- Dillo-dev - lists.mailman3.com

Re: [Dillo-dev] Frame support, suggestion: compile-option --xhtml-dtd

by Jorge Arellano Cid

On Wed, 6 Aug 2003, Frank de Lange wrote: > On Tue, Aug 05, 2003 at 11:39:59AM +0200, Frank de Lange wrote: > > This is in violation of the HTML specs (href is a required parameter for > > <base>). What should Dillo do in this case? Just as stated in our "HTML parsing policy" inside [Project Notes]! > > Currently it only checks for the > > target parameter after it has found a href in the tag (literal interpretation > > the definition of <base>), but this breaks pages like Namesys' which violate > > the standard. I can: > > > > a) unconditionally change the code so these pages work > > b) add a compile option (--pedantic-mode or --quirks-mode or whatever) to > > disable/enable these changes > > c) leave it the way it is > > > > I personally prefer b, which gives everyone a choice. Choice is good. We never take a) -- because of our policies, neither b) -- explained at http://ometer.com/features.html (available from our [Links] section) sometimes c) -- When we don't have time! :) In a nutshell: we try to follow the standard, not to crash on bad pages, and ideally send a warning when facing bad HTML. > Any suggestions/comments to my suggestion? As stated above. Cheers Jorge.-

Aug. 6, 2003

Re: [Dillo-dev] dillo-0.7.3.tar.bz2

by Jorge Arellano Cid

Kelson, > On Tuesday 05 August 2003 10:58 am, Jorge Arellano Cid wrote: > > Kelson, Phil, Oliver: please make update your packages with it. > > OK, packages are ready for: > Red Hat 6.2, 7.3, 8, 9 > Mandrake 8.2, 9.1, and 9.1 PPC > SuSE 8.2 > > I'm moving the RPM download page to http://www.hyperborea.org/software/dillo/ > (just replace the .html with a /). There's a server redirect in place, but > it wouldn't hurt to update the link. Done. > I've updated a separate copy of the page, so all I have to do is switch it in > when the release is ready. If anyone wants to check out the rpms early, go > to http://www.hyperborea.org/software/dillo/index-new.shtml Thanks a lot for your commitment! The announcement will be this Thursday's morning. Cheers Jorge.-

Aug. 6, 2003

Re: [Dillo-dev] dillo-0.7.3.tar.bz2

by Oliver Haertel

Slackpacks here: http://www.linuxpackages.net/details.php?name=dillo On Tue, 5 Aug 2003 13:58:31 -0400 (CLT) Jorge Arellano Cid wrote: > > Hi there! > > Yesterday I posted an email about 0.7.3 but forgot to mention > the most important part: the URL! :-) > > There's a tarball of 0.7.3 at: > > http://www.dillo.org/download/dillo-0.7.3.tar.bz2 > > > The plan was to test it yesterday (it already passed my tests > and Seb's too) and to announce it on Wednesday while letting our > packagers some time to update them for announce time. > > So there it is, and will be announced on Thursday. > > Please get it and give it some hard testing. > > Kelson, Phil, Oliver: please make update your packages with it. > > Sorry for the mistake. > > Cheers > Jorge.- > > Frank: after I upload 0.8.0-pre I'll have some time to look in > your work. Now that 0.7.3 release is almost done, I guess > Sebastian will have some time too (we were working on a plan for > CSS, and then Sebastian had to make a detailed review of the > incremental resizing mechanism because of some discovered bugs. I > was working on 0.8.0-pre (plugins) and on the release). All this > explanation is to state that it is not lack of interest, but lack > of manpower. You'd be amazed to know all of the things I'm > working in parallel. > > PS: the above note applies to all of you waiting for an answer > from my side... > > > _______________________________________________ > Dillo-dev mailing list > Dillo-dev(a)lists.auriga.wearlab.de > http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev >

Aug. 6, 2003

Re: [Dillo-dev] dillo-0.7.3.tar.bz2

by Kelson Vibber

At 05:06 AM 8/6/2003, Patrick Shanahan wrote: ><frown> and _no_ rpm for SuSE 8.1 (which is still widely utilized)? Does the SuSE 8.2 RPM not work on 8.1? Kelson Vibber kelson(a)pobox.com http://www.hyperborea.org/ Creative Writing - Photography - The Flash

Aug. 6, 2003

Re: [Dillo-dev] dillo-0.7.3.tar.bz2

by Madis Janson

On Tue, 5 Aug 2003, Jorge Arellano Cid wrote: > There's a tarball of 0.7.3 at: > > http://www.dillo.org/download/dillo-0.7.3.tar.bz2 > Some updated patches are avaible here: http://zone.ee/myzz/dillo/0.7.3/dillo-0.7.3-mzz.html The HTTPS stuff will go on top of dpi, when the dpi has enough functionality for it (i'm hoping a bit for the new dpid stuff). Possibly i'll try to hack something together in next month. PS. I'll create separate cache-control patch for current cvs, when there is a interest about merging it with the CVS (not before, because it would be to much trouble to mantain it separately).

Aug. 6, 2003

Re: [Dillo-dev] dillo-0.7.3.tar.bz2

by Patrick Shanahan

* Kelson Vibber <kelson(a)pobox.com> [08-06-03 02:07]: > On Tuesday 05 August 2003 10:58 am, Jorge Arellano Cid wrote: > > Kelson, Phil, Oliver: please make update your packages with it. > > OK, packages are ready for: > Red Hat 6.2, 7.3, 8, 9 > Mandrake 8.2, 9.1, and 9.1 PPC > SuSE 8.2 > > I'm moving the RPM download page to http://www.hyperborea.org/software/dillo/ > (just replace the .html with a /). There's a server redirect in place, but > it wouldn't hurt to update the link. > > I've updated a separate copy of the page, so all I have to do is switch it in > when the release is ready. If anyone wants to check out the rpms early, go > to http://www.hyperborea.org/software/dillo/index-new.shtml <frown> and _no_ rpm for SuSE 8.1 (which is still widely utilized)? -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org

Aug. 6, 2003

Porting Dillo to uClinux target

by Manigandan

Hi, I am trying to port dillo to uClinux based coldfire target(5272). Has some one already did this ?What should be my starting point ? Is there some good document for porting dillo to new targets ? Thanks, Mani

Aug. 6, 2003

Frame support, suggestion: compile-option --xhtml-dtd

by Frank de Lange

On Tue, Aug 05, 2003 at 11:39:59AM +0200, Frank de Lange wrote: > This is in violation of the HTML specs (href is a required parameter for > <base>). What should Dillo do in this case? Currently it only checks for the > target parameter after it has found a href in the tag (literal interpretation > the definition of <base>), but this breaks pages like Namesys' which violate > the standard. I can: > > a) unconditionally change the code so these pages work > b) add a compile option (--pedantic-mode or --quirks-mode or whatever) to > disable/enable these changes > c) leave it the way it is > > I personally prefer b, which gives everyone a choice. Choice is good. Having just worked my way through the XHTML-1.0 specifications (previous work was based on 3.2 and 4.01), I suggest the following: The next version of the patch will include a compile option '--xhtml-dtd' which can be set to 'strict', 'transitional' and 'frameset'. The 'strict' setting follows XHTML-1.0-Strict (and thus disables frames and frame-related code). With 'transitional' iframe is supported, frameset is not (leaving out the frameset-related code from the binary). Use 'frameset' for full frame support. Default setting will be 'frameset' to get the behaviour most people expect. Any suggestions/comments to my suggestion? Cheers//Frank -- WWWWW ________________________ ## o o\ / Frank de Lange \ }# \| / +46-734352015 \ \ `--| _/ <Hacker for Hire> \ `---' \ +31-640037120 / \ frank(a)unternet.org / `------------------------' [ "Omnis enim res, quae dando non deficit, dum habetur et non datur, nondum habetur, quomodo habenda est." ]

Aug. 6, 2003

Re: [Dillo-dev] dillo-0.7.3.tar.bz2

by Kelson Vibber

On Tuesday 05 August 2003 10:58 am, Jorge Arellano Cid wrote: > Kelson, Phil, Oliver: please make update your packages with it. OK, packages are ready for: Red Hat 6.2, 7.3, 8, 9 Mandrake 8.2, 9.1, and 9.1 PPC SuSE 8.2 I'm moving the RPM download page to http://www.hyperborea.org/software/dillo/ (just replace the .html with a /). There's a server redirect in place, but it wouldn't hurt to update the link. I've updated a separate copy of the page, so all I have to do is switch it in when the release is ready. If anyone wants to check out the rpms early, go to http://www.hyperborea.org/software/dillo/index-new.shtml -- Kelson Vibber www.hyperborea.org

Aug. 6, 2003

Re: [Dillo-dev] Question about frames (have them working, but...)

by Frank de Lange

On Tue, Aug 05, 2003 at 10:21:35AM -0700, Kelson Vibber wrote: > At 05:25 AM 8/5/2003, Frank de Lange wrote: > >That is caused by the extra <body> tag these sites add (lamlaw has a > >complete > >body section - something a frame document should not have, > > Of the various interpretations, I think the most *useful* would be either > to prefer the framest (which is what most authors intended) or to prefer > the element that appears first (which will usually be the frameset). In my current version, the default behaviour is tu use the frameset if it is found. I have added a compile option '--enable-strict' which turns off checks for cruddy HTML (and thus reduces code size a bit at the expense of ability to display non-standard documents). I might have misinterpreted the specs, so I will remove the '#ifndef STRICT' from the frameset code. /me goes off and finds a version of current HTML specs, mine are outdated... Cheers//Frank -- WWWWW ________________________ ## o o\ / Frank de Lange \ }# \| / +46-734352015 \ \ `--| _/ <Hacker for Hire> \ `---' \ +31-640037120 / \ frank(a)unternet.org / `------------------------' [ "Omnis enim res, quae dando non deficit, dum habetur et non datur, nondum habetur, quomodo habenda est." ]

Aug. 6, 2003