- Dillo-dev - lists.mailman3.com

Re: [Dillo-dev] cvs not compiling ?

by slymer＠slymer.org

On Fri, 17 Jan 2003 17:39:37 +0100 Jan Stary <jsta6559(a)artax.karlin.mff.cuni.cz> wrote: > On the homepage, there is a link 'Links', which points to a > page containing a link to 'Russian encoding patches' or > something similar. On that site you can find the patches and > the 070pre1 tarball. (Of course, adding an encoding is a > general task, so it's doesn't only add Russian encoding, but > many others). Seems it has been updated now. However it says there that the compilation is different, but does not say what one has to do to compile :/ -- People tend to make rules for others and exceptions for themselves. Registered Linux user #298569

Jan. 17, 2003

Re: [Dillo-dev] cvs not compiling ?

by slymer＠slymer.org

On Fri, 17 Jan 2003 10:33:50 +0100 Jan Stary <jsta6559(a)artax.karlin.mff.cuni.cz> wrote: > Similar problem here. I just checked out, and I get > > hans@jorgen dillo$ pwd > /home/hans/src/dillo > hans@jorgen dillo$ ./configure --prefix=$HOME --disable-ipv6 > [ .. no problem here, all libraries found etc .. ] > config.status: executing default-1 commands I looked at the old configure script, and a few others. The configure script from CVS does not check for aclocal, autoconf etc.. OTOH. what is the URL you have used to get the patch you meantioned in an earlier e-mail ? -- People tend to make rules for others and exceptions for themselves. Registered Linux user #298569

Jan. 17, 2003

Re: [Dillo-dev] cvs not compiling ?

by Jan Stary

On Jan 17 18:43:24, slymer(a)slymer.org wrote: :On Fri, 17 Jan 2003 10:33:50 +0100 :Jan Stary <jsta6559(a)artax.karlin.mff.cuni.cz> wrote: : :> Similar problem here. I just checked out, and I get :> :> hans@jorgen dillo$ pwd :> /home/hans/src/dillo :> hans@jorgen dillo$ ./configure --prefix=$HOME --disable-ipv6 :> [ .. no problem here, all libraries found etc .. ] :> config.status: executing default-1 commands : :I looked at the old configure script, and a few others. The :configure script from CVS does not check for aclocal, autoconf :etc.. Yeah; it seems it only looks for *.h, -lib*, etc, and the check for aclocal & company is only done when you 'make' - it runs './missing', which tries to run aclocal, autoconf and automake. And in the case of autoconf, it fails (because of 'undefined macros' AC_CONFIG_FILES and AC_CONFIG_SRCDIR in configure.in) and says autoconf is not installed - at least that's what happens on my machine, which is Debian testing with autoconf 2.13 :OTOH. what is the URL you have used to get the patch you :meantioned in an earlier e-mail ? On the homepage, there is a link 'Links', which points to a page containing a link to 'Russian encoding patches' or something similar. On that site you can find the patches and the 070pre1 tarball. (Of course, adding an encoding is a general task, so it's doesn't only add Russian encoding, but many others). Jan : :-- :People tend to make rules for others and exceptions for :themselves. :Registered Linux user #298569 : :_______________________________________________ :Dillo-dev mailing list :Dillo-dev@lists.auriga.wearlab.de :http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev

Jan. 17, 2003

Re: [Dillo-dev] cvs not compiling ?

by Jan Stary

Similar problem here. I just checked out, and I get hans@jorgen dillo$ pwd /home/hans/src/dillo hans@jorgen dillo$ ./configure --prefix=$HOME --disable-ipv6 [ .. no problem here, all libraries found etc .. ] config.status: executing default-1 commands hans@jorgen dillo$ make cd . && \ /bin/sh /home/hans/src/dillo/missing --run automake --gnu Makefile cd . && /bin/sh /home/hans/src/dillo/missing --run autoconf autoconf: Undefined macros: configure.in:153:AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile src/IO/Makefile]) configure.in:4:AC_CONFIG_SRCDIR([src/dillo.c]) WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. /bin/sh ./config.status --recheck running /bin/sh ./configure --prefix=/home/hans --disable-ipv6 --no-create --no-recursion creating cache ./config.cache ./configure: line 549: syntax error near unexpected token `src/dillo.c' ./configure: line 549: `AC_CONFIG_SRCDIR(src/dillo.c)' make: *** [config.status] Error 2 hans@jorgen dillo$ autoconf --version Autoconf version 2.13 hans@jorgen dillo$ m4 --version GNU m4 1.4 There must be something wrong with the configure script thinking there's no autoconf. And 'undefined macros' - is this an autoconf bug? Strangely, when I just dnl'ed the AC_CONFIG_FILES and AC_CONFIG_SRCDIR in configure.in, everything compiles ok and runs without problems. Jan On Jan 17 10:43:10, slymer(a)slymer.org wrote: : :I'm having trouble compiling from CVS. After I get all the files :updated, I do a ./configure, and after that a make. I get this: : :======================================= :[silviu@localhost dillo]$ make :cd . && \ : /bin/sh /home/silviu/Sources/dillo/missing --run automake :--gnu Makefile cd . && /bin/sh :/home/silviu/Sources/dillo/missing --run autoconf autoconf: :Undefined macros: configure.in:153:AC_CONFIG_FILES([Makefile :doc/Makefile src/Makefile src/IO/Makefile]) :configure.in:4:AC_CONFIG_SRCDIR([src/dillo.c]) WARNING: :`autoconf' is missing on your system. You should only need it :if you modified `configure.in'. You might want to :install the `Autoconf' and `GNU m4' packages. Grab them :from any GNU archive site. :/bin/sh ./config.status --recheck :running /bin/sh ./configure --no-create --no-recursion :creating cache ./config.cache :./configure: line 549: syntax error near unexpected token :`AC_CONFIG_SRCDIR(src/dillo.c)'./configure: line 549: :`AC_CONFIG_SRCDIR(src/dillo.c)' make: *** [config.status] Error :2 :====================================== : :What am I doing wrong ? : :-- :People tend to make rules for others and exceptions for :themselves. :Registered Linux user #298569 : :_______________________________________________ :Dillo-dev mailing list :Dillo-dev@lists.auriga.wearlab.de :http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev ----- End forwarded message -----

Jan. 17, 2003

cvs not compiling ?

by slymer＠slymer.org

I'm having trouble compiling from CVS. After I get all the files updated, I do a ./configure, and after that a make. I get this: ======================================= [silviu@localhost dillo]$ make cd . && \ /bin/sh /home/silviu/Sources/dillo/missing --run automake --gnu Makefile cd . && /bin/sh /home/silviu/Sources/dillo/missing --run autoconf autoconf: Undefined macros: configure.in:153:AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile src/IO/Makefile]) configure.in:4:AC_CONFIG_SRCDIR([src/dillo.c]) WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. /bin/sh ./config.status --recheck running /bin/sh ./configure --no-create --no-recursion creating cache ./config.cache ./configure: line 549: syntax error near unexpected token `AC_CONFIG_SRCDIR(src/dillo.c)'./configure: line 549: `AC_CONFIG_SRCDIR(src/dillo.c)' make: *** [config.status] Error 2 ====================================== What am I doing wrong ? -- People tend to make rules for others and exceptions for themselves. Registered Linux user #298569

Jan. 17, 2003

Re: [Dillo-dev] Dillo 0.7.0 idintifies itself as 0.6.6

by Sebastian Geerken

On Thu, Jan 16, Jan Stary wrote: > [...] > Now, I have applied Grigoriy's patches to d070pre-v1.tgz and it works > great, except it seems this dillo 0.7.0pre1 identifies itself as > "dillo/0.6.6" in my apache logs. > > Jan > > PS: What's the fuzz with the homepage. Both sourceforge and freshmeat > have 0.6.x as it's last release, ????.br is dead, and wearlab.de, which > seems to be the current homepage, doesn't provide the 0.7.0 tarball - > I only downloaded it from Grigoriy's page ... Version 0.7.0 has not been released yet (expect it soon). For using 0.7.0-pre, see http://dillo.auriga.wearlab.de/cvs.html how to get from CVS. Sebastian

Jan. 16, 2003

Re: [Dillo-dev] Web pages - compatibility

by Sebastian Geerken

On Thu, Jan 09, Andreas Schweitzer wrote: > Since I'm not quite sure who is maintainig the web pages > I send it here : > The Compatibility page should list the BSD's as follows > > [...] I have access to the web page, but, strangely, no write access to "Compatibly.html". The template is already changed, but you'll have to wait for Jorge to generate the page itself. Sebastian

Jan. 16, 2003

Re: [Dillo-dev] Dillo 0.7.0 idintifies itself as 0.6.6

by Grigory Bakunov

On Thu, 16 Jan 2003 14:34:11 +0100 Jan Stary <jsta6559(a)artax.karlin.mff.cuni.cz> wrote: JS> Firstly: thank you guys for what you did! I have just discovered dillo JS> yesterday and it's my browser of choice since then. So fast! JS> Now, I have applied Grigoriy's patches to d070pre-v1.tgz and it works JS> great, except it seems this dillo 0.7.0pre1 identifies itself as JS> "dillo/0.6.6" in my apache logs. I need to say what my tarball very outdated. Also i need to say what patch is outdated too. If you need fresh patch - just mail me, or wait before i update patch on web (i think i do it tomorrow). ........................................................................ IRC: irc.openprojects.net #asplinux Grigory Bakunov EMAIL: black(a)asplinux.ru ASPLinux Support Team ICQ: 51369901 http://www.asplinux.ru -----BEGIN GEEK CODE BLOCK----- GCS/MU d-(--) s:- a- C+++>++$ UBLAVSX+++$ P+ L++++$ E++$ W++ N+>- o? K? w-- O- M V-(--) PS+ PE+ !Y PGP+>++++ t+ 5++ X+++ R+++ tv+>-- b+++ ?DI D+ G++ e>++$ h- r++ y+ z++(+++) ------END GEEK CODE BLOCK------

Jan. 16, 2003

Dillo 0.7.0 idintifies itself as 0.6.6

by Jan Stary

Firstly: thank you guys for what you did! I have just discovered dillo yesterday and it's my browser of choice since then. So fast! Now, I have applied Grigoriy's patches to d070pre-v1.tgz and it works great, except it seems this dillo 0.7.0pre1 identifies itself as "dillo/0.6.6" in my apache logs. Jan PS: What's the fuzz with the homepage. Both sourceforge and freshmeat have 0.6.x as it's last release, ????.br is dead, and wearlab.de, which seems to be the current homepage, doesn't provide the 0.7.0 tarball - I only downloaded it from Grigoriy's page ...

Jan. 16, 2003

Re: Dillo-dev -- confirmation of subscription -- request 171913

by Pierre Maon

On Sat, 11 Jan 2003 20:29:02 +0100 dillo-dev-request(a)auriga.wearlab.de wrote: > Dillo-dev -- confirmation of subscription -- request 171913 > > We have received a request from 80.200.21.57 for subscription of your > email address, <boussouf(a)rez-gif.supelec.fr>, to the > dillo-dev(a)lists.auriga.wearlab.de mailing list. To confirm the > request, please send a message to > dillo-dev-request(a)lists.auriga.wearlab.de, and either: > > - maintain the subject line as is (the reply's additional "Re:" is > ok), > > - or include the following line - and only the following line - in the > message body: > > confirm 171913 > > (Simply sending a 'reply' to this message should work from most email > interfaces, since that usually leaves the subject line in the right > form.) > > If you do not wish to subscribe to this list, please simply disregard > this message. Send questions to > dillo-dev-admin(a)lists.auriga.wearlab.de. >

Jan. 12, 2003