that usually leaves the subject line in the right > form.) > > If you do not wish to subscribe to this list, please simply disregard > this message. Send questions to > dillo-dev-admin(a)lists.auriga.wearlab.de.

Dec. 30, 2002

Fwd: Re: [Dillo-dev]BR taking extra space and problem with spaces in table

by Sebastian Geerken

Sorry, this should have gone to here.

Dec. 30, 2002

Re: [Dillo-dev] Re: [Dillo-dev]GTK 2

by Sebastian Geerken

On Sun, Dec 29, Philip Blundell wrote: > Back in September, Jorge Arellano Cid wrote: > > - GTK2 port was discussed a long time ago (BTW it's also listed > > in the future goals), and the plan is to incorporate it into CVS > > when the main distros start to ship GTK2. > > > > - Some time ago (maybe Pekka IIRC) assembled a GTK2 patch from > > several other efforts, and I thought it'd be good to open a CVS > > branch for it a CIPSGA, but, as you may have noticed in the front > > page of our sites, we've been trying to contact CIPSGA sysadmins > > for months with Livio!!! > > Has there been any further development on this? I think we are now at > the point mentioned, in that the main distros seem to be including GTK2 > support for GNOME 2. Yes, that was also my idea some days ago. If someone knows of an important dist which does not yet contain Gtk2, please report this. I've looked at Pekka's patch (the more recent one, with Pango support, this is interesting for M17n), which does not yet integrate in the current CVS. There are some more complicated problems with recent changes, especially with findtext and related, which examine parts of words. Unfortunately, my knowledge of Pango is currenly zero. You (and expecially Pekka) will hear from me. Sebastian

Dec. 30, 2002

Re: [Dillo-dev] ./configure & make errors

by Sebastian Geerken

On Mon, Dec 30, Sebastian Geerken wrote: > On Sun, Dec 29, Eric GAUDET wrote: > > I had the same problem with autoconf v2.13. I updated to 2.54, and I > > don't see this problem anymore. > > If you have installed both versions (at least in debian, "autoconf" > 2.53 depends on "autoconf2.13"?), call "autconf2.50" explicitely, > before "./configure". There seems to be something wrong with, perhaps > with the timestamps? The timestamp is of course the one of the checkout time, so I have: -rwxr-xr-x 1 sg sg 165570 Dec 30 10:46 configure -rw-r--r-- 1 sg sg 4389 Dec 30 10:46 configure.in "make" will then create again "configure", but uses autoconf 2.13, instead of 2.5x. Does someone know autoconf well enough to get it starting a specific version? Sebastian

Dec. 30, 2002

Re: [Dillo-dev] ./configure & make errors

by Sebastian Geerken

On Sun, Dec 29, Eric GAUDET wrote: > I had the same problem with autoconf v2.13. I updated to 2.54, and I > don't see this problem anymore. If you have installed both versions (at least in debian, "autoconf" 2.53 depends on "autoconf2.13"?), call "autconf2.50" explicitely, before "./configure". There seems to be something wrong with, perhaps with the timestamps? Sebastian

Dec. 30, 2002

RE: [Dillo-dev] ./configure & make errors

by Eric GAUDET

I had the same problem with autoconf v2.13. I updated to 2.54, and I don't see this problem anymore. -- En reponse de "[Dillo-dev] ./configure & make errors" de Ralph Slooten, le 30-Dec-2002 : > Hi there, > > Since 4 or 5 days ago, I have not been able to compile Dillo (cvs). It > yells that I am missing `Autoconf' and `GNU m4' however I do have these > both (Mandrake 9.0).Then it finally bombs out during "make" > with: > > ./configure: line 549: syntax error near unexpected token `src/dillo.c' > ./configure: line 549:`AC_CONFIG_SRCDIR(src/dillo.c)' > > Any idea what the problem could be here, and how I can fix this? Any > help would be greatly appreciated.... > > > Greetings > Ralph > > > ==================================================================== > [axllent@ws dillo]$ ./configure > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for gawk... gawk > checking whether make sets ${MAKE}... yes > checking for gcc... gcc > checking for C compiler default output... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for style of include used by make... GNU > checking dependency style of gcc... gcc3 > checking for gcc option to accept ANSI C... none needed > checking for ranlib... ranlib > checking for gtk-config... /usr/bin/gtk-config > checking for GTK - version >= 1.2.0... yes > checking for jpeg_destroy_decompress in -ljpeg... yes > checking how to run the C preprocessor... gcc -E > checking for ANSI C header files... yes > checking for sys/types.h... yes > checking for sys/stat.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for memory.h... yes > checking for strings.h... yes > checking for inttypes.h... yes > checking for stdint.h... yes > checking for unistd.h... yes > checking jpeglib.h usability... yes > checking jpeglib.h presence... yes > checking for jpeglib.h... yes > checking jconfig.h usability... yes > checking jconfig.h presence... yes > checking for jconfig.h... yes > checking jerror.h usability... yes > checking jerror.h presence... yes > checking for jerror.h... yes > checking jmorecfg.h usability... yes > checking jmorecfg.h presence... yes > checking for jmorecfg.h... yes > checking for pthread_create in -lpthread... yes > checking for zlibVersion in -lz... yes > checking for png_check_sig in -lpng... yes > checking for ANSI C header files... (cached) yes > checking fcntl.h usability... yes > checking fcntl.h presence... yes > checking for fcntl.h... yes > checking for unistd.h... (cached) yes > checking sys/uio.h usability... yes > checking sys/uio.h presence... yes > checking for sys/uio.h... yes > checking for socket... yes > configure: creating ./config.status > config.status: creating Makefile > config.status: creating doc/Makefile > config.status: creating src/Makefile > config.status: creating src/IO/Makefile > config.status: creating config.h > config.status: executing default-1 commands > > [axllent@ws dillo]$ make > cd . && \ > /bin/sh /home/axllent/dillo/missing --run automake --gnu Makefile > cd . && /bin/sh /home/axllent/dillo/missing --run autoconf > autoconf: Undefined macros: > configure.in:153:AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile > src/IO/Makefile]) configure.in:4:AC_CONFIG_SRCDIR([src/dillo.c]) > WARNING: `autoconf' is missing on your system. You should only need it > if you modified `configure.in'. You might want to install the > `Autoconf' and `GNU m4' packages. Grab them from any GNU > archive site. > /bin/sh ./config.status --recheck > running /bin/sh ./configure --no-create --no-recursion > creating cache ./config.cache > ./configure: line 549: syntax error near unexpected token `src/dillo.c' > ./configure: line 549: `AC_CONFIG_SRCDIR(src/dillo.c)' > make: *** [config.status] Error 2 > ==================================================================== > -- > http://tuxpower.f2g.net/ > http://axljab.homelinux.org:8080/ > > "I have opinions of my own, strong opinions, > but I don't always agree with them." -- George H. W. Bush > > _______________________________________________ > Dillo-dev mailing list > Dillo-dev(a)lists.auriga.wearlab.de > http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev ------------------------------------------------------------------------ Eric GAUDET <eric(a)rti-zone.org> Le 29-Dec-2002 a 22:40:52 "Parler pour ne rien dire et ne rien dire pour parler sont les deux principes majeurs et rigoureux de tous ceux qui feraient mieux de la fermer avant de l'ouvrir." ------------------------------------------------------------------------

Dec. 30, 2002

./configure & make errors

by Ralph Slooten

Hi there, Since 4 or 5 days ago, I have not been able to compile Dillo (cvs). It yells that I am missing `Autoconf' and `GNU m4' however I do have these both (Mandrake 9.0).Then it finally bombs out during "make" with: ./configure: line 549: syntax error near unexpected token `src/dillo.c' ./configure: line 549:`AC_CONFIG_SRCDIR(src/dillo.c)' Any idea what the problem could be here, and how I can fix this? Any help would be greatly appreciated.... Greetings Ralph ==================================================================== [axllent@ws dillo]$ ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets ${MAKE}... yes checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for gcc option to accept ANSI C... none needed checking for ranlib... ranlib checking for gtk-config... /usr/bin/gtk-config checking for GTK - version >= 1.2.0... yes checking for jpeg_destroy_decompress in -ljpeg... yes checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking jpeglib.h usability... yes checking jpeglib.h presence... yes checking for jpeglib.h... yes checking jconfig.h usability... yes checking jconfig.h presence... yes checking for jconfig.h... yes checking jerror.h usability... yes checking jerror.h presence... yes checking for jerror.h... yes checking jmorecfg.h usability... yes checking jmorecfg.h presence... yes checking for jmorecfg.h... yes checking for pthread_create in -lpthread... yes checking for zlibVersion in -lz... yes checking for png_check_sig in -lpng... yes checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for unistd.h... (cached) yes checking sys/uio.h usability... yes checking sys/uio.h presence... yes checking for sys/uio.h... yes checking for socket... yes configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: creating src/IO/Makefile config.status: creating config.h config.status: executing default-1 commands [axllent@ws dillo]$ make cd . && \ /bin/sh /home/axllent/dillo/missing --run automake --gnu Makefile cd . && /bin/sh /home/axllent/dillo/missing --run autoconf autoconf: Undefined macros: configure.in:153:AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile src/IO/Makefile]) configure.in:4:AC_CONFIG_SRCDIR([src/dillo.c]) WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. /bin/sh ./config.status --recheck running /bin/sh ./configure --no-create --no-recursion creating cache ./config.cache ./configure: line 549: syntax error near unexpected token `src/dillo.c' ./configure: line 549: `AC_CONFIG_SRCDIR(src/dillo.c)' make: *** [config.status] Error 2 ==================================================================== -- http://tuxpower.f2g.net/ http://axljab.homelinux.org:8080/ "I have opinions of my own, strong opinions, but I don't always agree with them." -- George H. W. Bush

Dec. 30, 2002