April 2014 - Dillo-dev - lists.mailman3.com

Segfault with development dillo

by onepoint＠starurchin.org

I wrote: > This URL reliably segfaults Dillo: > > http://freethoughtblogs.com/butterfliesandwheels/2014/04/where-will-brandei… In fact as far as I can tell *any* page from freethoughtblogs.com crashes Dillo, which suggests that it is site style that is causing it rather than the content. The page content downloads without any problem and Dillo starts rendering it and downloading images for a few seconds, then crashes. This suggests to me that it is still downloading the CSS and crashes when it tries to style the page. (I run Dillo inside valgrind so everything happens around 30x slower for me. I can clearly see Dillo restyling the page once the CSS has downloaded.) Regards, Jeremy Henty

April 14, 2014

Segfault with development dillo

by jcid＠dillo.org

Hi Jeremy, On Mon, Apr 14, 2014 at 07:22:35AM +0100, Jeremy Henty wrote: > > This URL reliably segfaults Dillo: > > http://freethoughtblogs.com/butterfliesandwheels/2014/04/where-will-brandei… > > I suspect this is due to a very recent change as for the past few days > Dillo has been crashing a lot, which until then hadn't happened in > ages. I haven't investigated further. > > Dillo (current hg tip), Linux 3.13.9, glibc 2.13, gcc 4.5.2 . Yes, after the dillo-3.0.4 release, the large work on floating elements was merged into the repository, leaving a very unstable and crashy dillo. Users should stick to dillo-3.0.4 in the meantime. IMO, we (developers) need to focus as a team on stabilizing this tree before planning any further enhancements. Only once this goal is met we can return to our usual workflow. -- Cheers Jorge.-

April 14, 2014

Segfault with development dillo

by sgeerken＠dillo.org

On Mo, Apr 14, 2014, Jeremy Henty wrote: > This URL reliably segfaults Dillo: > > http://freethoughtblogs.com/butterfliesandwheels/2014/04/where-will-brandei… > > I suspect this is due to a very recent change as for the past few days > Dillo has been crashing a lot, which until then hadn't happened in > ages. I haven't investigated further. > > Dillo (current hg tip), Linux 3.13.9, glibc 2.13, gcc 4.5.2 . Yes, everything after revision 3613 segfault; you can stick to this if you want to run the development version. (There are no important changes yet after this.) This is part of a couple of changes which I hoped to solve another problem, but which did not serve this purpose, so I'll probably soon revert these changes again. Sebastian

April 14, 2014

Segfault with development dillo

by onepoint＠starurchin.org

This URL reliably segfaults Dillo: http://freethoughtblogs.com/butterfliesandwheels/2014/04/where-will-brandei… I suspect this is due to a very recent change as for the past few days Dillo has been crashing a lot, which until then hadn't happened in ages. I haven't investigated further. Dillo (current hg tip), Linux 3.13.9, glibc 2.13, gcc 4.5.2 . Regards, Jeremy Henty

April 14, 2014

search_url: startpage.com?

by eocene＠gmx.com

noname wrote: > On Tue, Apr 08, 2014 at 04:02:53PM +0000, eocene wrote: > > > > It's rather too late for this release, but... > > > > Does anyone have any opinions about startpage.com? > > Looks like it is a better replacement for Scroogle then DuckDuckGo. I > think it should at least be added to the list of search engines along > with ixquick. startpage has a bad tendency to say "Because there are not enough results that match your query, we are showing results without quotes." but it seems to work properly if I specify the query like search_url="startpage http://www.startpage.com/do/search?query=%s&prfh=enable_exact_phraseEEE0N1N"

April 12, 2014

dillo-3.0.4 is just released!

by mailbox＠georgpotthast.de

> improved embedding > into other applications How does this work now? I would like to embed Dillo in my email program. When the user clicks a button the HTML email shall be displayed with the Dillo browser - at least that is the current plan if you did not implement it differently. Or can you make a libdillo.a from the rendering engine? Georg

April 11, 2014

Dillo and Irix

by eocene＠gmx.com

Jan wrote: > eocene wrote: > >The subscript 'i'? > > int i; > > it's defined in the function dStr_printable: Is it awkwardly trying to complain that it's signed?

April 11, 2014

Dillo and Irix

by diegel＠work.de

eocene wrote: > Jan wrote: >> I had a brief look at the dlib code. I don't think it's a problem >> with the va stuff. I have one warning when compiling dlib.c: >> >> /usr/nekoware/gcc-4.7/bin/gcc -DHAVE_CONFIG_H -I. -I.. -I.. >> -I/usr/local/include -I/usr/nekoware/include >> -I/usr/nekoware/gcc-4.7/include/c++/4.7.1 -I/usr/local/include >> -mtune=r5000 -mips4 -mabi=n32 -DD_DNS_THREADED -D_REENTRANT >> -D_THREAD_SAFE -Wall -W -Wno-unused-parameter -Waggregate-return -MT >> dlib.o -MD -MP -MF .deps/dlib.Tpo -c -o dlib.o dlib.c >> dlib.c: In function 'dStr_printable': >> dlib.c:514:7: warning: array subscript has type 'char' [-Wchar-subscripts] >> mv -f .deps/dlib.Tpo .deps/dlib.Po >> rm -f libDlib.a >> ar cru libDlib.a dlib.o >> : libDlib.a >> >> This is the line: >> >> if (isprint(in->str[i]) || (in->str[i] == '\n')) { >> >> isprintf is defined in Irix >> >> extern int isprint(int); > > The subscript 'i'? int i; it's defined in the function dStr_printable: /* * Return a printable representation of the provided Dstr, limited to a length * of roughly maxlen. * * This is NOT threadsafe. */ const char *dStr_printable(Dstr *in, int maxlen) { int i; static const char *const HEX = "0123456789ABCDEF"; static Dstr *out = NULL; if (in == NULL) return NULL; if (out) dStr_truncate(out, 0); else out = dStr_sized_new(in->len); for (i = 0; (i < in->len) && (out->len < maxlen); ++i) { if (isprint(in->str[i]) || (in->str[i] == '\n')) { dStr_append_c(out, in->str[i]); } else { dStr_append_l(out, "\\x", 2); dStr_append_c(out, HEX[(in->str[i] >> 4) & 15]); dStr_append_c(out, HEX[in->str[i] & 15]); } } if (out->len >= maxlen) dStr_append(out, "..."); return out->str; }

April 11, 2014

Dillo and Irix

by eocene＠gmx.com

Jan wrote: > I had a brief look at the dlib code. I don't think it's a problem > with the va stuff. I have one warning when compiling dlib.c: > > /usr/nekoware/gcc-4.7/bin/gcc -DHAVE_CONFIG_H -I. -I.. -I.. > -I/usr/local/include -I/usr/nekoware/include > -I/usr/nekoware/gcc-4.7/include/c++/4.7.1 -I/usr/local/include > -mtune=r5000 -mips4 -mabi=n32 -DD_DNS_THREADED -D_REENTRANT > -D_THREAD_SAFE -Wall -W -Wno-unused-parameter -Waggregate-return -MT > dlib.o -MD -MP -MF .deps/dlib.Tpo -c -o dlib.o dlib.c > dlib.c: In function 'dStr_printable': > dlib.c:514:7: warning: array subscript has type 'char' [-Wchar-subscripts] > mv -f .deps/dlib.Tpo .deps/dlib.Po > rm -f libDlib.a > ar cru libDlib.a dlib.o > : libDlib.a > > This is the line: > > if (isprint(in->str[i]) || (in->str[i] == '\n')) { > > isprintf is defined in Irix > > extern int isprint(int); The subscript 'i'?

April 10, 2014

Dillo and Irix

by diegel＠work.de

eocene wrote: > I wrote: >> Jan wrote: >>> eocene wrote: >>>> Jan wrote: >>>>> Query: {GE} >>>>> a_IO_ccc : OpSend [1B] Info=10262f30 Flags=0 >>>> "GE" is the entire query? >>> Yes exactly. Any idea? >> Can you watch what goes wrong in a_Http_make_query_str()? > > Between this and the file path thing, I wonder whether irix > doesn't like that va_list/va_copy/vsnprintf stuff in the dStr > code in dlib/dlib.c. I had a brief look at the dlib code. I don't think it's a problem with the va stuff. I have one warning when compiling dlib.c: /usr/nekoware/gcc-4.7/bin/gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I/usr/local/include -I/usr/nekoware/include -I/usr/nekoware/gcc-4.7/include/c++/4.7.1 -I/usr/local/include -mtune=r5000 -mips4 -mabi=n32 -DD_DNS_THREADED -D_REENTRANT -D_THREAD_SAFE -Wall -W -Wno-unused-parameter -Waggregate-return -MT dlib.o -MD -MP -MF .deps/dlib.Tpo -c -o dlib.o dlib.c dlib.c: In function 'dStr_printable': dlib.c:514:7: warning: array subscript has type 'char' [-Wchar-subscripts] mv -f .deps/dlib.Tpo .deps/dlib.Po rm -f libDlib.a ar cru libDlib.a dlib.o : libDlib.a This is the line: if (isprint(in->str[i]) || (in->str[i] == '\n')) { isprintf is defined in Irix extern int isprint(int);

April 10, 2014