Hi Alan, A fellow user of the irex iliad tried to compile dillo2 for it (PXA255) and had similar issues with fltk2 (it was http://www.mobileread.com/forums/showpost.php?p=301183&postcount=84 ). Would you mind posting the configure flags that you have used for kdrive, fltk2 and dillo2? Thanks a lot. Hope that those configure also works for the iliad and we can replace the aging dillo 0.8.6 O:). Best regards and thanks again to all involved in dillo development. Dario. --- El mi?, 8/7/09, Alan Carvalho de Assis <acassis@gmail.com> escribi?:
De: Alan Carvalho de Assis <acassis@gmail.com> Asunto: [Dillo-dev] Re: [fltk.general] Cross-compiling Dillo to ARM Para: "Mirror of fltk.general Newsgroup" <fltk@easysw.com> CC: "dillo-dev" <dillo-dev@dillo.org> Fecha: mi?rcoles, 8 julio, 2009 8:58 Hi Ian,
On 7/8/09, imacarthur <imacarthur@gmail.com> wrote:
On 8 Jul 2009, at 16:33, Alan Carvalho de Assis
wrote:
fltk-2 is not my strong suit, so what follows is just
really. However, here are some questions that might be relevant:
What fonts does your target system actually have installed? Which names, what types, etc.?
Now, the reason I ask is that I see from the gdb trace
guesswork that your
program crashed in Font_xlfd.cxx, so presumably it was attempting to load an "old style" XLFD font.
You say your test build works with fltk-1.3, and it defaults to using "new-style" XFT fonts, rather than using XLFD fonts (although it can also use XLFD fonts, *or* can be built to only use XLFD fonts by passing --disable-xft to configure at build time.)
So... I'm guessing that the fltk-1.3 build works for some reason because it is using XFT and the fltk-2 build fails because it attempts to use XLFD. Does that seem feasible?
If so, it might be worth trying to make sure the fltk-2 build loads an XFT rather than XLFD font, see how that goes.
All that said, however, a default flrk-2 build *ought* to default to XFT enabled anyway - unless someone has changed that?
Did you later that setting during config by any chance? Maybe that is somewhere to start looking, if nothing else...
You are right, I compiled Xorg (kdrive) with "--enable-builtin-fonts", then FLTK2 doesn't work.
I think FLTK2 could to work with only "fixed" font, just like FLTK1 does.
Thank you very much!
Regards,
P.S.: Dillo is working fine on i.MX27 now!
_______________________________________________ Dillo-dev mailing list Dillo-dev@dillo.org http://lists.auriga.wearlab.de/cgi-bin/mailman/listinfo/dillo-dev