February 2010 - Dillo-dev - lists.mailman3.com

earthquake

by jcid＠dillo.org

On Sat, Feb 27, 2010 at 06:09:25PM +0000, corvid wrote: > Johannes wrote: > > On Sat, Feb 27, 2010 at 02:19:07PM -0300, Jorge Arellano Cid wrote: > > > Hi, > > > > > > Just in case you hear/read something related to the earthquake > > > in Chile, it was stronger than the one in 1985, but we're OK and > > > although we're in the central part of the country, it is roughly > > > 400 Km. north from the more affected area. > > > > > > You'll see impressive images, but that's not the main part, > > > it's just a "front page" photo impact. This country is full of > > > quake-resistant buildings, and usually the ones that collapse are > > > the oldest ones or the new structures were people decided to > > > steal money (as with the elevated highways). > > > > > > The situation is complex but under control. > > > > It's good to hear that you are ok! > > Yes indeed! > > I was reading about how impressively well-built the area is for > withstanding earthquakes. True. It is impressive how Santiago (capital, where I live) resisted the strong earthquake. There're thousands of buildings (7.5 million pp. live here), and just a few are down. This includes lots of buildings above 20 stories and some towers with 50 or more. The subway net is operating almost 100% today. Unfortunately in the southern part of the country, close to the shore, it was tragic. After the earthquake tsunamis came, and devastation in small towns is total. The rural zone is sparsely populated, and people know by experience it's better to go to the hills just in case the sea comes back with huge waves (as we also know that earthquakes in Japan mean large waves in 12 or 24 hours). I hope these facts help the final number of dead people to be under 3000. Currently the official number is around 500, but the situation is not fully evaluated and there are isolated zones still. -- Cheers Jorge.-

Feb. 28, 2010

earthquake

by onepoint＠starurchin.org

Good to hear Jorge is OK! On Sat, Feb 27, 2010 at 06:09:25PM +0000, corvid wrote: > I was reading about how impressively well-built the area is for > withstanding earthquakes. I've heard it said that "Earthquakes don't kill people, buildings do!". Regards, Jeremy Henty

Feb. 28, 2010

Problems viewing page source

by andreas＠kemnade.info

Hi Jorge, On Fri, 26 Feb 2010 21:02:58 -0300 Jorge Arellano Cid <jcid(a)dillo.org> wrote: > On Thu, Feb 25, 2010 at 09:23:51PM +0100, Andreas Kemnade wrote: > > Hi, > > > > when I open > > http://misc.andi.de1.cc/dillo > > and I right-click on the page and select "View page source", > > I can see the html source. > > Contrary: > > http://misc.andi.de1.cc/dillo/?dillo > > > > The ?dillo is ignored by the server, so the same page is displayed. > > But I cannot get the source for the page. Dillo shows simply an empty > > tab then. > > Right. Please test the patch in the repo. > Thanks for fixing that. If the menu pops up it displays something. But sometimes it displays not what I want. http://misc.andi.de1.cc/viewsource.php is an example for another view source problem. Select something, click on send. Now select "View page source". You'll see the source of the previous page! That is not what I expect. Contrary: close dillo open it again with http://misc.andi.de1.cc/viewsource.php?dillo Now click again on send and try to view the source. Now you get [vsource dpi]: ERROR: Page not cached. At least saving the page is possible to analyse things and at least it is not displaying something wrong. Greetings Andreas Kemnade PS: Good to hear that you are ok.

Feb. 27, 2010

Right click menu does not pop up

by corvid＠lavabit.com

Andreas wrote: > in > http://misc.andi.de1.cc/testtab.html > > the right click menu does not pop up in one of the table cells. > The cell is empty. An   is enough to make it work. I figured this was due to my linkEmitter code, but it turned out to be a selection thing. Starting selection by clicking on the empty cell wasn't working either. Johannes: You know iterators and highlighting far better than I do; what do you think of the following? I don't really know what to be careful about with all of that. What I have just changes the if (words->size () == 0) case in sendSelectionEvent(), plus empty-textblock tests for highlighting to keep queueDrawRange() from getting unhappy.

Feb. 27, 2010

earthquake

by corvid＠lavabit.com

Johannes wrote: > On Sat, Feb 27, 2010 at 02:19:07PM -0300, Jorge Arellano Cid wrote: > > Hi, > > > > Just in case you hear/read something related to the earthquake > > in Chile, it was stronger than the one in 1985, but we're OK and > > although we're in the central part of the country, it is roughly > > 400 Km. north from the more affected area. > > > > You'll see impressive images, but that's not the main part, > > it's just a "front page" photo impact. This country is full of > > quake-resistant buildings, and usually the ones that collapse are > > the oldest ones or the new structures were people decided to > > steal money (as with the elevated highways). > > > > The situation is complex but under control. > > It's good to hear that you are ok! Yes indeed! I was reading about how impressively well-built the area is for withstanding earthquakes. Around here (Cascadia subduction zone), there are extremely serious earthquakes more like once every 500 years, so I don't think it would go well for us...

Feb. 27, 2010

earthquake

by Johannes.Hofmann＠gmx.de

Hi Jorge, On Sat, Feb 27, 2010 at 02:19:07PM -0300, Jorge Arellano Cid wrote: > Hi, > > Just in case you hear/read something related to the earthquake > in Chile, it was stronger than the one in 1985, but we're OK and > although we're in the central part of the country, it is roughly > 400 Km. north from the more affected area. > > You'll see impressive images, but that's not the main part, > it's just a "front page" photo impact. This country is full of > quake-resistant buildings, and usually the ones that collapse are > the oldest ones or the new structures were people decided to > steal money (as with the elevated highways). > > The situation is complex but under control. It's good to hear that you are ok! Cheers, Johannes

Feb. 27, 2010

earthquake

by jcid＠dillo.org

Hi, Just in case you hear/read something related to the earthquake in Chile, it was stronger than the one in 1985, but we're OK and although we're in the central part of the country, it is roughly 400 Km. north from the more affected area. You'll see impressive images, but that's not the main part, it's just a "front page" photo impact. This country is full of quake-resistant buildings, and usually the ones that collapse are the oldest ones or the new structures were people decided to steal money (as with the elevated highways). The situation is complex but under control. -- Cheers Jorge.-

Feb. 27, 2010

dillo 2.2 rpms?

by jcid＠dillo.org

On Thu, Feb 25, 2010 at 11:13:30PM +0100, Johannes Hofmann wrote: > Hi, > > thanks to Kelson Vibber providing his .spec files for dillo2 I was > able to build some dillo-2.2 RPMs for > > Fedora 10,11,12, and RHEL_5 > each for i386 and x86_64. > > These RPMs can be found at > http://download.opensuse.org/repositories/home:/jh33/ > in the corresponding subdirectories. > > Note, that they are untested and should be considered preliminary > until we get reports from people actually using these platforms. > > I also disabled all icon and menu handling, as I can't test it. OK, I updated the download page, but left the RPM link commented out in the source. -- Cheers Jorge.-

Feb. 27, 2010

Problems viewing page source

by jcid＠dillo.org

On Thu, Feb 25, 2010 at 09:23:51PM +0100, Andreas Kemnade wrote: > Hi, > > when I open > http://misc.andi.de1.cc/dillo > and I right-click on the page and select "View page source", > I can see the html source. > Contrary: > http://misc.andi.de1.cc/dillo/?dillo > > The ?dillo is ignored by the server, so the same page is displayed. > But I cannot get the source for the page. Dillo shows simply an empty > tab then. Right. Please test the patch in the repo. -- Cheers Jorge.-

Feb. 27, 2010

Re: fullwindow_start=YES config doesn't work with 2.2

by Johannes.Hofmann＠gmx.de

On Fri, Feb 26, 2010 at 07:47:55PM -0300, Jorge Arellano Cid wrote: > On Thu, Feb 25, 2010 at 06:25:59PM +0100, Johannes Hofmann wrote: > > On Wed, Feb 24, 2010 at 02:47:26PM -0500, Dennis Nezic wrote: > > > On Wed, 24 Feb 2010 14:22:01 -0300, Jorge Arellano Cid wrote: > > > > On Wed, Feb 24, 2010 at 10:24:02AM -0500, Dennis Nezic wrote: > > > > > When dillorc's fullwindow_start=YES (which is supposed to hide the > > > > > widget panels on startup), it doesn't actually do this. (It does > > > > > hide it after you click on a link or type in a url.) My guess is it > > > > > was assumed that the first thing you want to do when opening a > > > > > browser is to type in a url (or click a bookmark link, etc) -- but > > > > > this is not true. (Many times I want to simply load a single page > > > > > and then close it.) > > > > > > > > It's a bug! > > > > > > > > Please check how the patch in current repository works for you. > > > > > > Works great! Thanks! > > > > I see an issue with the current fix. It never focusses location in > > fullscreen mode for new windows. > > So when opening a new empty window (e.g. Ctrl-N) in fullscreen mode, > > the location bar is not focussed. > > > > Jorge, what do you think about the alternative fix below. It sticks > > to the principle stated in the comment in UIcmd_open_url_nbw(). > > It looks & feels OK to me. > > I made some changes so Bookmarks, Home and Open File follow the > same behaviour. > Note: when dillo starts fullscreen and the bw is toggled to > normal with Ctrl-Space, a new bw (tab or window) follows the > panel status of the issuing bw, which is correct IMO. > > Please check the attached patch. Committed! Thanks, Johannes

Feb. 27, 2010