July 2010 - Dillo-dev - lists.mailman3.com

Can't copy/paste, only urls

by rogerx＠sdf.org

AH HA! I spent a little more time in the past few minutes looking over the dillorc file to see if there's something I aimlessly missed option wise. Turns out I seem to have found the issue! This is what I had: # Mouse middle click by default drives drag-scrolling. # To paste an URL into the window instead of scrolling, set it to NO. # Note: You could always paste the URL onto the URL box clear button. middle_click_drags_page=NO I now changed it to: #middle_click_drags_page=NO Reran Dillo and I can now copy/paste into Dillo's web page forms without the output from the copy buffer always going into the Dillo url entry box! If this is the expected behavior of copy/paste when this option is set to "NO", then I'd suggest putting in a warning into the comment area of the dillorc that it will conflict with copy/paste operations when using the mouse middle button. Cheers!

July 24, 2010

captcha image not loading

by mr_semantics＠hotmail.com

---------------------------------------- > From: corvid(a)lavabit.com > Date: Fri, 23 Jul 2010 22:47:10 +0000 > To: dillo-dev(a)dillo.org > Subject: Re: [Dillo-dev] captcha image not loading > > If you're using the 2.2 release, you won't need the dillorc option. Good then - I nixed that bit. > It... _should_ like jpegs :) Loading the camaro image from the address bar, > for instance, works for me. > > In config.h, does it say "#define ENABLE_JPEG 1" ? > When you run the configure script, does it complain about finding jpeg > libraries or anything? Got it!? OpenSuse is not exactly a developer's distro out of the box - I was missing the dev libraries for jpeg.? When I had a look at the config.h, the thing about jpegs was actually #undefined.? I looked in my config log, and sure enough it was the missing libraries.? Thank you so much for your help - that was a great bit of troubleshooting on your part.? My wife will be quite pleased to have her speedy browser back in working condition. _________________________________________________________________ Game on: Challenge friends to great games on Messenger http://go.microsoft.com/?linkid=9734387

July 24, 2010

captcha image not loading

by corvid＠lavabit.com

Rob wrote: > Ah!? I should have known that what I was downloading might not be the official release.? In light of this, I grabbed the source from the downloads page (Dillo 2.2) and recompiled.? I also added the bit you suggested in my ~/.dillo/dillorc.? I seem to get a little further on the page this time, but still no captcha image, and the console has this: If you're using the 2.2 release, you won't need the dillorc option. > Nav_open_url: new url='http://dragcave.net/' > a_Nav_expect_done: repush! > CssParser::parseImport(): @import /layout/style.css > > Nav_open_url: new url='http://dragcave.net/login' > Connecting to 38.101.121.19 > CssParser::parseImport(): @import /layout/style.css > > Nav_open_url: new url='http://api.recaptcha.net/noscript?k=6LcrhgUAAAAAADK0fngEdAvVoD9-GQBOHvaYb0Wp' > Dns_server [0]: api.recaptcha.net is 69.12.97.165 > Connecting to 69.12.97.165 > Nav_open_url: new url='http://www.google.com/recaptcha/api/noscript?k=6LcrhgUAAAAAADK0fngEdAvVoD9-…' > Dns_server [0]: www.google.com is 173.194.33.104 > Connecting to 173.194.33.104 > HTTP warning: unhandled MIME type: "image/jpeg" > > I did a test of inserting a link to a jpeg image in the address bar, and instead of loading it, and I got this in the console: > > Nav_open_url: new url='http://www.1969-camaro.com/images/1969camaro1.jpg' > Dns_server [0]: www.1969-camaro.com is 72.9.233.117 > Connecting to 72.9.233.117 > Content-Type 'image/jpeg' not viewable. > a_UIcmd_save_link: (null) > > Of course it did not load the image, but the save image dialog box came up instead.? Have I somehow compiled it in such a way so as to not allow it to render jpeg images?? (The 'allow images' under the tools dialogue is checked, and the browser does load pngs.) It... _should_ like jpegs :) Loading the camaro image from the address bar, for instance, works for me. In config.h, does it say "#define ENABLE_JPEG 1" ? When you run the configure script, does it complain about finding jpeg libraries or anything?

July 24, 2010

captcha image not loading

by mr_semantics＠hotmail.com

---------------------------------------- > From: corvid(a)lavabit.com > Date: Fri, 23 Jul 2010 21:49:06 +0000 > To: dillo-dev(a)dillo.org > Subject: Re: [Dillo-dev] captcha image not loading > It sounds like you're using the current dillo code instead of the 2.2 > release. If you put "filter_auto_requests=allow_all" in dillorc, > it should go back to the behaviour of loading images that are from a > different domain than that of the page. Ah!? I should have known that what I was downloading might not be the official release.? In light of this, I grabbed the source from the downloads page (Dillo 2.2) and recompiled.? I also added the bit you suggested in my ~/.dillo/dillorc.? I seem to get a little further on the page this time, but still no captcha image, and the console has this: Nav_open_url: new url='http://dragcave.net/' a_Nav_expect_done: repush! CssParser::parseImport(): @import /layout/style.css Nav_open_url: new url='http://dragcave.net/login' Connecting to 38.101.121.19 CssParser::parseImport(): @import /layout/style.css Nav_open_url: new url='http://api.recaptcha.net/noscript?k=6LcrhgUAAAAAADK0fngEdAvVoD9-GQBOHvaYb0Wp' Dns_server [0]: api.recaptcha.net is 69.12.97.165 Connecting to 69.12.97.165 Nav_open_url: new url='http://www.google.com/recaptcha/api/noscript?k=6LcrhgUAAAAAADK0fngEdAvVoD9-…' Dns_server [0]: www.google.com is 173.194.33.104 Connecting to 173.194.33.104 HTTP warning: unhandled MIME type: "image/jpeg" I did a test of inserting a link to a jpeg image in the address bar, and instead of loading it, and I got this in the console: Nav_open_url: new url='http://www.1969-camaro.com/images/1969camaro1.jpg' Dns_server [0]: www.1969-camaro.com is 72.9.233.117 Connecting to 72.9.233.117 Content-Type 'image/jpeg' not viewable. a_UIcmd_save_link: (null) Of course it did not load the image, but the save image dialog box came up instead.? Have I somehow compiled it in such a way so as to not allow it to render jpeg images?? (The 'allow images' under the tools dialogue is checked, and the browser does load pngs.) _________________________________________________________________ Turn down-time into play-time with Messenger games http://go.microsoft.com/?linkid=9734385

July 24, 2010

captcha image not loading

by corvid＠lavabit.com

Rob wrote: > I just finished building dillo 2.2 on my fresh OpenSuse 11.3 install.? I got the source for FLTK-2.0.x-r7690 (I had also managed to find an older version r6916, but it seemed to make no difference, other than that the latest version compiled with less warnings) and it compiled and installed fine.? I followed the directions found here: > > http://www.dillo.org/source.html > > Now before my system upgrade, my wife had been using dillo on a certain site successfully.? She had a cookiesrc in her .dillo folder, which had an entry for the site.? There is a captcha system on the site that seemed to work well until today.? I started dillo from the console to see if I could learn anything, but I was not able to make much of it other than I might need to add a couple of more sites to cookiesrc.? Here is some of the output from a session: > > public suffix of dragcave.net is dragcave.net > public suffix of dragcave.net is dragcave.net > ALLOW > public suffix of dragcave.net is dragcave.net > public suffix of ppntop50.com is ppntop50.com > DENY > Nav_open_url: new url='http://api.recaptcha.net/noscript?k=6LcrhgUAAAAAADK0fngEdAvVoD9-GQBOHvaYb0Wp' > Dns_server [0]: api.recaptcha.net is 69.12.97.165 > Connecting to 69.12.97.165 > Nav_open_url: new url='http://www.google.com/recaptcha/api/noscript?k=6LcrhgUAAAAAADK0fngEdAvVoD9-…' > public suffix of api.recaptcha.net is recaptcha.net > public suffix of www.google.com is google.com > DENY > > That is just the last little bit, including the part generated when I request an verification image from captcha.? You can see how the site works here: > > http://dragcave.net/login > > Here is what I have in .dillo/cookiesrc: > > DEFAULT DENY > > dragcave.net ACCEPT > google.com ACCEPT_SESSION > api.recaptcha.net ACCEPT_SESSION > > I have also tried just plain 'ACCEPT' for the latter two entries. It sounds like you're using the current dillo code instead of the 2.2 release. If you put "filter_auto_requests=allow_all" in dillorc, it should go back to the behaviour of loading images that are from a different domain than that of the page.

July 23, 2010

captcha image not loading

by mr_semantics＠hotmail.com

I just finished building dillo 2.2 on my fresh OpenSuse 11.3 install.? I got the source for FLTK-2.0.x-r7690 (I had also managed to find an older version r6916, but it seemed to make no difference, other than that the latest version compiled with less warnings) and it compiled and installed fine.? I followed the directions found here: http://www.dillo.org/source.html Now before my system upgrade, my wife had been using dillo on a certain site successfully.? She had a cookiesrc in her .dillo folder, which had an entry for the site.? There is a captcha system on the site that seemed to work well until today.? I started dillo from the console to see if I could learn anything, but I was not able to make much of it other than I might need to add a couple of more sites to cookiesrc.? Here is some of the output from a session: public suffix of dragcave.net is dragcave.net public suffix of dragcave.net is dragcave.net ALLOW public suffix of dragcave.net is dragcave.net public suffix of ppntop50.com is ppntop50.com DENY Nav_open_url: new url='http://api.recaptcha.net/noscript?k=6LcrhgUAAAAAADK0fngEdAvVoD9-GQBOHvaYb0Wp' Dns_server [0]: api.recaptcha.net is 69.12.97.165 Connecting to 69.12.97.165 Nav_open_url: new url='http://www.google.com/recaptcha/api/noscript?k=6LcrhgUAAAAAADK0fngEdAvVoD9-…' public suffix of api.recaptcha.net is recaptcha.net public suffix of www.google.com is google.com DENY That is just the last little bit, including the part generated when I request an verification image from captcha.? You can see how the site works here: http://dragcave.net/login Here is what I have in .dillo/cookiesrc: DEFAULT DENY dragcave.net ACCEPT google.com ACCEPT_SESSION api.recaptcha.net ACCEPT_SESSION I have also tried just plain 'ACCEPT' for the latter two entries. Finally, I hope that this message is appropriate for this list.? Rob S. _________________________________________________________________ MSN Dating: Find someone special. Start now. http://go.microsoft.com/?linkid=9734384

July 23, 2010

Can't copy/paste, only urls

by rogerx＠sdf.org

Here's a quick strace. I'm pretty sure I'm pasting events happening during the mouse copy/paste, just prior to Dillo accepting the input into it's url box. select(4, [3], [], [], NULL) = 1 (in [3]) read(3, "\4\2\2567\224\252\\\0007\3\0\0\4\0\240\0\0\0\0\0P\1-\2O\1\31\2\0\0\1\0", 4096) = 32 read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) poll([{fd=3, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=3, revents=POLLOUT}]) writev(3, [{"\30\0\6\0\4\0\240\0\1\0\0\0\4\1\0\0\1\0\0\0\224\252\\\0", 24}, {NULL, 0}, {"", 0}], 3) = 24 read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) select(4, [3], [], [], NULL) = 1 (in [3]) read(3, "\237\0\2577\224\252\\\0\4\0\240\0\1\0\0\0\4\1\0\0\1\0\0\0\0\0\0\0\0\0\0\0", 4096) = 32 read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) poll([{fd=3, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=3, revents=POLLOUT}]) writev(3, [{"\24\1\6\0\4\0\240\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0", 24}, {NULL, 0}, {"", 0}], 3) = 24 poll([{fd=3, events=POLLIN}], 1, -1) = 1 ([{fd=3, revents=POLLIN}]) read(3, "\1 \2607\6\0\0\0\4\0\0\0\0\0\0\0\6\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 56 read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) poll([{fd=3, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=3, revents=POLLOUT}]) writev(3, [{"\30\1\6\0\4\0\240\0\1\0\0\0\2\1\0\0\1\0\0\0\224\252\\\0", 24}, {NULL, 0}, {"", 0}], 3) = 24 read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) select(4, [3], [], [], NULL) = 1 (in [3]) read(3, "\237\0\2617\224\252\\\0\4\0\240\0\1\0\0\0\2\1\0\0\1\0\0\0\0\0\0\0\0\0\0\0", 4096) = 32 read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) poll([{fd=3, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=3, revents=POLLOUT}]) writev(3, [{"\24\1\6\0\4\0\240\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0", 24}, {NULL, 0}, {"", 0}], 3) = 24 poll([{fd=3, events=POLLIN}], 1, -1) = 1 ([{fd=3, revents=POLLIN}]) read(3, "\1\10\2627\3\0\0\0\2\1\0\0\0\0\0\0\n\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 44 read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) write(1, "Nav_open_url: new url='http://op"..., 42Nav_open_url: new url='http://openoffice' ) = 42 gettimeofday({1279904679, 371893}, NULL) = 0 clone(child_stack=0xb7327474, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0xb7327bd8, {entry_number:6, base_addr:0xb7327b70, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}, child_tidptr=0xb7327bd8) = 13078 read(3, 0x816e880, 4096) = -1 EAGAIN (Resource temporarily unavailable) gettimeofday({1279904679, 372378}, NULL) = 0 poll([{fd=3, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=3, revents=POLLOUT}]) writev(3, [{";\3\5\0\7\0\240\0\0\0\0\0\22\0.\0\212\2\30\0\226\6\5\0\37\1\240\0\0\0\0\0"..., 16372}, {NULL, 0}, {"", 0}], 3DNS error: HOST_NOT_FOUND Dns_server [0]: openoffice is (nil) ) = 16372 I figure, if strace is catching this, the event is going to be just prior to Nav_open_url. I am seeing a lot of EAGAIN (Resource temporarily unavailable). <shrugs>

July 23, 2010

Can't copy/paste, only urls

by rogerx＠sdf.org

On Fri, Jul 23, 2010 at 09:24:59AM +0200, Johannes Hofmann wrote: >> And still, copy/pasting always causes the copy buffer to end-up within the >> Dillo url entry field. :-/ >> >> As such, it's likely cairo isn't the culprit here. > > >Ok, can you test pasting with the test programs from your fltk >build, e.g. test/input? I just noticed your email. Oh wow, there's this tool called "/usr/bin/fluid2" within the FLTK package. But still, README's state little to nothing about getting good debug output (except likely only through GDB when something bad happens). Neat. Yes, I can copy past into the widgets/windows in this tool. Just tried. So this (kind of) narrows things down to Dillo. Dillo debug output states very little. I'll try stracing it later on today. ;-)

July 23, 2010

Re: Can't copy/paste, only urls

by rogerx＠sdf.org

On Fri, Jul 23, 2010 at 08:46:44AM -0400, Dennis Nezic wrote: >On Wed, 21 Jul 2010 10:50:01 -0800, Roger wrote: >> On Wed, Jul 21, 2010 at 10:29:32AM -0400, Jorge Arellano Cid wrote: >> >On Wed, Jul 21, 2010 at 01:29:36PM +0200, Johannes Hofmann wrote: >> >> On Wed, Jul 21, 2010 at 12:48:10AM -0800, Roger wrote: >> >> > I think this is already answered within the FAQ, but just in >> >> > case it isn't, I seem not to be able to copy & paste into form >> >> > input boxes. >> >> > >> >> > When I do try to "middle mouse button" copy/paste, my output >> >> > goes into the url entry field of the browser instead of where I >> >> > intended to paste a form input box. >> >> >> >> This seems to work ok for me - at least when I tried with google. >> >> But I remember that we have some focus related problems recently. >> > >> > Here it works. I don't even need to focus the place to paste, >> >the cursor over the widget is enough (FLTK2 v7513). >> >> =x11-libs/fltk-2.0_pre6970 cairo debug doc examples games +jpeg >> opengl +png threads +xft xinerama +zlib >> >> =www-client/dillo-2.2 doc +gif ipv6 +jpeg +png +ssl > >I also use Gentoo (same versions, fltk2 built without cairo), but >I'm not experiencing your problem. Does it not paste properly even if >you're typing in the form's input box -- ie. if you're sure it has >focus? (ie. I assume besides pasting into the address bar, your >keystrokes will also go there?) ...even if I'm typing. (See my previous postings on this thread.) I am sure, that I'm am sure, of course I'm sure. Once I left click in the url bar of dillo, I have no problems typing within the url box. (I don't think Dillo/FLTK accepts ctrl-v for pasting.) >> When you state "focus problems", I would assume you're talking about >> when fltk/dillo borks on my focus problem and screws up what I'm >> typing into the focus box -- until I press ctrl+tab (or switch >> virtual desktops, then switch back again to the dillo virtual >> desktop). > >This sounds ... pertinent :b. It sounds relevant, but only a symptom of the problem. This may all get down to the issue of "focus". The url box of dillo always has focus with the mouse. The mouse can click and use Dillo normally. I can use the keyboard to enter form data. But when it gets to copy/paste, the mouse always puts it's copy buffer into the url box. It is completely amazing you use Gentoo as well, and don't see any of these problems. Just prior to wiping and doing a clean install of Gentoo (to reduce bloat -- and the fact I haven't done a clean install in 5+ years), I was seeing the same problems with the mouse copy/paste buffer in Dillo, along with it on my other laptops and computers. After reinstalling on all three systems, I am still seeing this same problem. Would be great to hear the code responsible for this clicking issue so I can try to dump some debug output. FLTK is responsible correct? For what it's worth, here's something from GDB (compiling fltk & dillo with debug flags): (Action -> mouse button paste in google form box) Nav_open_url: new url='Thisisfreesoftware:youarefreetochangeandredistributeit.' Dpi_get_server_port: can't read server port from dpid. ** ERROR **: dpi.c: can't start dpi daemon ... wow... looky all the debug info just flow out GDB! :-/

July 23, 2010

Re: Can't copy/paste, only urls

by dennisn＠dennisn.dyndns.org

On Wed, 21 Jul 2010 10:50:01 -0800, Roger wrote: > On Wed, Jul 21, 2010 at 10:29:32AM -0400, Jorge Arellano Cid wrote: > >On Wed, Jul 21, 2010 at 01:29:36PM +0200, Johannes Hofmann wrote: > >> On Wed, Jul 21, 2010 at 12:48:10AM -0800, Roger wrote: > >> > I think this is already answered within the FAQ, but just in > >> > case it isn't, I seem not to be able to copy & paste into form > >> > input boxes. > >> > > >> > When I do try to "middle mouse button" copy/paste, my output > >> > goes into the url entry field of the browser instead of where I > >> > intended to paste a form input box. > >> > >> This seems to work ok for me - at least when I tried with google. > >> But I remember that we have some focus related problems recently. > > > > Here it works. I don't even need to focus the place to paste, > >the cursor over the widget is enough (FLTK2 v7513). > > =x11-libs/fltk-2.0_pre6970 cairo debug doc examples games +jpeg > opengl +png threads +xft xinerama +zlib > > =www-client/dillo-2.2 doc +gif ipv6 +jpeg +png +ssl I also use Gentoo (same versions, fltk2 built without cairo), but I'm not experiencing your problem. Does it not paste properly even if you're typing in the form's input box -- ie. if you're sure it has focus? (ie. I assume besides pasting into the address bar, your keystrokes will also go there?) > When you state "focus problems", I would assume you're talking about > when fltk/dillo borks on my focus problem and screws up what I'm > typing into the focus box -- until I press ctrl+tab (or switch > virtual desktops, then switch back again to the dillo virtual > desktop). This sounds ... pertinent :b.

July 23, 2010