- Dillo-dev - lists.mailman3.com

dillo won't start the bm server

by slymer＠slymer.org

I dunno what's going on, but, dillo won't start the bookmark server. Compiled with: ./configure --prefix=$HOME make make install-strip -- Registered Linux user #298569 Gravity brings me down.

Feb. 16, 2003

Interview

by Jorge Arellano Cid

Hi there! Thanks for the quick replies and corrections for the english version of the interview. Now it has been corrected and uploaded, so I hope it serves better its purpose. Well, I'm expecting for feedback on the tarball now. That's the gap between rc1 and an official release! Best Jorge.-

Feb. 15, 2003

Corrected Splash Page Patch (was Re: [Dillo-dev] Release candidate 1)

by Kelson Vibber

I just realized I missed some corrections in the patch for the splash screen. Here's the updated patch. (Yes, the dates are the same; all the changes I missed were in lines I had already changed, so I just edited the previous patch.) -- Kelson Vibber kelson(a)pobox.com http://www.hyperborea.org/ Creative Writing - Photography - The Flash

Feb. 15, 2003

Re: [Dillo-dev] Release candidate 1

by Kelson Vibber

On Friday 14 February 2003 08:13 am, Jorge Arellano Cid wrote: > If you are knowledgeable in english > grammar please read/correct it and send me the diffs. That'd be, > as always, highly appreciated. I haven't had a chance to look at the interview, but I've done the same for the splash screen itself (patch for src/IO/about.c attached) -- Kelson Vibber kelson(a)pobox.com http://www.hyperborea.org/ Creative Writing - Photography - The Flash

Feb. 15, 2003

Re: [Dillo-dev] Release candidate 1

by John Bradford

Hi, > Finally, after a lot of work, the first release candidate > tarball for dillo-0.7.0 is ready. The idea is to test this > tarball and if it has no problems, the 0.7.0 release will be made > of it (with only minor or cosmetical changes). > > Once again, I'm specially interested on non GNU/Linux platforms > testing (bacause I already tested GNU/Linux). I couldn't get 0.6.6 nor the CVS version of a couple of days ago to compile using tcc under GNU/Linux. http://fabrice.bellard.free.fr/tcc/ I can post more details if required, but tcc is easy enough to install that it's probably easier for people to experiment with it themselves. John.

Feb. 14, 2003

Release candidate 1

by Jorge Arellano Cid

Hi there! Finally, after a lot of work, the first release candidate tarball for dillo-0.7.0 is ready. The idea is to test this tarball and if it has no problems, the 0.7.0 release will be made of it (with only minor or cosmetical changes). Once again, I'm specially interested on non GNU/Linux platforms testing (bacause I already tested GNU/Linux). ------------------- Summary of changes: + Included the bookmarks server code inside the main tree (no separate tarball now, it all builds at once) + Added a workaround for nanosleep on Solaris in configure.in + Added a new icon for bookmarks and set ALT+B or ; as shortcuts. (there's also the option of hiding the icon from dillorc). + Made a new splash screen (contents and design). + Made a custom D_SUN_LEN definition to avoid inconsistencies with SUN_LEN, also switched memory clearing to sizeof and defined AF_LOCAL when not present. + Made ~/.dillorc/ have precedence over PATH when searching for plugins. + Added a SIGCHLD handler to avoid zombies when the dpi server is killed manually before dillo exits. + Bound find text to /. Now it works with CTRL+F or / + Added an icon for bookmarks. + Image tooltip now works with "title" instead of "alt". (had mistankenly switched to "text" before...) bm_srv12: + Made the convertion (import) from the old bookmarks format automatic. + Made it work when there's no bm.txt file present, and also when there's a zero sized bm.txt. + Fixed some Solaris compatibility glitches. + Fixed SUN_LEN issues. ------------------- The test emphasis should be on the new features. Please remember first to remove the bookmarks server binary from your ~/.dillo/ directory and killing the server if running, before testing. Now, a simple: ./configure make make install-strip should build and install everything right (it works here!) The plan is to make the official release this Sunday or early on Monday. Please send your feedback to this list. I'll be updating the site in the meanwhile, so please focus on the tarball. Last but not the least, the splash screen includes a link to the text version of an interview I gave to tux.cl magazine. The original is in spanish so I made a quick translation to english so everyone can read it. If you are knowledgeable in english grammar please read/correct it and send me the diffs. That'd be, as always, highly appreciated. Thanks a lot and I'll be expecting your feedback! Jorge.- PS: For those that read this far, here's the tarball: http://dillo.auriga.wearlab.de/dillo-0.7.0-rc1.tar.gz :-)

Feb. 14, 2003

Re: [Dillo-dev] Website improvement / CVS page

by Sebastian Leske

Hi, * Thorben Thuermer <r00t(a)informatik.uni-bremen.de> [2003-02-13 16:56]: > Auriga is not sourceforge. when setting up our cvs repositories, we found > that it is possible to have anoncvs WITHOUT login, and it seemed a very > good idea to use that, because the additional login step only confuses > users. a very good idea. I was confused by it initially, too. > just as the dillo homepage says, you 'Just:' > > just to show that the password was not read from there: > user@host[/tmp]$ mv ~/.cvspass ~/.cvspass_bak > > user@host[/tmp]$ cvs -z3 -d :pserver:anonymous@cvs.auriga.wearlab.de:/sfhome/cvs/dillo co dillo > cvs checkout: failed to open /home/user/.cvspass for reading: No such file or directory > cvs server: Updating dillo > U dillo/AUTHORS > U dillo/COPYING > > without login. > > are you SURE you need login for it to work? we haven't heard of any problems > with this before. Well, if I do the above, I get: $ > cvs -z3 -d :pserver:anonymous@cvs.auriga.wearlab.de:/sfhome/cvs/dillo co dillo cvs checkout: could not open /ext/number/leske/.cvspass: No such file or directory cvs [checkout aborted]: use "cvs login" to log in first $ > cvs -z3 -d :pserver:anonymous@cvs.auriga.wearlab.de:/sfhome/cvs/dillo login (Logging in to anonymous(a)cvs.auriga.wearlab.de) CVS password: $ > cvs -z3 -d :pserver:anonymous@cvs.auriga.wearlab.de:/sfhome/cvs/dillo co dillo cvs server: Updating dillo U dillo/AUTHORS U dillo/COPYING U dillo/ChangeLog U dillo/ChangeLog.old So I do need to login first. That's with CVS version 1.10.7 , on SuSE7.0 . On a different system, the "checkout without login" works, that's with CVS version 1.11.1p1 . Maybe the "checkout without login" only works in later releases of CVS? (I didn't find anything in the NEWS file, though)

Feb. 13, 2003

Re: [Dillo-dev] Website improvement / CVS page

by Thorben Thuermer

On Thu, Feb 13, 2003 at 02:58:56PM +0100, Sebastian Leske wrote: > Hi, > > as I could not find some webmaster contact address at the website at > http://dillo.auriga.wearlab.de/ , I'm posting to this list. For the project website (http://dillo.auriga.wearlab.de/) you're probably right here, for the auriga site (where the instructions were copied from, http://auriga.wearlab.de/cvs/?group_id=18) it would be something like admin(a)auriga.wearlab.de (which would be me). > I like the idea of providing some information on how to checkout the CVS > version of dillo, so people without CVS experience can try it out. > > However, the information about CVS given on > http://dillo.auriga.wearlab.de/cvs.html > is incomplete. The page give the command to to a checkout, but it neglects > to mention that you first have to do a login with an empty password. > > I'd propose you change the page to read: > > Check out from our server at wearLab! > > Just run these two commands: > > cvs -z3 -d:pserver:anonymous@auriga.wearlab.de:/sfhome/cvs/dillo login > cvs -z3 -d:pserver:anonymous@auriga.wearlab.de:/sfhome/cvs/dillo co dillo > > When prompted for a password, just press Return. A new directory will > be created with the current CVS version of dillo. Auriga is not sourceforge. when setting up our cvs repositories, we found that it is possible to have anoncvs WITHOUT login, and it seemed a very good idea to use that, because the additional login step only confuses users. just as the dillo homepage says, you 'Just:' just to show that the password was not read from there: user@host[/tmp]$ mv ~/.cvspass ~/.cvspass_bak user@host[/tmp]$ cvs -z3 -d :pserver:anonymous@cvs.auriga.wearlab.de:/sfhome/cvs/dillo co dillo cvs checkout: failed to open /home/user/.cvspass for reading: No such file or directory cvs server: Updating dillo U dillo/AUTHORS U dillo/COPYING without login. are you SURE you need login for it to work? we haven't heard of any problems with this before. > Greetings and keep up the good work on Dillo! > S.Leske Greetings, Thorben Thuermer (r00t(a)wearlab.de)

Feb. 13, 2003

Website improvement / CVS page

by Sebastian Leske

Hi, as I could not find some webmaster contact address at the website at http://dillo.auriga.wearlab.de/ , I'm posting to this list. I like the idea of providing some information on how to checkout the CVS version of dillo, so people without CVS experience can try it out. However, the information about CVS given on http://dillo.auriga.wearlab.de/cvs.html is incomplete. The page give the command to to a checkout, but it neglects to mention that you first have to do a login with an empty password. I'd propose you change the page to read: Check out from our server at wearLab! Just run these two commands: cvs -z3 -d:pserver:anonymous@auriga.wearlab.de:/sfhome/cvs/dillo login cvs -z3 -d:pserver:anonymous@auriga.wearlab.de:/sfhome/cvs/dillo co dillo When prompted for a password, just press Return. A new directory will be created with the current CVS version of dillo. Greetings and keep up the good work on Dillo! S.Leske PS: Please CC me on replies, I'm not subscribed.

Feb. 13, 2003

Re: [Dillo-dev] Is this list dead ?

by Sebastian Geerken

On Wed, Feb 12, Lars Segerlund wrote: > I haven't gotten any trafic lately ? In the past, this has always been a good sign: low list traffic has meant high productivity :-) > Also why is the dpi not in the cvs ? It is. Be sure that you use the new CVS server (at auriga.wearlab.de), the one at CIPSGA is not used anymore. See <http://dillo.auriga.wearlab.de/cvs.html> for more info. Sebastian

Feb. 12, 2003