- Dillo-dev - lists.mailman3.com

handling frames and chaging fontsize?

by Globe Trotter

Is it possible to read a page with frames in dillo? Also, how does one increase fontsize? The website www.expresindia.com does not read very well on my laptop -- do others also have a similar problem? Many thanks! __________________________________ Yahoo! Music Unlimited Access over 1 million songs. Try it free. http://music.yahoo.com/unlimited/

Oct. 9, 2005

Re: [Dillo-dev] Re: Cross Compiling Dillo Error Messages

by Falls Huang

Xyber Blue wrote: > By the way, in addition to my question, Im trying to run dillo with > japanese support. > I already set the export LC_LANG=ja_JP.UTF-8 and other options to set > to run dillo with japanese support. I succeeded the japanese support > of dillo on PC. > > I already installed the fonts, but when I try to do the same steps to > the target embedded system FR-V board and try to run dillo, the > warning message appeared: > > Gdk-WARNING **: locale not supported by C library > > And it fails to display japanese characters sites. > Does anyone encounter the same as mine??? Any ideas on how to fix this > and able to run dillo with japanese support??? > make sure that /usr/lib/locale/locale-archive exists and it's encoded in MSB , because frv cpu is MSB . -- Regards Falls Huang

Oct. 5, 2005

Re: Cross Compiling Dillo Error Messages

by Xyber Blue

By the way, in addition to my question, Im trying to run dillo with japanese support. I already set the export LC_LANG=ja_JP.UTF-8 and other options to set to run dillo with japanese support. I succeeded the japanese support of dillo on PC. I already installed the fonts, but when I try to do the same steps to the target embedded system FR-V board and try to run dillo, the warning message appeared: Gdk-WARNING **: locale not supported by C library And it fails to display japanese characters sites. Does anyone encounter the same as mine??? Any ideas on how to fix this and able to run dillo with japanese support??? On 10/4/05, Xyber Blue <xyberblue(a)gmail.com> wrote: > Thanks guys, I already got cross compiled the glib-1.2 and gtk-1.2 for > Fujitsu FRV. For reference, I successfully cross compiled the > glib-1.2.10and > gtk-1.2.9 to get dillo working. > > Heres the site where it contains fixes for cross compiling glib-1.2.10: > > http://cvs.sourceforge.jp/cgi-bin/viewcvs.cgi/xqt/libs/glib > > By the way, did someone here get dillo working with japanese characters??? > The patch dillo for japanese that Im using still didn't display japanese > characters. Any hints guys??? > > Thanks.... > > > On 10/3/05, Falls Huang <bhuang(a)qubit-star.com> wrote: > > > > I have successfully ported dillo to fujitsu's frv platform and arm-linux. > > > > 1. I didn't cross-compile glib1.2 in frv-linux , I natively compiled it > > . It's a long time wait , but I finnaly finished it. :) > > > > 2. If u want to cross-compile dillo/glib1.2/gtk1.2 in arm-linux , I > > suggest that u use scratchbox ( > www.scratchbox.org<http://www.scratchbox.org>). If u don't like > > spend time on compiling it , you can download a pre-compiled binary > > dillo-arm from gpe.handhelds.org <http://gpe.handhelds.org> . > > > > good luck > > > > > > Xyber Blue wrote: > > > Ok, so Gtk2 is not supported by dillo. Currently, Im trying to port the > > > Gtk1.2 but having hard time to port the glib. Glib1.2 seems hard to > > cross > > > compile. Does anyone here had tried to port dillo to Gtk2??? > > > > > > Does anyone here successfully port dillo, glib1.2, and gtk1.2 to ARM??? > > > > > > > -- > > Regards > > Falls Huang > > > > _______________________________________________ > > Dillo-dev mailing list > > Dillo-dev(a)dillo.org > > http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev > > > >

Oct. 5, 2005

Re: [Dillo-dev] Cross Compiling Dillo Error Messages

by Xyber Blue

Thanks guys, I already got cross compiled the glib-1.2 and gtk-1.2 for Fujitsu FRV. For reference, I successfully cross compiled the glib-1.2.10and gtk-1.2.9 to get dillo working. Heres the site where it contains fixes for cross compiling glib-1.2.10: http://cvs.sourceforge.jp/cgi-bin/viewcvs.cgi/xqt/libs/glib By the way, did someone here get dillo working with japanese characters??? The patch dillo for japanese that Im using still didn't display japanese characters. Any hints guys??? Thanks.... On 10/3/05, Falls Huang <bhuang(a)qubit-star.com> wrote: > > I have successfully ported dillo to fujitsu's frv platform and arm-linux. > > 1. I didn't cross-compile glib1.2 in frv-linux , I natively compiled it > . It's a long time wait , but I finnaly finished it. :) > > 2. If u want to cross-compile dillo/glib1.2/gtk1.2 in arm-linux , I > suggest that u use scratchbox ( www.scratchbox.org<http://www.scratchbox.org>). If u don't like > spend time on compiling it , you can download a pre-compiled binary > dillo-arm from gpe.handhelds.org <http://gpe.handhelds.org> . > > good luck > > > Xyber Blue wrote: > > Ok, so Gtk2 is not supported by dillo. Currently, Im trying to port the > > Gtk1.2 but having hard time to port the glib. Glib1.2 seems hard to > cross > > compile. Does anyone here had tried to port dillo to Gtk2??? > > > > Does anyone here successfully port dillo, glib1.2, and gtk1.2 to ARM??? > > > > -- > Regards > Falls Huang > > _______________________________________________ > Dillo-dev mailing list > Dillo-dev(a)dillo.org > http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev >

Oct. 4, 2005

Re: [Dillo-dev] current no-cache patch?

by Paul Fox

i posted this some time ago. are there any developers on the list? i'm wondering if i should just give up on using dillo for any real projects... paul > > > i was surprised when i figured out that the current dillo code > doesn't support any sort of "no cache" or "expires" facility. > > it seems that this was done in 2003, in a patch referenced here: > http://lists.auriga.wearlab.de/pipermail/dillo-dev/2003-August/001039.html > > i tried applying it, and resolving the (many) differences myself, but i > seem to have botched it, because now some of my pages don't display at > all. :-) > > is there a more current version of this patch around? i think it's > important functionality... > > paul > =--------------------- > paul fox, pgf(a)foxharp.boston.ma.us (arlington, ma, where it's 77.5 degrees) > > _______________________________________________ > Dillo-dev mailing list > Dillo-dev(a)dillo.org > http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev =--------------------- paul fox, pgf(a)foxharp.boston.ma.us (arlington, ma, where it's 52.9 degrees)

Oct. 3, 2005

Re: [Dillo-dev] Cross Compiling Dillo Error Messages

by Falls Huang

I have successfully ported dillo to fujitsu's frv platform and arm-linux. 1. I didn't cross-compile glib1.2 in frv-linux , I natively compiled it . It's a long time wait , but I finnaly finished it. :) 2. If u want to cross-compile dillo/glib1.2/gtk1.2 in arm-linux , I suggest that u use scratchbox ( www.scratchbox.org ). If u don't like spend time on compiling it , you can download a pre-compiled binary dillo-arm from gpe.handhelds.org . good luck Xyber Blue wrote: > Ok, so Gtk2 is not supported by dillo. Currently, Im trying to port the > Gtk1.2 but having hard time to port the glib. Glib1.2 seems hard to cross > compile. Does anyone here had tried to port dillo to Gtk2??? > > Does anyone here successfully port dillo, glib1.2, and gtk1.2 to ARM??? > -- Regards Falls Huang

Oct. 3, 2005

Re: [Dillo-dev] Cross Compiling Dillo Error Messages

by Xyber Blue

Ok, so Gtk2 is not supported by dillo. Currently, Im trying to port the Gtk1.2 but having hard time to port the glib. Glib1.2 seems hard to cross compile. Does anyone here had tried to port dillo to Gtk2??? Does anyone here successfully port dillo, glib1.2, and gtk1.2 to ARM??? On 10/3/05, Riccardo Mottola <rollei(a)tiscalinet.it> wrote: > > Xyber Blue wrote: > > > > Hi Guys, > > > > Im planning to cross compile dillo to my target FR-V board. I already > > cross compiled gtk+-2.2.4 > > and already tested the sample program to the target. Currently, Im > > starting to cross compile dillo-0.8.5-i18n-misc-20050719. This is the > > patch version of dillo to display japanese characters. > > dillo uses gtk 1.2 and not gtk2 bloatware. > > -R >

Oct. 3, 2005

Re: [Dillo-dev] Cross Compiling Dillo Error Messages

by Riccardo Mottola

Xyber Blue wrote: > > Hi Guys, > > Im planning to cross compile dillo to my target FR-V board. I already > cross compiled gtk+-2.2.4 > and already tested the sample program to the target. Currently, Im > starting to cross compile dillo-0.8.5-i18n-misc-20050719. This is the > patch version of dillo to display japanese characters. dillo uses gtk 1.2 and not gtk2 bloatware. -R

Oct. 2, 2005

Cross Compiling Dillo Error Messages

by Xyber Blue

Hi Guys, Im planning to cross compile dillo to my target FR-V board. I already cross compiled gtk+-2.2.4 and already tested the sample program to the target. Currently, Im starting to cross compile dillo-0.8.5-i18n-misc-20050719. This is the patch version of dillo to display japanese characters. When Im trying to configure the dillo for cross compilation, It tries to find the gtk-config and glib-config from my target bin directory which is not found. Im trying to copy the said files from my host bin to my target bin and edit the target location of the scripts to my target. The configure options i initially tried is this: ./configure --prefix=/opt/gtk --host=frv-linux-gnu --build=i686-pc-linux-gnu --with-jpeg-lib=/opt/gtk/lib --with-jpeg-inc=/opt/gtk/include --with-glib-prefix=/opt/gtk --with-glib-exec-prefix=/opt/gtk --with-gtk-prefix=/opt/gtk --with-gtk-exec-prefix=/opt/gtk LIBZ_LIBS=/opt/gtk/lib LIBJPEG_LIBS=-L/opt/gtk/lib --without-libintl-prefix --without-libiconv-prefix The cross configure now detects it and successfully surpass the configure command. However, it does not detects the png and jpeg which is I successfully cross compiled already. when Im trying to issue a make command, it seems that it does not find gtk.h. When I try to issue a configure like this: ./configure --prefix=/opt/gtk --host=frv-linux-gnu --build=i686-pc-linux-gnu --with-jpeg-lib=/opt/gtk/lib --with-jpeg-inc=/opt/gtk/include --with-glib-prefix=/opt/gtk --with-glib-exec-prefix=/opt/gtk --with-gtk-prefix=/opt/gtk --with-gtk-exec-prefix=/opt/gtk LIBZ_LIBS=/opt/gtk/lib LIBJPEG_LIBS=-L/opt/gtk/lib --without-libintl-prefix --without-libiconv-prefix LDFLAGS=-L/opt/gtk/lib CPPFLAGS=-I/opt/gtk/include It finds my gtk.h and the said error on gtk.h disappear. However, when I issue the make command, error messages appear like this: ------------------------------------------------------------------------------------------------------------------------------------- In file included from /opt/gtk/include/gtk-2.0/gdk/gdkcolor.h:4, from /opt/gtk/include/gtk-2.0/gdk/gdk.h:30, from /opt/gtk/include/gtk-2.0/gtk/gtk.h:31, from mime.h:11, from mime.c:14: /opt/gtk/include/gtk-2.0/gdk/gdktypes.h:33:25: pango/pango.h: No such file or directory and so on..... ------------------------------------------------------------------------------------------------------------------------------------- This is where I stuck and don't know how to solve the problem. Does anyone here have any ideas on the solution of the said errors???Please help me guys.....

Oct. 2, 2005

tabs + frames with .deb

by Christian Holland

The dillo patch from http://teki.jpn.ph/pc/software/index-e.shtml fails sometimes. For me under solaris a core a runtime error occures with the following output: ---------------------------- ** WARNING **: no support enc Bus Error (core dumped) ---------------------------- To avoid the error, insert code from line 432-435 a_I18n_convert_raw() before line 455 a_I18n_convert(). So the return value of iconv_open() is checked and if it is not set do the iconv_open() again with defaults like in a_I18n_convert_raw(): gchar *a_I18n_convert( const gchar* from, const gchar* to, const gchar* buf, gint bufsize) { iconv_t it; gchar *outBuf; gint len; if (!buf) return NULL; if (bufsize == 0) return g_strdup(""); g_return_val_if_fail(from && to, g_strndup(buf, bufsize)); it = iconv_open(to, from); if (!it || it==(iconv_t)-1) { /* <========== start of insertion */ it = iconv_open("ASCII", DILLO_CHARSET); } /* =============== end of insertion */ len = (bufsize == -1) ? (gint)strlen(buf) : bufsize; if (len < 0) { MSG("a_I18n_convert: bufsize < 0\n"); return g_strdup(buf); } outBuf = a_I18n_convert_raw(it, buf, len); iconv_close(it); return outBuf; }

Sept. 26, 2005