- Dillo-dev - lists.mailman3.com

patch: fix numeric ipv6 address handling

by jcid＠dillo.org

On Sun, Oct 05, 2008 at 01:49:29AM +0200, Justus Winter wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hey all :) > > there were two problems preventing the use of numeric ipv6 literals: > > 1. splitting the authority in hostname and port > > the attached patch fixes the handling of numeric ipv6 addresses entered > into the url bar. a_Url_hostname got the colons delimiting the 8 groups > of hexadecimal digits of an ipv6 address confused with a port number. Committed to CVS (not in the already made release). > 2. joining hostname and port for the Host: header > > a_Http_make_query_str used to build the Host: header by concatenating > the url->hostname with the port number in case it's not the default > port. Unfortunately this breaks with numeric ipv6 addresses since an > ipv6 literal has to be enclosed with square brackets when used in urls > and Host: header fields (according to my experiments and my > interpretation of rfc 2616 section 14.23 ("Host header") and 3.2.2 > ("http URL")). > > I would therefore suggest to use the original authority string obtained > from the url. Patch is attached. AFAIR, the "remove default port" part was added because some sites answer 404 when receiving it. I'd prefer a patch that handles IPv6 like you suggest, and IPv4 as now. -- Cheers Jorge.-

Oct. 14, 2008

Dillo Packages

by akemnade＠tzi.de

On Tue, 14 Oct 2008 09:56:40 -0300 Jorge Arellano Cid <jcid(a)dillo.org> wrote: > Hi Andreas, > > On Mon, Oct 13, 2008 at 11:09:25PM +0200, Andreas Kemnade wrote: > > Hi, > > > > On Mon, 13 Oct 2008 15:27:19 -0300 > > Jorge Arellano Cid <jcid(a)dillo.org> wrote: > > > > > Hi, > > > > > > I'd like to have packages for Debian and some RPMs. > > > Kelson already committed himself with the RPMs, and although > > > I can make i32 and i64 Debian packages, I'm a newbie on it. > > > > > I played a bit with the deb stuff and created a .deb for debian testing. > > I have put a .deb file in http://misc.andi.de1.cc/dillo > > I installed the correct fltk snapshot before using the usual ./configure && make && make install, > > and built the .deb after that. This handling of the fltk dependancy is > > not very clean... I guess the cleaner one would be to have > > fltk2 packages, but as fltk2 is linked statically against dillo, > > at least the .deb package should work. > > How do I get an etch .deb from your work? I have uploaded one to the place where the other .deb is. If you want to do it yourself: Unpack the sources, apply the debian patch cd into that directory, dpkg-buildpackage -rfakeroot you have to install the packages debhelper, debmake, devscripts and fakeroot (I hope I don't miss one) Greetings Andreas Kemnade

Oct. 14, 2008

Dillo Packages

by jcid＠dillo.org

On Mon, Oct 13, 2008 at 02:22:49PM -0700, Kelson Vibber wrote: > Jorge Arellano Cid wrote: >> I'd like to have packages for Debian and some RPMs. >> Kelson already committed himself with the RPMs, and although >> I can make i32 and i64 Debian packages, I'm a newbie on it. > > Here's the status on the RPMs. I've built the following: > > Fedora 9, x86_64 > RHEL 3, x86 > RHEL 4, x86 and x86_64 > RHEL 5, x86 and x86_64 Excellent. Thanks a lot. -- Cheers Jorge.-

Oct. 14, 2008

Dillo Packages

by jcid＠dillo.org

Hi Andreas, On Mon, Oct 13, 2008 at 11:09:25PM +0200, Andreas Kemnade wrote: > Hi, > > On Mon, 13 Oct 2008 15:27:19 -0300 > Jorge Arellano Cid <jcid(a)dillo.org> wrote: > > > Hi, > > > > I'd like to have packages for Debian and some RPMs. > > Kelson already committed himself with the RPMs, and although > > I can make i32 and i64 Debian packages, I'm a newbie on it. > > > I played a bit with the deb stuff and created a .deb for debian testing. > I have put a .deb file in http://misc.andi.de1.cc/dillo > I installed the correct fltk snapshot before using the usual ./configure && make && make install, > and built the .deb after that. This handling of the fltk dependancy is > not very clean... I guess the cleaner one would be to have > fltk2 packages, but as fltk2 is linked statically against dillo, > at least the .deb package should work. How do I get an etch .deb from your work? -- Cheers Jorge.-

Oct. 14, 2008

*bump*

by jcid＠dillo.org

On Tue, Oct 14, 2008 at 01:49:22AM +0200, Justus Winter wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Justus Winter wrote: > > Hey all :) > > > > there were two problems preventing the use of numeric ipv6 literals: > > > > 1. splitting the authority in hostname and port > > [...] > > 2. joining hostname and port for the Host: header > Any comments? Any chances of getting those two in for the release? I do > consider ipv6 support somewhat important these days... ;) It will go after the release. Changing the query string in this moment gives me shudders! :-o -- Cheers Jorge.-

Oct. 14, 2008

aclocal.m4 and autom4te.cache in CVS

by onepoint＠starurchin.org

On Mon, Oct 13, 2008 at 04:19:59PM +0200, Johannes Hofmann wrote: > On Mon, Oct 13, 2008 at 02:06:32PM +0100, Jeremy Henty wrote: > > BTW, is anyone else using git like this? I thought I saw some > > patches on the list that looked git-generated. > > I'm using mercurial, which uses a similar patch format for exporting > patches. Ah, it was probably your patches I was thinking of. Jeremy

Oct. 14, 2008

*bump*

by 4winter＠informatik.uni-hamburg.de

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Justus Winter wrote: > Hey all :) > > there were two problems preventing the use of numeric ipv6 literals: > > 1. splitting the authority in hostname and port > [...] > 2. joining hostname and port for the Host: header Any comments? Any chances of getting those two in for the release? I do consider ipv6 support somewhat important these days... ;) Justus -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFI896CoPmwNWhsaZYRAj/cAKCSkIWOj2HpIMnaJPfLGEczSe+SpQCeNINO 1pqXTIFLO41SZi/4XLBCWsA= =BbKT -----END PGP SIGNATURE-----

Oct. 14, 2008

Dillo Packages

by kelson＠pobox.com

Jorge Arellano Cid wrote: > I'd like to have packages for Debian and some RPMs. > Kelson already committed himself with the RPMs, and although > I can make i32 and i64 Debian packages, I'm a newbie on it. Here's the status on the RPMs. I've built the following: Fedora 9, x86_64 RHEL 3, x86 RHEL 4, x86 and x86_64 RHEL 5, x86 and x86_64 Unfortunately I don't have access to any 32-bit Fedora boxes right now, but I should be able to build it with mock if I can figure out how to convince it to install the fltk package I've built. My old build system is in storage (way in the back, under a bunch of boxes, so not easy to get at), so it will be a while before I can build/test on any other distributions. If anyone here has a 32-bit Fedora 9 box and would like to contribute an RPM, or another RPM-based distribution (SuSE, Mandriva, etc.), here are the source RPMs I'm using. http://www.hyperborea.org/software/dillo/rpms/fltk2-2.0.x.r6403-0.1.src.rpm http://www.hyperborea.org/software/dillo/rpms/dillo-2.0-1.src.rpm Directions for building the Dillo RPM: 1. Ideally, set up an RPM build tree in your home directory so you can build as yourself and not as root. (I think directions are up at rpm.org) 2. Build the fltk RPM: rpmbuild --rebuild fltk2-2.0.x.r6403-0.1.src.rpm 3. Install the fltk RPM (as root, or sudo) rpm -ivh /path/to/rpm/file 4. Build the dillo RPM: rpmbuild --rebuild dillo-2.0-1.src.rpm 5. Install the dillo RPM: rpm -ivh /path/to/rpm/file Possible issues with these SRPMS; - I don't have all the build dependencies set properly. - Distro-specific code on the Dillo SRPM may be out of date. - If you already have FLTK2 installed, you can skip the FLTK RPM and add --nodeps to the commandline in step 4. -- Kelson Vibber Hyperborea.org - SpeedForce.org - AlternativeBrowserAlliance.com

Oct. 13, 2008

Dillo Packages

by jcid＠dillo.org

On Mon, Oct 13, 2008 at 11:09:25PM +0200, Andreas Kemnade wrote: > Hi, > > On Mon, 13 Oct 2008 15:27:19 -0300 > Jorge Arellano Cid <jcid(a)dillo.org> wrote: > > > Hi, > > > > I'd like to have packages for Debian and some RPMs. > > Kelson already committed himself with the RPMs, and although > > I can make i32 and i64 Debian packages, I'm a newbie on it. > > > I played a bit with the deb stuff and created a .deb for debian testing. > I have put a .deb file in http://misc.andi.de1.cc/dillo > I installed the correct fltk snapshot before using the usual ./configure && make && make install, > and built the .deb after that. This handling of the fltk dependancy is > not very clean... I guess the cleaner one would be to have > fltk2 packages, but as fltk2 is linked statically against dillo, > at least the .deb package should work. > I basically took the old .diff.gz for dillo 0.8.6 from deb-lenny and deleted the i18n stuff. Great Andreas. I added the link to that page. Would you mind packing it with "make install-strip"? -- Cheers Jorge.-

Oct. 13, 2008

Dillo Packages

by akemnade＠tzi.de

Hi, On Mon, 13 Oct 2008 15:27:19 -0300 Jorge Arellano Cid <jcid(a)dillo.org> wrote: > Hi, > > I'd like to have packages for Debian and some RPMs. > Kelson already committed himself with the RPMs, and although > I can make i32 and i64 Debian packages, I'm a newbie on it. > I played a bit with the deb stuff and created a .deb for debian testing. I have put a .deb file in http://misc.andi.de1.cc/dillo I installed the correct fltk snapshot before using the usual ./configure && make && make install, and built the .deb after that. This handling of the fltk dependancy is not very clean... I guess the cleaner one would be to have fltk2 packages, but as fltk2 is linked statically against dillo, at least the .deb package should work. I basically took the old .diff.gz for dillo 0.8.6 from deb-lenny and deleted the i18n stuff. Greetings Andreas Kemnade

Oct. 13, 2008