- Dillo-dev - lists.mailman3.com

dillorc long line word wrap

by pastebin＠gmx.com

Hi, doesn't this dillorc option make 'long text lines' wrap properly in the dillo display area? # Set this to YES to limit the word wrap width to the viewport width #limit_text_width=NO limit_text_width=YES https://hosted.ap.org/article/e5ac7de893189c11c88137fe9b81829e/shot-16-seco…

June 25, 2024

Re: 'Dillo Downloads' box cutnpaste

by Rodrigo Arias

On Sat, Jun 22, 2024 at 01:05:53PM -0600, pastebin(a)gmx.com wrote: >Hi > >any chance that the 'mouse exit from file name location' in the >'Dillo Downloads' dialog box (where 'target file tooltip' disappears) >to 'mouse exist from 'Dillo Downloads' dialog box itself? i think >this would allow cutnpaste of the information in the tooltip > >or could you tell me where the code might be for 'mouse exit from file >name location' action? The code that handles the downloads dialog is at dpi/downloads.cc but not sure how to do that. Rodrigo.

June 25, 2024

Re: HTTPS Proxy Support

by Rodrigo Arias

Hi, On Sun, Jun 23, 2024 at 11:02:54AM +1000, Kevin Koster wrote: >Or at least based on looking at Squid and Nginx, internet-wide >"reverse" proxy isage isn't documented clearly enough for me to >spot the easy way of doing it (while also manipulating the >content being retrieved). I did see a very hard way to do it with >Squid and an abandoned 3rd-party library that wouldn't even compile >for me. Yeah, probably using carl is much easier to setup. >Also I don't think that 'https_endpoint' actually needs to be set >from an environment variable, just a dillorc setting would do. I also think is good if it is only a dillorc option. I'm not sure if I like more something like: https_proxy=http://localhost:1234 # Setting this to TRUE sends HTTPS traffic unencrypted to the proxy. # Don't change unless you know what you are doing. #https_proxy_use_http=FALSE (default) https_proxy_use_http=TRUE For normal uses, setting the https proxy with https_proxy would make more sense than using http_proxy for HTTPS traffic anyway. Best, Rodrigo.

June 25, 2024

Re: Feature idea: zoom buttons

by Rodrigo Arias

Hi, On Sat, May 04, 2024 at 01:44:11PM +0200, Rodrigo Arias wrote: >>One thing I will note however, on a TKL (ten key less) keyboard, there >>is no dedicated '+' key, so zooming in doesn't work. On a US layout >>for example, the key is =/+, but pressing Ctrl-Shift-= doesn't have >>the expected result. I changed the mapping in keys.cc to Ctrl-= and it >>works for me, but would vary for other localizations. > >I choose the Ctrl + / Ctrl - as it is the default in other browsers, >but I mostly use Ctrl and the mouse wheel. I haven't been able to >figure it out how to make it work yet on Dillo, but maybe that would >help you too. I just merged support for zoom control: https://github.com/dillo-browser/dillo/pull/156 You can use both Ctrl-+ (non-US) or Ctrl-= (US) by default to zoom in. Best, Rodrigo.

June 25, 2024

Re: HTTPS Proxy Support

by Kevin Koster

Rodrigo Arias <rodarima-Re5JQEeQqe8AvxtiuMwx3w(a)public.gmane.org> wrote: > On Sat, Jun 22, 2024 at 09:43:00AM +1000, Kevin Koster wrote: >>But the proxy approach allows old versions/binaries to keep working >>too. If Dillo 3.0.5 had supported it, then the HTTPS issues from >>lacking SNI support could have been worked around by running an >>'old-style' HTTPS proxy with SNI support on localhost. > > A related term seems to be "reverse proxy": > > https://en.wikipedia.org/wiki/Reverse_proxy Yes, though in practice that tends to imply a caching proxy run by website operators, hence "reverse" because a normal proxy is run by the person accessing the content on other people's servers, but these are run by the server operators. But the mechanism is the same as my usage. Real-world "reverse proxies" just tend to be geared away from internet-wide usage to serve requests to any server, not least because HTTPS requires the proxy to have the target website's certificate. Or at least based on looking at Squid and Nginx, internet-wide "reverse" proxy isage isn't documented clearly enough for me to spot the easy way of doing it (while also manipulating the content being retrieved). I did see a very hard way to do it with Squid and an abandoned 3rd-party library that wouldn't even compile for me. > From the "Fun with Crypto Ancienne" post I understand that you want > Dillo to get a HTTP or HTTPS URL and always perform a HTTP GET towards > your proxy, as the Mosaic configuration suggests: > >> https 127.0.0.1 8765 http >> http 127.0.0.1 8765 http Yes. Which, if it helps to decode my earlier posts, is equivalent to this Wget command before they secretly changed its https_proxy behaviour: http_proxy=127.0.0.1:8765 https_proxy=127.0.0.1:8765 wget https://example.com > Other that those old browsers, I don't think you can do this with any > (relatively) modern tool. Which is annoying because I didn't need it until (relatively) recently. It looks like current Lynx is designed to use HTTPS tunneling through proxies now, based on use of the do_connect variable in WWW/Library/Implementation/HTTP.c of its source code. Though with Lynx 2.8.9rel.1 and 2.9.0dev.6 I can't actually get it to talk to anything (inc. Netcat on localhost) with http_proxy or https_proxy, even though setting each variable causes page loads to fail over the respective protocol. Not a firewall issue. > This is what Dillo is currently doing for https and http URLs: > > hop% http_proxy=http://localhost:1234 dillo http://www.google.com > hop% nc -l 1234 > GET http://www.google.com/ HTTP/1.1 > Host: www.google.com > User-Agent: Dillo/3.1.1 > Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 > Accept-Encoding: gzip, deflate > DNT: 1 > Referer: http://www.google.com/ > Connection: keep-alive > > hop% http_proxy=http://localhost:1234 dillo https://www.google.com > hop% nc -l 1234 > CONNECT www.google.com:443 HTTP/1.1 > Host: www.google.com:443 > > While for the latter you'll want: > > GET https://www.google.com/ HTTP/1.1 > Host: www.google.com > User-Agent: Dillo/3.1.1 > Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 > Accept-Encoding: gzip, deflate > DNT: 1 > Referer: https://www.google.com/ > Connection: keep-alive > > You'll need to instruct Dillo to ignore the HTTPS handling and just > treat it as an HTTP GET request to the proxy (using the HTTPS url), so > no CONNECT is used. Yes, though ideally like in Wget this behaviour wouldn't be caused by setting 'http_proxy'. You'd have a variable/setting like Wget's 'https_proxy' which only causes HTTPS connections to try and use the proxy, while HTTP connections go through directly. Then you could set 'http_proxy' as well if you wanted to use a proxy for HTTP connections too. For example (with 'https_endpoint' instead of the confusing 'https_proxy' variable/setting name I proposed earlier): http_proxy=127.0.0.1:1234 dillo http://www.google.com [ 127.0.0.1:1234 ] GET http://www.google.com/ HTTP/1.1 http_proxy=127.0.0.1:1234 dillo https://www.google.com [ 127.0.0.1:1234 ] CONNECT www.google.com:443 HTTP/1.1 https_endpoint=127.0.0.1:5678 dillo http://www.google.com [ www.google.com:80 ] GET http://www.google.com/ HTTP/1.1 https_endpoint=127.0.0.1:5678 dillo https://www.google.com [ 127.0.0.1:5678 ] GET https://www.google.com/ HTTP/1.1 http_proxy=127.0.0.1:1234 https_endpoint=127.0.0.1:5678 dillo http://www.google.com [ 127.0.0.1:1234 ] GET http://www.google.com/ HTTP/1.1 http_proxy=127.0.0.1:1234 https_endpoint=127.0.0.1:5678 dillo https://www.google.com [ 127.0.0.1:5678 ] GET https://www.google.com/ HTTP/1.1 So the behaviour of 'http_proxy' alone isn't changed. Also I don't think that 'https_endpoint' actually needs to be set from an environment variable, just a dillorc setting would do.

June 23, 2024

Re: 'Dillo Downloads' box cutnpaste

by pastebin＠gmx.com

Hi any chance that the 'mouse exit from file name location' in the 'Dillo Downloads' dialog box (where 'target file tooltip' disappears) to 'mouse exist from 'Dillo Downloads' dialog box itself? i think this would allow cutnpaste of the information in the tooltip or could you tell me where the code might be for 'mouse exit from file name location' action? On Sat, 8 Jun 2024 09:47:59 -0600 pastebin(a)gmx.com wrote: > Hi > > if i have a page of links > > i cab do a mouse-right-click on one of the url links and i get the 'link menu' and then i can click on 'save link as..' and it saves the html fine in the current directory in most cases and then there is now a 'Dillo Download' box with 'Done' on it on the screen and running the mouse over the filename causes a 'Target File: xxx' box to be displayed with all the files information displayed > > The problem is when after i run mouse over the saved file name on the 'Dillo Download' box the 'Target File: xxxx) information disappears from the screen when i attempt to cutnpaste the information there > > can this behavior be changed so that moving the mouse completely from the 'Dillo Download' box and not just the file name location removes the 'Target File: xxx' information from the screen so a cutnpaste can be performed on the information in the 'Target File: xxx' box? > _______________________________________________ > Dillo-dev mailing list -- dillo-dev(a)mailman3.com > To unsubscribe send an email to dillo-dev-leave(a)mailman3.com

June 22, 2024

Re: extra /tmp on file name line when save html

by pastebin＠gmx.com

Hi i haven't had this problem since upgrading to fltk-1.3.9 On Sat, 8 Jun 2024 21:31:32 +0200 Rodrigo Arias <rodarima(a)gmail.com> wrote: > Hi, > > On Sat, Jun 08, 2024 at 10:04:40AM -0600, pastebin(a)gmx.com wrote: > >> Which version of Dillo and FLTK do you have? Cannot reproduce with > >> Dillo 3.1.1 and FLTK 1.3.9. > >> > >> I'm thinking it may be related to file access permissions, > > > >i'm thinking it has to do with 'accidentally hitting an arrow key > >before i want to type a file name to save' but nothing is reproducable > > I reviewed the code and it doesn't seem this is likely to be on Dillo > side, as we only call fl_file_chooser() of FLTK: > > https://github.com/dillo-browser/dillo/blob/e89a2293ebb3331dca46f5edf010823… > > Please report your FLTK version, as it may be already solved on 1.3.9 > and that could explain why I don't see it. > > Rodrigo. > _______________________________________________ > Dillo-dev mailing list -- dillo-dev(a)mailman3.com > To unsubscribe send an email to dillo-dev-leave(a)mailman3.com

June 22, 2024

Re: dialog box dimensions

by pastebin＠gmx.com

Hi it turns out this has nothing to do with dillo but a [transient] entry in the fluxbox 'apps' file takes care of it https://fluxboxwiki.github.io/category/howtos/en/Editing_the_apps_file.html http://fluxbox.org/help/man-fluxbox-apps.php right clicking on the dillo 'save page as' title bar and 'remember' options sets it up > > >see attached pngs > > > >1.png 'save page as file' dialog - dialog size i want > > > >2.png 'save page as file' dialog - file already exists - dialog size i want > > > >3.png 'file exists' dialog - is the same size as 'save page as file' > >dialog - the size is to large for what i want so if i reduce the > >dimensions - the next 'save page as file' dialog i get will be to small > >(the same size as what i made the 'file exists' dialog > > >dillo saves one dimension size for the two dialog boxes > >maybe 2 separate size dimensions for 'save page as file' and 'file > >exists' dialog > > If you have a working patch I could merge it into 3.1.1. Otherwise I can > queue it among the other issues, as I would need to investigate further > how to solve it. > > I have a patch somewhere that switches to a native file picker, which > may solve one of the problems (it also remembers where you saved the > last file). But this will probably be added in 3.2.0, as I'm finishing > bug fixes for 3.1.1 (no more features for now). >

June 22, 2024

Re: HTTPS Proxy Support

by Rodrigo Arias

Hi, On Sat, Jun 22, 2024 at 09:43:00AM +1000, Kevin Koster wrote: >But the proxy approach allows old versions/binaries to keep working >too. If Dillo 3.0.5 had supported it, then the HTTPS issues from >lacking SNI support could have been worked around by running an >'old-style' HTTPS proxy with SNI support on localhost. A related term seems to be "reverse proxy": https://en.wikipedia.org/wiki/Reverse_proxy From the "Fun with Crypto Ancienne" post I understand that you want Dillo to get a HTTP or HTTPS URL and always perform a HTTP GET towards your proxy, as the Mosaic configuration suggests: > https 127.0.0.1 8765 http > http 127.0.0.1 8765 http Other that those old browsers, I don't think you can do this with any (relatively) modern tool. This is what Dillo is currently doing for https and http URLs: hop% http_proxy=http://localhost:1234 dillo http://www.google.com hop% nc -l 1234 GET http://www.google.com/ HTTP/1.1 Host: www.google.com User-Agent: Dillo/3.1.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip, deflate DNT: 1 Referer: http://www.google.com/ Connection: keep-alive hop% http_proxy=http://localhost:1234 dillo https://www.google.com hop% nc -l 1234 CONNECT www.google.com:443 HTTP/1.1 Host: www.google.com:443 While for the latter you'll want: GET https://www.google.com/ HTTP/1.1 Host: www.google.com User-Agent: Dillo/3.1.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip, deflate DNT: 1 Referer: https://www.google.com/ Connection: keep-alive You'll need to instruct Dillo to ignore the HTTPS handling and just treat it as an HTTP GET request to the proxy (using the HTTPS url), so no CONNECT is used. >Sure, or actually I'd suggest using a separate variable/option name >to set that proxy server because using "https_proxy" for both proxy >systems is what's already confused me now with Wget. Something >like "https_endpoint=[hostname]" maybe? I think I would have to see it implemented to determine what would be a good name that prevents users from accidentally misconfiguring it. Best, Rodrigo.

June 22, 2024

Re: HTTPS Proxy Support

by Kevin Koster

Rodrigo Arias <rodarima-Re5JQEeQqe8AvxtiuMwx3w(a)public.gmane.org> wrote: > On Thu, Jun 20, 2024 at 04:07:27PM +1000, Kevin Koster wrote: >>My content-modifying proxy application might be very niche, but I still >>think it would be more widely useful for people running Dillo on very >>old computers. Let me know whether it's something that might be accepted >>for Dillo even if I decide to try implementing it myself. > > Provided that those machines cannot deal with HTTPS traffic, I think is > a reasonable use case. I haven't had time to dig a bit more into this > issue to see if there is a way to make those old machines use TLS > instead Oh there is, the Crypto Ancienne TLS library is designed for this: https://github.com/classilla/cryanc I started work on supporting it for HTTPS in Dillo, and got far enough that I'm sure the library would work for it, though I didn't finish debugging my attempt. That was while Dillo 3.1 looked abandoned so I did it as a HTTPS DPI plug-in, which makes my work obsolete now. But the proxy approach allows old versions/binaries to keep working too. If Dillo 3.0.5 had supported it, then the HTTPS issues from lacking SNI support could have been worked around by running an 'old-style' HTTPS proxy with SNI support on localhost. > I won't oppose to it, but we probably want to ensure that we don't send > plain traffic to a proxy when browsing HTTPS pages by accident. We > should add an option like "allow_insecure_proxy" (false by default) or > similar, so it is harder to leak HTTPS traffic accidentally. Sure, or actually I'd suggest using a separate variable/option name to set that proxy server because using "https_proxy" for both proxy systems is what's already confused me now with Wget. Something like "https_endpoint=[hostname]" maybe?

June 21, 2024